Wayland support in Enlightenment 0.19.0
Caution: Support for running Enlightenment in a Wayland-Only
configuration is considered Highly Experimental !! Use at your own
risk !! We are not responsible if it nukes your files, burns up your cpu,
kills your cat, sells your house, divorces you, or otherwise messes
Anything up !
Use at your own risk !! You have been warned !!
Aside from the normal requirements that Enlightenment needs, there are
a few things to note in order to get Enlightenment to build without
Firstly, you MUST have EFL built with the following options:
This Readme does not address the dependencies needed to enable Wayland
in EFL. If you require any information for that, please see:
If you would like support for EGL in Wayland, then also build EFL with:
The above options can be enabled for EFL without any adverse effects to
If you wish to test out the Highly Experimental standalone
Wayland-Only (no X11) compositor, then read below about how to compile
support for a wayland-only Enlightenment.
Next, you will need to adjust the options that you pass to
Enlightenment during the compile phase.
Please note, we recommend installing This version of Enlightenment into it's
own separate prefix so that you can still safely fallback to the X11 version.
This can be done by passing:
Now, on to the magic bits ;)
In order for Enlightenment to be compiled without X11, using Wayland
only, you will need to pass a few more options to the configure stage
If you wish to test the experimental Wayland-Only compositor, then
also pass to configure:
Since this is all still a work-in-progress, there are a few
Enlightenment modules that have not been "fixed" to work without X11
yet. Those will need to be disabled if you enabled the wayland-only
--disable-everything (don't worry, this is just the everything module)
At this stage, you should have EFL properly built, and Enlightenment
properly built. Let's move on to running it...
Hopefully at this stage you have successfully built EFL and
Enlightenment in preparation for a Wayland-only setup. Congratulations
!! Now, let's get it running...
The following steps assume you are currently at a Virtual Terminal
without anything else running (ie: no other window managers, X11, etc).
In order for Enlightenment to function without X11, we need to setup
the environment. In your current tty, do:
export ELM_ACCEL=opengl (or 'none' for SHM engine)
This will make sure that Enlightenment renders using DRM, and any
Elementary applications use a Wayland engine.
At this point, you should just be able 'cd' to the Enlightenment
prefix where you installed, and issue:
Please Note: It is suggested that you create a separate configuration
profile with only a Minimum of modules loaded. Due to the experimental
(and ongoing) status of Wayland-Only support in Enlightenment, Many
modules May Not Work. Very few have actually been tested yet !!
If you have a separate configuration profile (as suggested) that you
would like to use, you can tell Enlightenment to use that when you
./enlightenment_start -profile <my_profile>
Please Note: There is currently NO support for running X11
applications with this !! So basically, your web browsers won't work,
don't expect to be able to run Firefox, Thunderbird, or practically
Any Other X11 application yet. About the only things "known" to work
so far are EFL/Elementary applications.
Yes, there are Lots of them !!
Yes, I am already aware of 99.9% of them.
Yes, you can start reporting them ... if you do create tickets for
any bugs, please note in your ticket that you are using the e_comp_wl
When we feel that the work is reaching a "finalizing" stage, we will
put out a request for actual testers and bug reports !