When the scroller is resized, the signals("elm,action,scroll", "elm,edge,top" so on) shouldn't be sent,
because it's not a scroll-action. So in this case, the content_pos_set should be called without the signals.
The eina_file_stat_ls() function should be used instead of
eina_file_direct_ls() in _elm_config_profiles_list() - since it checks
for file types.
Patch by "Paulo C. A. Cavalcanti Jr" <paulo.cavalcanti@intel.com>
SVN revision: 83979
Orientation Mode is used for widgets to change it's styles or to send signals
whenever it's window degree is changed. If the orientation mode is enabled
and the widget has different looks and styles for the window degree(0, 90,
180, 270), it will apply a style that is readied for the current degree,
otherwise, it will send signals to it's own edje to change it's any states if
the style doesn't be readied.
SVN revision: 83880
Subject: Re: [e-users] 3 small corrections in elc_player
Hi,
1. remove __UNUSED__ for parameter that is used.
2. emit a "elm,player,play" signal as is done in _pause to keep the
state of pause/play buttons in sync.
3. Correct double_to_string which misses out subtracting hours to get
seconds.
SVN revision: 83855
Hi all,
All tween modes are added and you can set the interp.
ELM_TRANSIT_TWEEN_MODE_ACCELERATE_FACTOR
ELM_TRANSIT_TWEEN_MODE_DECELERATE_FACTOR
ELM_TRANSIT_TWEEN_MODE_SINUSOIDAL_FACTOR
ELM_TRANSIT_TWEEN_MODE_DIVISOR_INTERP
ELM_TRANSIT_TWEEN_MODE_BOUNCE
ELM_TRANSIT_TWEEN_MODE_SPRING
EAPI void elm_transit_tween_mode_factor_set(Elm_Transit *transit, double v1, double v2);
EAPI Elm_Transit_Interp *elm_transit_tween_mode_factor_get(const Elm_Transit *transit);
Thanks,
Joey
Singed-Off-By: ChanWook Jeong<jchanwook@gmail.com>
SVN revision: 83344
Hello everyone,
There are two issues with ctxpopup:
- Memory leak: Elm_Ctxpopup_Item is used but not deleted.
- Incorrect callback function: returned object and event_info are list object and item
(should be ctxpopup object and item).
I would like to send a patch to fix above issues.
I also provide the patch for backporting.
Please review them.
Best Regards,
Thiep
Signed-Off-By: Theip Ha<thiep.ha@samsung.com>
SVN revision: 82968
Before the patch, when window of device which has elementary rotates,
the ctxpopup doesn't emit the "dismissed" signal to application.
For this reason, if an application developer wants to make an event using "dismissed" signal when device rotates,
he/she cannot do anything.
But after add evas_object_smart_callback in the function "_on_parent_resize",
this problem is resolved.
That means, whether a device is rotated or not, when ctxpopup disappears, "dismissed" signal is emitted.
So I want you to check this patch.
Thank you.
Signed-Off-By: Bora Hwang<bora1.hwang@samsung.com>
SVN revision: 82918
Subject: [E-devel] [PATCH] elm_index: removed unnecessary lines
I removed some unnecessary lines from elm_index.c
1. in _index_box_auto_fill
_index_box_clear(line 178) does nothing:
if _index_box_clear is called, it means sd->level_active[level] is
false (line 116).
if sd->level_active[level] is false, _index_box_clear returns
immediately (line 60).
2. in _on_mouse_down
3. in _on_mouse_in_access
4. in _autohide_disabled_set
Signal emit is enough.
Filling the box and displaying the box are separated jobs.
I think it's logically consistent to fill the box only when
1) elm_index_level_go is called
2) theme is changed
5. in _level_go
Always clear the box before fill the box.
SVN revision: 82864
On Tue, Jan 15, 2013 at 6:02 PM, SHILPA ONKAR SINGH <shilpa.singh@samsung.com> wrote:
Hi All,
Please find attached bug fix for elm_check - toggle style.
This patch prevents "changed" signal being sent twice in case of
toggle style when check is clicked.
This also fixes few indentation issues in the style.
Change description:
elm_check: Bug fix "changed" signal being sent twice in case of toggle style when check is clicked.
Signed-Off by: Rajeev Ranjan(rajeev.r@samsung.com)
Signed-Off by: Shilpa Singh(shilpa.singh@samsung.com)
Thanks & Regards
Shilpa Singh
SVN revision: 82845
On Sun, Jan 6, 2013 at 2:23 PM, 조재현 <jae_hyun_cho@naver.com> wrote:
Dear all,
Hello. This is Jaehyun Cho.
Now, naviframe emits state signals (e.g. show or hide) for customized text part (i.e. neither "elm.text.title" nor "elm.text.subtitle") which is going to be appended to the item's text_list.
However, if the customized text parts change the text label when the text parts are in the item's text_list, naviframe does not emit state signals for them.
To resolve this issue, I added additional case in _item_text_set_hook to handle the text part which is in the item's text_list. (elementary/src/lib/elc_naviframe.c)
Please review this.
Thank you,
Jaehyun Cho.
SVN revision: 82300
now it supports slides the texts if the label area is smaller than the text width length.
deprecated - elm_label_slide_set()/get()
added - elm_label_slide_mode_set()/get()
SVN revision: 82169
On Sun, Dec 9, 2012 at 11:11 AM, thiep ha <thiep.ha@samsung.com> wrote:
Dear All,
In elementary list, the separator is not correctly set.
I would like to send a patch to correct the list with separator.
I also add an example named "List Separator" to test it.
Please review this patch.
Best Regards,
Thiep Ha
SVN revision: 82040
Dear all,
Hello. This is Jaehyun Cho.
The current version of _item_text_set_hook sends the part signal name to edje_object_part_text_set. (elementary/src/lib/elc_naviframe.c)
To resolve this issue, I sent different arguments to edje_object_part_text_set for each case.
Please review this patch.
Thank you,
Jaehyun Cho.
Signed-Off-By: JaeHyun Cho <jae_hyun_cho@naver.com>
SVN revision: 82030
For now, it supports only one system tray icon per application.
Each instance of ELM_OBJ_SYSTRAY_CLASS is a handler for
the same system tray item. But the API is ready to support
multiple system tray items per application.
Also, since this is a new feature, it only provides an EObject API. So,
if the old style API is still required, please do it.
Patch by: Murilo Belluzzo <murilo.belluzzo@profusion.mobi>
SVN revision: 81747
Subject: Re: Re: Re: [E-devel] [RFC] Virtual desktop window profile
I've attached 4th patch. May the 4th be with you.
ecore patch has been merged with efl and all files are based on r80123.
Thanks & Regards,
Gwanglim
------- Original Message -------
Sender : Daniel Juyung Seo<seojuyung2@gmail.com>
Date : 2012-12-04 01:55 (GMT+09:00)
Title : Re: Re: [E-devel] [RFC] Virtual desktop window profile
It looks ok to me.
Sorry but can you re-generate the patch according to the recent ecore
merge to efl single tree?
Daniel Juyung Seo (SeoZ)
On Thu, Nov 29, 2012 at 12:29 AM, Gwanglim Lee <gl77.lee@samsung.com>
wrote:
Dear Raster and Daniel Juyung Seo,
I've attached 3rd patches and test_config according to your reviews.
These are based on r79782.
[elementary & ecore]
1. "profile,set" -> "profile,changed" - done
2. spaces after EINA_LIST_FOREACH - done
3. variable type - keep
4. author - done
5. removing deprecated marking in patch - done
6. add elm_win_available_profiles_get to test_config for the debugging
purpose - done
7. check whether a given profile is present in an available profiles.
otherwise window profile will be one of the item
in available profiles. - newly added thing to the elm_win
8. merge with EO - done. :(
Any comments would be appreciated.
SVN revision: 80215
v1 is now deprecated (EINA_DEPRECATED) but still there, should still
work and not break any existing app.
v2 is now there as well, all software is being ported to use it
now. Just Enlightenment itself will still ship with v1 and as soon as
we release it will go v2, we have the patches here.
SVN revision: 80110
Subject: [E-devel] [PATCH][ELEMENTARY][BUG Fix] Current Reordering
item is not resizing on genlist resize (e.g On roation)
Please review the attached patch created to fix the current reordering
item
resizing issue.
[ISSUE] Current genlist reordering item is not resizing on genlist
resize
(e.g. On rotation).
Change Description:
In _calc_job call back, the width of reordering item is corrected.
SVN revision: 77992
Subject: [E-devel] [patch][elementary] conformant - use layout focus
next, direction
um.. there would be a reason to not use focus next and direction stuff..
please let me know why the conform does not use those..
if there is no reason, please keep the patch. thanks.
SVN revision: 77947
Subject: [E-devel] [patch][elementary] diskselector - bug fix
diskselector has two bugs.
1. on round enable mode
elm_diskselector_item_append(); does not call elm_box_pack_*() for
over_items and under_items which are added when the display item is
bigger
than 3.
because over_items and under_items is not added, the diskselector shows
just 4 items + half item(NOT 5 items), in case of display item number
is 5
- elm_diskselector_display_item_num(obj, 5); -.
this bug could be found only if u use as following sequence.
a. elm_diskselector_round_enabled_set(obj, EINA_TRUE);
b. elm_diskselector_item_append();
2. on the round disable mode + bigger than 3 display item
even though display item is bigger than 3 on the round disable
mode, only
two blank items are added - left_blank, right_blank.
because of this, the first item could not be selected. means.. the first
item cannot be located in the middle of diskselector.
if u scroll the diskselector to the left-most, then the second item is
selected as below.
[blank] [ 1st ] [ 2nd ] [ 3rd ] [ 4th ]
so if the display item is bigger than 3, more blank items would be
necessary.
include lines to resolve above 1st bug, the patch would resolve
this issue
also.
SVN revision: 77740
Subject: [E-devel] [Patch] multibuttonentry - data corruption issue of
the box list
here is a problem in the data corruption of the box list in
_box_layout_cb() of the multibuttonentry.
EINA_LIST_FOREACH is used to move and resize the objects.
but if box unpack/pack is called in the EINA_LIST_FOREACH loop,
the data of the box list will be corrupted.
This problem can not be solved immediately due to the structural
problems of
the MBE.
So the attached patch, a workaround, avoids calling unpack/pack in the
EINA_LIST_FOREACH loop.
I am in the process of refactoring MBE but in the mean time,
this patch will resolve the above issue.
SVN revision: 77192
Subject: [E-devel] [patch][elementary] diskselector - checking middle
item
the diskselector object x-coordinate would not be 0.
but the _scroll_animate_stop_cb() calculates selected item with assumption
that the diskselector object x-coordinate is 0.
so different item which is not in middle of diskselector is selected.
SVN revision: 77182
Subject: [E-devel] [patch][elementary] bubble - text set does not
display info text part
current bubble dose not display 'info' which is TEXT part.
i have learned that the following commit would be reverted.
http://trac.enlightenment.org/e/changeset/71516/trunk/elementary/src/lib/elm_bubble.c
or remove 'else' from 'else if' on current
_elm_bubble_smart_text_set();.
anyhow i made a diff and attached. please find it and give feedback.
thanks.
SVN revision: 76669
Subject: [E-devel] [patch] Add APIs for floating mode
I added APIs for supporting the floating mode -
elm_win_floating_mode_set, elm_win_floating_mode_get.
The floating mode will be used on mobile environment. For example, if
the video-player window set the floating mode, then e (enlightenment
window manager) changes it's geometry and handles it like a popup.
Please check these APIs and give an advice for me.
SVN revision: 76667
Parsing the parts and programs of the specified group and generating
the header/source. Usage:
elementary_codegen --prefix myapp_myobj input.edj a_group source.c header.h
SVN revision: 76614
Subject: [E-devel] [Patch] [Elementary] Support for circular effect in
elm_diskselector, in case scroller's bounce effect is disabled.
Can someone please review the attached patch created by Sumanth.
[Issue Details] :
elm_diskselector_round_enable_set() API is not working, if
elm_scroller's bounce effect is disabled.
[Root cause] :
For diskselector circular effect, the boundary checking is done based
on scroller's geometry.
If bouncing effect is disabled in elm_scroller, its geometry can lie
between 0 on left and CHILD_SIZE on right but it can never go beyond
that point.
Unless the scroller's geometry goes beyond its child (here, elm_box)
size, diskselector cann't trigger the circular effect.
[Change Description] :
For diskselector items circular effect, the boundary checking is
performed at the left/right edges of its child, elm_box.
Once the scroller reaches to the left/right edge of box or goes beyond
that point, circular effect will be triggered.
SVN revision: 76606
Subject: [E-devel] [patch][elementary] diskselector - text align issue
by default diskselector item has space for icon even though the item does
not have icon.
so in some cases, the text is not located in the center of item and
diskselector.
the attachment would resolve this issue. please look into it and give
feedback. thanks.
SVN revision: 76507
Subject: [E-devel] [Patch] [Elementary] ctxpopup - correct position
and size of ctxpopup
With ctxpopup, if it has many items and user uses -1 as parameter in
set direction priority function,
the ctxpopup position and size are calculated incorrectly.
Ex:
elm_ctxpopup_direction_priority_set(ctxpopup,
ELM_CTXPOPUP_DIRECTION_DOWN, ELM_CTXPOPUP_DIRECTION_UP, -1, -1);
SVN revision: 76505
Subject: [E-devel] [patch][elementary] popup - smart theme
popup have used notify its internal widget. but popup does not take care
the notify theme in its smart_theme()
the attachment just add a line to set style to the notify and test code
also. please review and give feedback. thanks.
SVN revision: 75987
Subject: [E-devel] [patch] change plug-in loading behavior in elm_map
Elm_map have 3 modules (Tile, Route, Name) for plug-in loading
When elm_map is added, each 3 modules search plug-ins
(elm_map does use eina_module, not elm_module because elm_map loads
several modules. )
Previously, Each modules in elm_map search modules separately.
So module init /shutdown function in each plug-in is called 3times.
This can cause problems.
I fixed that module init is called at one time and module never be
unloaded (in process life-cycle).
SVN revision: 75974
and "focus-out"."
This reverts commit 1bb12050b9785d47e102b4a3633210316d408f0d.
Conflicts:
ChangeLog
NEWS
Cedric, this is just wrong. The *on_focus* smart function of the base
widget is now the central place to handle focus in/out events.
I'll fix the spinner in sequence.
SVN revision: 74853
NOTE: This improve calendar performance quite a lot, but a better improvement
would be to populate the object when we really need it. I don't know how to
do that in current Elementary source code. Reason for another expected massive
improvement is that every time you set a property on an Elm_Calendar trigger
a populate and that one is costly (Around 6 populates call per Elm_Calendar in
our code example, meaning doing it could give us a 6 times boost...).
SVN revision: 74553
In real world it's very likely you're flipping to something, back or
front, not randomly flipping around based on one button.
I'd say we should deprecate the elm_flip_go().
SVN revision: 74360
Subject: [E-devel] [Patch][elm_map] Add elm_map_overlays_get &
elm_map_overlay_visible_get
I want to add 2 new APIs (elm_map_overlays_get & elm_map_overlay_visible_get).
There are no way to get the group overlays because group overlay,
something like virtual overlay, is created and deleted dynamically.
So elm_map_overlays_get returns total overlay's list and user can get
any type of overlays including group overlays.
Overlays which is grouped can not be visible. Because overlay grouping
is performed by elm_map, user do not know whether overlays are visible
or not. So elm_map_overlay_visible_get is added for this reason.
SVN revision: 71354
* Fileselector test: add a check to enable/disable buttons
Updated Changelog and NEW, also add myself as authors...
btw: the EIO code in the Fileselector is crazy-complex, about 200
lines of code just to have the list of files ina dir... :/
SVN revision: 70965
NOTE: This is not very robust yet. But that's not related to this patch.
You can see the issue when switching between two different theme in
elementary_config. At some point elementary_test start to loose information.
SVN revision: 70895
using elm_widget_focus_direction_go function, focus will be moved from
the current focused object to the near object in one direction.
Direction can be set by degree(for easy usability). Degree changes
clockwise, i.e. 0 means UP, 90 means RIGHT, 180 means DOWN, and 270
means LEFT. You can select any direction by changing this degree.
SVN revision: 70681