/**
* @page Examples Examples
*
* Here is a page with examples.
*
* @li @ref Example_Edje_Basics
* @li @ref tutorial_edje_swallow
* @li @ref tutorial_edje_text
* @li @ref tutorial_edje_table
* @li @ref tutorial_edje_color_class
* @li @ref Example_Edje_Signals_Messages
* @li @ref tutorial_edje_box
* @li @ref tutorial_edje_box2
* @li @ref tutorial_edje_drag
* @li @ref tutorial_edje_perspective
* @li @ref tutorial_edje_animations
* @li @ref tutorial_edje_multisense
*/
/**
* @page Example_Edje_Basics Edje basics example
*
* In this example, we illustrate how to start using the Edje library,
* with the very basic one needs to instantiate an Edje object.
*
* We place, in the canvas, an Edje object along with a @b red border
* image to delimit its geometry. After we instantiate the Edje
* object, we @b have to set a file and a group, within that file, to
* bind to it. For this example, we're using an EDC file which
* declares two parts (blue and green rectangles) and an item data:
* @include basic.edc
*
* We start by trying to acces an @b unexistant group in the file, so
* that you can see the usefulness of edje_object_load_error_get() and
* edje_load_error_str(). Check that the error message will tell you
* just that -- a group which didn't exist in the file was called for:
* @dontinclude edje-basic.c
* @skip file_path
* @until file_path
* @dontinclude edje-basic.c
* @skip edje_object_add
* @until }
*
* Than, we finally bind our Edje object to @c "example_group",
* printing a message afterwards:
* @dontinclude edje-basic.c
* @skip file_path, "example_group"
* @until object_show
*
* What follows is a series of Edje API calls which are of general
* use. The first of them is edje_object_data_get(), which we use to
* get the value we have put in the @c "example_data" data field, in
* our EDC object declaration:
* @dontinclude edje-basic.c
* @skip data field in group
* @until ;
*
* Than, we exemplify edje_object_part_exists():
* @dontinclude edje-basic.c
* @skip Testing if
* @until ;
*
* The next call is to query @c "part_one"'s geometry, relative to the
* whole Edje object's area. The part will be situated in the middle
* of the Edje object's, because it has a restricted forced size (we
* set its minimum size equal to its maximum, for that) and, by
* default, parts are aligned to the center of their containers:
* @dontinclude edje-basic.c
* @skip part_geometry_get
* @until x, y, w, h
*
* We can grab a direct pointer on the rectangle implementing @c
* "part_one", by using edje_object_part_object_get(). Since we are
* not allowed to set properties on it, we just check its color, to
* assure its really blue, as declared in the EDC:
* @dontinclude edje-basic.c
* @skip color_get
* @until x, y, w, h
*
* The @c "min" and @c "max" EDC properties can be queried with the
* following calls:
* @dontinclude edje-basic.c
* @skip max_get
* @until min. size is
*
* The next two calls are to make size calculations on our
* object. Because of the minumim size declared for @c "part_one" part's
* default state description, that will be our exact minimum
* size calculated for the group (remember the @c "min" declaration at
* group level is just a @b hint, not an enforcement). We then
* exercise the edje_object_size_min_restricted_calc() function,
* passing a minimum size of 500, in each axis. Since we have @b no
* object bigger than that, it will be the minimum size calculated, in
* the end:
* @dontinclude edje-basic.c
* @skip min_calc
* @until size calculation is
*
* @c "part_two" part is there with a purpose: since it extrapolates
* the Edje object's boundaries, the edje_object_parts_extends_calc()
* function will report origin coordinates for the rectangle grouping
* both parts with @b negative values, indicating it extrapolates to
* the upper left of our group, just as we see it.
*
* To interact with the last features exemplified in the program,
* there's a command line interface. A help string can be asked for
* with the 'h' key:
* @dontinclude edje-basic.c
* @skip commands
* @until ;
*
* Those commands will change the scaling factors of our Edje objects.
* The first of them, @c 's', will change Edje's @b global scaling
* factor between @c 1.0 (no scaling) and @c 2.0 (double
* scale). Scaling will be applied to @c "part_one", only, because
* that's the part flagged to be scaled at EDC level:
* @dontinclude edje-basic.c
* @skip strcmp(ev->keyname, "s") == 0
* @until }
*
* Note, finally, that the @c 's' command will depend on the 'r' one
* to have its effects applied. The latter will change @c "part_one"'s
* @b individual scaling factor, which @b overrides Edje's global
* scaling factor. Only when the individual one is set to zero, will
* the global one take effect:
* @dontinclude edje-basic.c
* @skip strcmp(ev->keyname, "r") == 0
* @until }
*
*
*
* The example's window should look like this picture:
*
* @image html edje-basics-example.png
* @image rtf edje-basics-example.png
* @image latex edje-basics-example.eps width=\textwidth
*
* The full example follows.
*
*
* @include edje-basic.c
*
* To compile use this command:
* @verbatim
* gcc -o edje-basic edje-basic.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc basic.edc
* @endverbatim
* @example edje-basic.c
*/
/**
* @page tutorial_edje_swallow Swallow example
* @dontinclude edje-swallow.c
*
* This is a simple example in which we create a rect and swallow it.
*
* Focusing on the relevant parts of the code we go right to the creation of our
* rectangle. It should be noted that we don't resize or show our rect, that is
* because when an object is swallowed it's geometry and visibility is
* controlled by the theme:
* @skip 20
* @skipline evas_object_rectangle_add
* @until swallow
*
* The other bit of code that is relevant to us now is our check that the
* swallow worked:
* @until printf
*
* The full source code follows:
* @include edje-swallow.c
*
* To compile use this command:
* @verbatim
* gcc -o edje-swallow edje-swallow.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc swallow.edc
* @endverbatim
* @example edje-swallow.c
*/
/**
* @page tutorial_edje_text Edje Text example
* @dontinclude edje-text.c
*
* This example shows how to manipulate TEXT and TEXTBLOCK parts from code.
*
* The very first we are going to do is register a callback to react to changes
* in the text of our parts:
* @skip _on_destroy
* @skip static void
* @until }
*
* @skipline text_change
* @note Since edje_obj represent a group we'll be notified whenever any part's
* text in that group changes.
*
* We now set the text for two our two parts:
* @until text_set
* @until text_set
* @note Since the "part_two" part is a TEXTBLOCK we can use formatting such as
* @
*
* And we now move on to selection issues, first thing we do is make sure the
* user can select text:
* @until select_allow
*
* We then select the entire text, and print the selected text:
* @until printf
*
* We now unselect the entire text(set selection to none), and print the
* selected text:
* @until printf
*
* Our example will look like this:
*
* @image html edje-text.png
* @image rtf edje-text.png
* @image latex edje-text.eps width=\textwidth
*
* The full source code follows:
* @include edje-text.c
* @example edje-text.c
*
* The theme used in this example is:
* @include text.edc
*
* To compile use this command:
* @verbatim
* gcc -o edje-text edje-text.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc text.edc
* @endverbatim
* @example edje-text.c
*/
/**
* @page tutorial_edje_table Table example
*
* In this example, we illustrate how to organize your objects on a table, using
* the edje_object_part_table functions. To be easier to understand the objects
* in this example will be four simple rects, when the user click over one
* item with the left button its is removed from the table, if any other button
* was used all items are removed. For each action is printed a message with
* the current number of rows and columns.
*
* We started creating an EDC file with one part of the type TABLE called
* @b "table_part", that is the part which we will refer to access the table:
* @include table.edc
*
* On the other hand, in the C file we first create the rectangles and added a
* callback for mouse down, as you can see bellow:
* @dontinclude edje-table.c
* @skip _rects_create
* @until }
* @skip }
* @until }
*
* With the objects created we have to pack them into the table, to do this, we
* just have to use the function edje_object_part_table_pack().
* @dontinclude edje-table.c
* @skip (!edje_object_part_table_pack
* @until 4
*
* The other bit of code that is relevant to us now is our event handler for
* when the user click over the rectangle. Here we use the function
* edje_object_part_table_unpack() to remove the item from the table or
* edje_object_part_table_clear() to remove all items, it depends on which mouse
* button the user uses.
* @dontinclude edje-table.c
* @skip _on_mouse_down
* @until }
*
* Finally, the last important thing in this example is about how to know how many
* columns and rows are there in the table, It should be noted that this function
* don't tell you how many items are there in the table, just the number of the
* columns and rows of the table.
* @dontinclude edje-table.c
* @skip _columns_rows_
* @until }
*
* The example's window should look like this picture:
*
* @image html edje-table-example.png
* @image rtf edje-table-example.png
* @image latex edje-table-example.eps width=\textwidth
*
* The full source code follows:
* @include edje-table.c
*
* To compile use this command:
* @verbatim
* gcc -o edje-table edje-table.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc table.edc
* @endverbatim
* @example edje-table.c
*/
/**
* @page tutorial_edje_box Box example - basic usage
*
* This example shows how to append, insert and remove elements from an Edje box
* part. It will make use of the edje_object_part_box functions.
*
* To play with this example, use mouse left click to delete an existing
* rectangle from the box and right mouse click to add a new rectangle just
* before the clicked one. Use the keyboard keys "a" to append a rectangle, "i"
* to prepend, and "c" to remove all rectangles from the box.
*
* We will store our example global information in the data structure defined
* below, and also set some callbacks for resizing the canvas and exiting the
* window:
*
* @dontinclude edje-box.c
* @skip static const char
* @until ecore_evas_geometry_get
* @until }
*
* In the @c main function, we create our @c Ecore_Evas, add a background to it,
* and finally load our @c Edje file that contains a @c Box part. This part is
* named @c "example/box" in this case, and we use this name to append elements
* to it.
*
* The code until now is the one that follows:
*
* @dontinclude edje-box.c
* @skip main(int argc __UNUSED__, char *argv[])
* @until ecore_evas_data_set(ee, "background", bg)
*
* Also notice that we set the callback @c _bg_key_down for @c "key down" events
* on the background object, and that object is the one with focus.
*
* Now we add some small rectangles to the box part, using the
* edje_object_part_box_append() API, and set some callbacks for @c "mouse down"
* events on every object. These callbacks will be used to add or delete objects
* from the box part.
*
* @dontinclude edje-box.c
* @skip bg = evas_object_rectangle_add(evas)
* @until evas_object_event
* @until }
*
* Now let's take a look at the callbacks for key down and mouse down events:
*
* @dontinclude edje-box.c
* @skip ecore_evas_geometry_get
* @skip static
* @until evas_object_event
* @until }
* @until }
*
* This callback for mouse down events will get left clicks and remove the
* object that received that left click from the box part, and then delete it.
* This is done with the edje_object_part_box_remove() function.
*
* However, on right clicks it will create a new rectangle object, and add it
* just before the right clicked object, using
* edje_object_part_box_insert_before().
*
* And this is the key down callback:
*
* @until remove_all
* @until }
*
* It will insert elements at the beginning of the box if "i" was pressed, using
* edje_object_part_box_insert_at(). It will also append objects to the box if
* "a" was pressed, just exactly like we did in the @c main function. And will
* remove all objects (deleting them) if "c" was pressed.
*
* As you can see, this example uses the @c "horizontal_flow" layout for the
* box, where each item is put linearly in rows, in as many rows as necessary to
* store all of them.
*
* The example's window should look like this picture:
*
* @image html edje-box-example.png
* @image rtf edje-box-example.png
* @image latex edje-box-example.eps width=\textwidth
*
* The full source code follows:
* @include edje-box.c
*
* To compile use this command:
* @verbatim
* gcc -o edje-box edje-box.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc box.edc
* @endverbatim
* @example edje-box.c
*/
/**
* @page tutorial_edje_box2 Box example - custom layout
*
* This example shows how to register a custom layout to be used by the Edje box
* part. It will use edje_box_layout_register() for that.
*
* To play with this example, use the keyboard modifier keys and number keys
* together. The Ctrl key is used for adding elements, and Shift is used for
* removing them. For instance, Ctrl + 3 will insert a new rectangle object in
* the 3rd position of the box, while Shift + 6 will try to remove the 6th
* element of the box.
*
* This example is very similar to the other box example, has a structure with
* global data, a callback for key down events where we create or delete
* rectangle objects and add or remove them to/from the box part.
*
* But the important part is the next one:
*
* @dontinclude edje-box2.c
* @skip static void
* @until }
*
* This code implements our custom layout, which will position every object
* added to the box in a diagonal through the size of the box part. Notice that
* it just calculates the position and offset based on the size of the box and
* number of children, and then moves each child to the respective position.
*
* Later on the @c main function, everything we need to do is to register this
* custom layout function with edje:
*
* @dontinclude edje-box2.c
* @skipline edje_box_layout_register
*
* And use it inside the box.edc file:
*
* @dontinclude box.edc
* @skip example/group2
* @skip example/title
* @skip part
* @until BOX
* @until example/box
*
* The example's window should look like this picture:
*
* @image html edje-box2-example.png
* @image rtf edje-box2-example.png
* @image latex edje-box2-example.eps width=\textwidth
*
* The full source code follows:
* @include edje-box2.c
*
* To compile use this command:
* @verbatim
* gcc -o edje-box2 edje-box2.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc box.edc
* @endverbatim
* @example edje-box2.c
*/
/**
* @page tutorial_edje_drag Dragable parts example
*
* This example shows how to manipulate a dragable part through the
* edje_object_part_drag API.
*
* First, in the edc code, we are declaring a part which will be our movable
* part, called "knob". It is a normal rectangle, which contains a block called
* "dragable", that will define the area where this rectangle can be moved, and
* in which axis it can be moved.
*
* This is our part:
*
* @dontinclude drag.edc
* @skip // drag_area
* @skip part
* @until example/knob
* @until example/knob
*
* Notice that it defines, through its @c "x:" and @c "y:' properties, that the
* part will be only moved on the y axis (vertical). Check the edc reference
* docs for more info about this.
*
* Now, in our example C code, we just do the same as on the other examples,
* setting some global data on a structure, load the edje file and so:
*
* @dontinclude edje-drag.c
* @skip value changed
* @skip }
* @skip int
* @until evas_object_show(app.edje)
*
* We want to use the drag_page and drag_step functions, and in order to do so we
* need to define the step size and page size of our dragable part. They are
* defined as float values which represent a portion of the entire size of the
* dragable area:
*
* @until drag page step
*
* We are going to use the keyboard to move the @c knob part, through the key
* down callback @c _bg_key_down, but we also want to know when the user has
* moved the knob by using the mouse (which is possible, since we defined that
* this part will receive mouse events). Thus, we set a callback for the signal
* "drag", which comes from the dragable part:
*
* @until _knob_moved_cb
*
* Now, let's take a look at our key down callback:
*
* @dontinclude edje-drag.c
* @skip _canvas_resize_cb
* @skip static
* @until unhandled key
* @until }
*
* On this callback we define that the user will use the "up" and "down" arrows
* to move the dragable part, respectively, -1.0 and 1.0 times the step size.
* And that the "Page Up" (Prior) and "Page Down" (Next) keys will move -1.0 and
* 1.0 times the page size. Both of these will occur on the vertical axis, since
* we pass 0.0 as value to the respective horizontal axis parameters. And our
* dragable part also only supports being moved in the vertical axis (defined in
* the edc).
*
* We also define that the "m" key will be used to explicitly position the knob
* part in the middle of the dragable area.
*
* And here is the callback for the @c "drag" signal that is received from the
* theme:
*
* @until }
*
* The example's window should look like this picture:
*
* @image html edje-drag-example.png
* @image rtf edje-drag-example.png
* @image latex edje-drag-example.eps width=\textwidth
*
* The full source code follows:
* @include edje-drag.c
*
* To compile use this command:
* @verbatim
* gcc -o edje-drag edje-drag.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\" -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc drag.edc
* @endverbatim
* @example edje-drag.c
*/
/**
* @page tutorial_edje_perspective Perspective example
*
* This example demonstrates how someone can set a perspective to be used by an
* Edje object, but setting a global perspective. The API for setting a
* perspective for just one Edje object is almost the same and it's trivial, so
* we are not doing that on this example.
*
* Let's go first to the main function, where we start creating our objects and
* loading the theme. We also set some variables that will be used globally in
* our program:
*
* @dontinclude edje-perspective.c
* @skip main(
* @until focal =
*
* A boolean is used to indicate that we are animating.
*
* We also set the @c app.x and @c app.y to (0, 0) because the original position
* of our text + rectangle part will be on top left. This is a convention that
* we are using in this example, and setting x, y to 1, 1 would mean bottom
* right. We do this to later define the name of the signals that we are
* sending to the theme.
*
* After this, some boilerplate code to load the theme:
*
* @until evas_object_show(app.edje)
*
* Now we are going to setup a callback to tell us that the animation has ended.
* We do this just to avoid sending signals to the theme while it's animating.
*
* @until edje_object_signal
*
* Finally, let's create our perspective object, define its position, focal
* distance and z plane position, and set it as global:
*
* @until global_set
*
* Notice that if we wanted to set it just to our edje object, instead of
* setting the perspective as global to the entire canvas, we could just use
* edje_object_perspective_set() instead of edje_perspective_global_set(). The
* rest of the code would be exactly the same.
*
* Now, let's take a look at what we do in our callbacks.
*
* The callback for key_down is converting the arrow keys to a signal that
* represents where we want our text and rectangle moved to. It does that by
* using the following function:
*
* @dontinclude edje-perspective.c
* @skip part_move(
* @until }
*
* Notice that, after sending the signal to the Edje object, we set our boolean
* to store that we are animating now. It will only be unset when we receive a
* signal from the theme that the animation has ended.
*
* Now, on the key_down code, we just call this function when the arrows or
* "PgUp" or "PgDown" keys are pressed:
*
* @until unhandled
* @until }
*
* Notice that we also do something else when the numeric keyboard "+" and "-"
* keys are pressed. We change the focal distance of our global perspective, and
* that will affect the part that has a map rotation applied to it, with
* perspective enabled. We also need to call edje_object_calc_force(), otherwise
* the Edje object has no way to know that we changed the global perspective.
*
* Try playing with these keys and see what happens to the animation when the
* value of the focal distance changes.
*
* Finally we add a callback for the animation ended signal:
*
* @until }
*
* The example's window should look like this picture:
*
* @image html edje-perspective-example.png
* @image rtf edje-perspective-example.png
* @image latex edje-perspective-example.eps width=\textwidth
*
* The full source code follows:
* @include edje-perspective.c
*
* The full .edc file
* @include perspective.edc
*
* To compile use this command:
* @verbatim
* gcc -o edje-perspective edje-perspective.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\"
* -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc perspective.edc
* @endverbatim
* @example edje-perspective.c
*/
/**
* @page Example_Edje_Signals_Messages Edje signals and messages
*
* In this example, we illustrate how Edje signals and Edje messages
* work.
*
* We place, in the canvas, an Edje object along with a @b red border
* image to delimit its geometry. The object's group definition is so
* that we have four parts:
* - a blue rectangle, aligned to the right
* - a white rectangle, aligned to the left
* - a text part, aligned to the center
* - a clipper rectangle on the blue rectangle
*
* The left rectangle is bound to a color class, so that we can
* multiply its colors by chosen values on the go:
* @dontinclude signals-messages.edc
* @until visible
* @until }
* @until }
* @until }
*
* The @c #define's on the beginning will serve as message
* identifiers, for our accorded message interface between the code
* and the this theme file.
*
* Let's move to the code, then. After instantiating the Edje object,
* we register two signal callbacks on it. The first one uses
* @b globbing, making all of the wheel mouse actions over the left
* rectangle to trigger @c _mouse_wheel_cb. Note that those kind of
* signals are generated @b internally (and automatically) in Edje. The
* second is a direct signal match, to a (custom) signal we defined in
* the EDC, ourselves:
* @dontinclude edje-signals-messages.c
* @skip edje_object_add
* @until _mouse_over_cb
* @dontinclude edje-signals-messages.c
* @skip print signals coming from theme
* @until }
* @until }
*
* That second callback is on a signal we emit on the theme, where we
* just translate Edje @c "mouse,move" internal events to the custom @c
* "mouse,over" one. When that signals reaches the code, we are,
* besides printing the signals' strings, sending a @b message back to
* the theme. We generate random values of color components and send
* them as an #EDJE_MESSAGE_INT_SET message type:
* @dontinclude signals-messages.edc
* @skip custom signal
* @until }
* @dontinclude edje-signals-messages.c
* @skip mouse over signals
* @until }
*
* In our theme we'll be changing the @c "cc" color class' values with
* those integer values of the message, so that moving the mouse over
* the right rectangle will change the left one's colors:
* @dontinclude signals-messages.edc
* @skip public message
* @until }
* @until }
*
* Now we're also sending messages from the Edje object,
* besides signals. We do so when one clicks with the left button
* over the left rectangle. With that, we change the text part's
* text, cycling between 3 pre-set strings declared in the EDC. With
* each new text string attribution, we send a string message to our
* code, with the current string as argument:
* @dontinclude signals-messages.edc
* @skip program
* @until }
* @until }
* @skip change text
* @until }
* @until }
* @dontinclude signals-messages.edc
* @skip set_text_string
* @until }
*
* To get the message in code, we have to register a message handler, as
* follows:
* @dontinclude edje-signals-messages.c
* @skip message_handler_set
* @until message_handler_set
* @dontinclude edje-signals-messages.c
* @skip print out
* @until }
*
* To interact with the last missing feature -- emitting signals
* from code -- there's a command line interface to exercise
* it. A help string can be asked for with the 'h' key:
* @dontinclude edje-signals-messages.c
* @skip commands
* @until ;
*
* The @c 't' command will send either @c "part_right,show" or @c
* "part_right,hide" signals to the Edje object (those being the
* emission part of the signal), which was set to react on them as the
* names indicate. We'll set the right rectangle's visibility on/off,
* respectively, for those two signals:
* @dontinclude signals-messages.edc
* @skip hide right rectangle
* @until }
* @until }
* @dontinclude edje-signals-messages.c
* @skip keyname, "t"
* @until }
*
* The example's window should look like this picture:
*
* @image html edje-signals-messages-example.png
* @image rtf edje-signals-messages-example.png
* @image latex edje-signals-messages-example.eps width=\textwidth
*
* The full example follows, along with its EDC file.
*
* @include signals-messages.edc
* @include edje-signals-messages.c
* @example edje-signals-messages.c
*/
/**
* @page tutorial_edje_color_class Edje Color Class example
* @dontinclude edje-color-class.c
*
* This example shows how to manipulate and change Color classes. In this example
* we will create two surfaces to show what happens when you change the color
* class at the proccess and object level.
*
* It's a very simple example, there are two surfaces created from the same EDC,
* but just in one of them we will set a specific color class, althoug both will be
* affected by color class set at the process level as you will see.
*
* It's important you know that all colors has the format R G B A. Just to be easier
* to understand this example, we will create a small set of colors that will be used
* along of the example. This piece of code is shown below:
* @skip static color colors_init_data
* @until return EINA_FALSE
* @until }
*
* Focusing on the relevant parts of the code we go right to the part where we set
* the new color class. For that we will use the functions edje_color_class_set (
* which will affect all edjes) and edje_object_color_class_set (which affects just
* the specific object).
* @skip edje_color_class_set
* @until Text shadow
* @until Text shadow
* @note
* - argv[1] is the name of a color class used in the EDC.
* - The second and third colors only apply to text part.
* - The color class set for the object overrides the color previously set.
*
* After we have set the color class we will check the color classes, for that
* we created a function which prints all color classes and tries to get theirs
* values and print too.
* @dontinclude edje-color-class.c
* @skip _color_classes_print(void)
* @until free
* @until }
* @until }
*
* There are two other things that are worth mentioning, we added two callbacks for the
* objects, one for mouse down (that we use to delete the color class) and another
* for the signal emmited when a color class is deleted.
* @skip evas_object_event
* @until NULL
* @skip edje_object_si
* @until process
*
* And then we delete the color class:
* @dontinclude edje-color-class.c
* @skip _on_mouse_down
* @until }
*
* Our example will look like this, if you run with the parameters "green_class gray pink yellow":
*
* @image html edje-color-class-example.png
* @image rtf edje-color-class-example.png
* @image latex edje-color-class-example.eps width=\textwidth
* @n
* @image html edje-color-class-example2.png
* @image rtf edje-color-class-example2.png
* @image latex edje-color-class-example2.eps width=\textwidth
*
* The full source code follows:
* @include edje-color-class.c
* @example edje-color-class.c
*
* The theme used in this example is:
* @include color-class.edc
*
*
* To compile use this command:
* @verbatim
* gcc -o edje-color-class edje-color-class.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\"
* -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc color-class.edc
* @endverbatim
* @example edje-color-class.c
*/
/**
* @page tutorial_edje_animations Edje Animations example
*
* In this example we will figure out how to manipulate the animations on
* an Edje object. After reading this document you will be able to manipulate
* the frametime, freeze, pause and stop, all animations on an Edje object.
*
* To play with this example you will use the keyboard. Below are listed the
* keys and what each does.
*
* - '+' Increase the frametime;
* - '-' Decrease the frametime;
* - '=' Prints the actual frametime and says if the animations is playing;
* - 'f' Freezes the animations in the Edje object;
* - 'F' Freezes the animations in all objects in the running program;
* - 't' Thaws the animations in the Edje object;
* - 'T' Thaws the animations in all objects in the running program;
* - 's' Pauses the animations;
* - 'p' Plays the animations previously stopped;
* - 'a' Starts the animation in the Edje object;
* - 'A' Stops the animations in the Edje object;
*
* Now that we've explained how to use our example, we will see how it is made.
* Let's start by looking at the piece of code responsible to the actions commented
* above.
* @dontinclude edje-animations.c
* @skip _on_key_down_cb
* @until Stopping
* @until }
* @until }
* @note The actions for the keys 'f' and 'F' will have the same effect in
* our example, just because there is only one object in the running
* program, The same happens with the keys 't' and 'T'.
*
* As you may have seen these set of functions are pretty easy to handle. The other
* important part of this example is the EDC file. The animations used in the
* code were created there
* @dontinclude animations.edc
* @skip program
* @until after: "animation,state1"
* @until }
* @skip program
* @until }
* @skip program
* @until }
* @until }
*
* The example's window should look like this picture:
*
* @image html edje-animations.png
* @image rtf edje-animations.png
* @image latex edje-animations.eps width=\textwidth
* @n
* @image html edje-animations2.png
* @image rtf edje-animations2.png
* @image latex edje-animations2.eps width=\textwidth
*
* The full example follows.
*
* @include edje-animations.c
* @include animations.edc
*
* To compile use this command:
* @verbatim
* gcc -o edje-animations edje-animations.c -DPACKAGE_BIN_DIR=\"/Where/enlightenment/is/installed/bin\"
* -DPACKAGE_LIB_DIR=\"/Where/enlightenment/is/installed/lib\"
* -DPACKAGE_DATA_DIR=\"/Where/enlightenment/is/installed/share\"
* `pkg-config --cflags --libs evas ecore ecore-evas edje`
*
* edje_cc animations.edc
* @endverbatim
*/
/**
* @page tutorial_edje_multisense Multisense example
* @dontinclude edje-multisense.c
*
* This is a simple example in which a rect is created and sound and tone
* are played on mouse down event.
*
* Focusing on the creation of sample and tone. It should be noted that
* creation of sample sound is from any supported (sndfile lib) audio file,
* tone from of specific audible frequency range are controlled by the theme:
*
* The full source code follows:
* @include edje-multisense.c
* @include sound.edc
*/