You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

719 lines
20 KiB

2011-01-29 Carsten Haitzler (The Rasterman)
1.0.0 release
2011-01-30 Tom Hacohen (TAsn)
* Added "UNDER" cursor mode.
* Added auto-alignment to text parts, just set text.alignment to -1 to
activate it. It's only relevant to TEXT parts, textblock objects
already have that by default.
2011-02-01 Tom Hacohen (TAsn)
* Added Mirroring support to edje objects.
2011-02-08 Cedric BAIL
* Fix invalid memory access by edje alias code.
2011-02-10 Cedric BAIL
* Fix use of recursive alias.
2011-02-21 WooHyun Jung
* Fix missing cursor changed signale on backspace
2011-02-21 Mike Blumenkrantz
* Add built-in cpp (epp) to provide consistent output on all archs/OSes
2011-02-10 Cedric BAIL
* Fix propagation of recursive events on existing part.
2011-02-24 Cedric BAIL
* fix signal comming from box/table item to include their
index or name correctly.
2011-02-25 Jihoon Kim
* Add edje_object_part_text_cursor_pos_{set,get} API
2011-02-27 Tom Hacohen (TAsn)
* Added size_range property to TEXT parts in edje files.
This lets you limit the size of the font that will be used.
Especially useful when using fit.
2011-03-10 WooHyun Jung
* Fix: Emit clicked signal on entry if still in - missing.
2011-03-10 Cedric BAIL
* Correctly propagate recursive event with existing and non existing
part.
2011-03-11 Cedric BAIL
* Add PROXY part.
2011-03-19 Carsten Haitzler (The Rasterman)
* Change edje_decc to only use edje_cc as the compiler for security
and correctness reasons.
2011-03-23 Brett Nash (nash)
* Move some of edje over to use smart clipper in evas. This _should_
be transparent to users.
2011-03-30 Carsten Haitzler (The Rasterman)
* text.align (only the vertical part) now works for textblock.
2011-04-1 Carsten Haitzler (The Rasterman)
* Add Feature: Support explicit shadow direction with extra effect
param (optional). Default as before.
2011-04-28 Tom Hacohen (TAsn)
* size_min_restricted_calc: Fixed textblock handling.
2011-05-15 Tom Hacohen (TAsn)
* Entry - New API: added edje_object_part_text_append which appends
text to the end of the textblock part. This lets us do cool thing
like population of textblock using idler.
2011-05-16 Carsten Haitzler (The Rasterman)
* Add new interpolation modes for programs to make animation
much easier. Added: ACCEL_FAC, DECEL_FAC, SIN_FAC, DIVIS,
BOUNCE, SPRING (also made short name versions of the long ones
possible too).
2011-05-19 Tom Hacohen (TAsn)
* Entry: Don't emit "cursor,changed" when setting the text, because
the cursor really didn't change, it's more like a new cursor.
Also, when setting position, don't do anything if position is as it
was.
2011-05-27 Carsten Haitzler (The Rasterman)
* Improve performance on create/delete of edje objects by using
evas freeze and thaw calls. May help in certain pathological
situations.
2011-05-27 Cedric Bail
* Improve performance by avoiding walking eina_list for nothing
when deleting member_class.
2011-06-09 Cedric Bail
* Fix external usage in sub group to have the proper parents.
2011-06-11 Tom Hacohen (TAsn)
* Fix an issue with ellipsis not working properly with small
text parts.
2011-06-21 Cedric Bail
* Make it possible to define part.description.max only on one axis.
2011-07-24 Mike Blumenkrantz
* Add signals entry,paste,request,1 (PRIMARY) and entry,paste,request,3 (CLIPBOARD)
to differentiate between paste types
* Add entry,selection,all,request for signalling ctrl+a in an entry
* Add entry,selection,none,request for signalling ctrl+shift+a in an entry
* Fix entry,paste,request* to be emitted after cursor,changed (fixes middle mouse paste location)
2011-05-27 Carsten Haitzler (The Rasterman)
* Fix edje_shutdown() being called before all evas objects created
by edje (edje objects) are gone. Delay internal core shutdown
until all references gone.
2011-08-03 Tom Hacohen (TAsn)
* Entry: Added changed,user signal. This signal indicates the entry
has changed because of user interaction, i.e not by code.
2012-08-04 Flavio Ceolin
* Added edje_codegen - tool that genereates code to working with
edje files.
2011-08-22 Cedric Bail
* Add collection.group.limits {
vertical: "name" value;
horizontal: "name" value;
}.
2011-08-25 Jihoon Kim
* Add entry input panel layout setting api's
2011-08-10 Tom Hacohen (TAsn)
* Signals: Added the ability to pass extra data with edje signals.
Added edje_object_signal_callback_extra_data_get to support that.
2011-08-29 Jaehwan Kim
* Add group's inheritance.
* Add insert_before, insert_after to can change the part's order.
2011-10-02 Boris Faure (billiob)
* Fix edje_cc to accept -1 in description.max
2011-10-03 Tom Hacohen (TAsn)
* Entry: Added change information to entry,changed,user
2011-11-03 Jaehwan Kim
* Transition: Add the "CURRENT" option which causes the edje object move
from its current position.
2011-10-04 Govindaraju SM, Prince Kumar Dubey
* Add Edje multisense that allows playback of samples and
vibrator control and ultimately beginsd to pave the way for
more complex audio etc. support.
2011-11-06 David Seikel (onefang)
* Lua: Added color_class and text_class functions.
Still need to write a function for setting the classes of an object.
This works for things in OTHER groups using those classes though.
* Add image, text, textblock (commented out), and edje objects.
Very basic support.
* Add functions for set/get text font, size, and text.
* Add function for set/get image image.
Still needs to limit to only imagess in the current edje file.
* Add functions for set/get image fill and filled.
* Add function for set/get edje file.
Still needs to limit to only groups in the current edje file.
* Add full support for evas line object.
* Add full support for evas polygon object.
* Beefed up the example lua script to show most of the above.
Including some handling of size changes.
* White space fixes, one of the editors I use cleans those up automatically. shrugs
2011-11-06 David Seikel (onefang)
* Lua: Added half of the evas map API.
2011-11-07 David Seikel (onefang)
* Lua: Added the other half of the evas map API.
2011-11-19 Carsten Haitzler (The Rasterman)
* Fix message and signal propagation to be consistent in all situations
as well as simpler.
2011-12-02 Carsten Haitzler (The Rasterman)
1.1.0 release
2011-12-12 Mike Blumenkrantz (discomfitor/zmike)
* Fix potential crash from buffer overflow on copying map data.
2011-12-15 Tom Hacohen (TAsn)
* Entry: Added support for various new key bindings:
Ctrl+Arrows, Ctrl+Del and Ctrl+Backspace.
* Entry: Added cursor,changed,manual signal.
This signal indicates the cursor has been manually changed, i.e by
either mouse click or arrows.
2011-12-15 Cedric Bail
* Fix detections of limits by edje_cc parser.
2011-12-16 Cedric Bail
* Fix wrong call to free() in edje_load.
* Reduce parts walk to the strict minimum.
2011-12-19 Cedric Bail
* Check existence of group at compile time also.
2012-01-02 Carsten Haitzler (The Rasterman)
* Fix prototype for edje_object_part_text_cursor_content_get()
as it returned a strduped string and not an internal one, so
this just formalizes its existing behavior correctly.
2012-01-03 Tom Hacohen (TAsn)
* Entry: Fixed undo/redo with IMF.
2012-01-04 Carsten Haitzler (The Rasterman)
* Add HEX, TERMINAL and PASSWORD layouts to edje
* Add "recalc" smart callback for object size changes
2012-01-05 Cedric Bail
* Reduce call to stat during edje_object_file_set.
2012-01-06 Cedric Bail
* Unswallow object that are about to be swallowed if necessary.
* Add EDJE_ASPECT_PREFER_SOURCE.
2012-01-07 David Seikel (onefang)
* Lua: Calling non exstent functions no longer crashes scripts.
This is so that future scripts will still work with old libraries,
and lets us add the "host can provide Lua API" feature soon.
2012-01-09 David Seikel (onefang)
* Lua: Added edje.version().
2012-01-14 Carsten Haitzler (The Rasterman)
* Added minmul propery for edje to multiply minimum size during min size calc
2012-01-20 Carsten Haitzler (The Rasterman)
* Fix the ability to change the edje file source of an edje object
inside a callback - it worked but you couldn't swallow/set text etc.
2012-01-03 Tom Hacohen (TAsn)
* Entry: Added edje_object_part_text_style_user_set/get that'll use
the new corresponding textblock functions.
2012-01-23 Cedric Bail
* Fix overridding group in edje_cc by fixing with the right index.
2012-01-24 Cedric Bail
* Filter should only be valid once all program affecting there part are done.
2012-01-25 Cedric Bail
* Only store the image used by active group.
2012-01-26 Cedric Bail
* Add min: SOURCE, max: SOURCE.
2012-02-03 Jihoon Kim
* Entry: Fix to work edje_object_part_text_input_panel_enabled_set/get well
even though ecore_imf doesn't exist or immodule isn't used.
2012-02-07 WooHyun Jung
* Added edje_object_markup_filter_callback_{add,del,del_full}.
These let you append(delete) markup filter functions for filtering
inserted text.
2012-02-08 Cedric Bail
* Fix bug when using EDJE_CALC_CACHE and using relative to x and y
on separate part.
* Fix bug with filter preventing any action to be triggered.
2012-02-10 Cedric Bail
* Prevent propagation of signal, when there is a matching target with edje GROUP.
2012-02-13 Jihoon Kim
* add edje_object_part_text_input_panel_show/hide.
These APIs can be used in input panel manual control mode.
* add edje_object_part_text_imf_context_reset that will use
for reseting the input method context.
2012-02-14 Jihoon Kim
* add edje_object_part_text_prediction_allow_set/get.
These APIs can be used to set whether prediction feature is allowed or not.
2012-02-14 Cedric Bail
* add a way to disable signal broadcasting introduced in edje 1.1.
2012-02-15 Jihoon Kim
* add edje_object_part_text_input_panel_language_set/get
edje_object_part_text_input_panel_imdata_set/get
edje_object_part_text_input_panel_return_key_type_set/get
edje_object_part_text_input_panel_return_key_disabled_set/get
2012-02-20 WooHyun Jung
* Change API names from edje_object_markup_filter_callback_{add,del,del_full}.
to edje_object_text_markup_filter_callback_{add,del,del_full}.
2012-02-24 Jihoon Kim
* add edje_object_part_text_imf_context_get for getting Ecore_IMF_Context handle in edje text object
2012-02-29 Tom Hacohen (TAsn)
* Entry: Added edje_object_part_text_user_insert.
This function inserts text as if the user has inserted it.
This means it actually registers as a change and etc.
2012-03-06 Mikael Sans (XHeLL)
* Entry: Added double click and triple click.
Double click selects a word.
Triple click selects a line.
2012-03-07 Tom Hacohen (TAsn)
* Entry: Replaced edje_object_part_text_style_user_set/get
with edje_object_part_text_style_user_set/get to correspond to
textblock's recent changes.
2012-03-07 Cedric Bail
* Correctly count and propagate preload signal with GROUP.
* Fix rotation with fixed point.
2012-03-11 Cedric Bail
* Propagate scale factor to GROUP's part.
2012-03-12 Cedric Bail
* Make it possible for edje to update size hint automatically.
* Add min: SOURCE to GROUP's part.
2012-03-30 Jihoon Kim
* Fix number doesn't insert even though NUM LOCK is locked.
2012-04-16 Carsten Haitzler (The Rasterman)
* Add EDJE_VERSION_12 define so edc files can #ifdef compile
right.
2012-04-20 Carsten Haitzler (The Rasterman)
* To work through a bug in Elementary, add
edje_object_part_text_escaped_set() that converts escapes to
plain UTF8 if the part is TEXT.
2012-04-26 Carsten Haitzler (The Rasterman)
1.2.0 release
2012-04-30 Jérôme Pinot
* Add missing files in the tarballs.
2012-05-02 Cedric Bail
* Doing less allocation and reuse Evas_Map does help.
2012-05-08 Cedric Bail
* Add edje_watch tools to automatically rebuild edc.
2012-05-09 Cedric Bail
* Fix bug in case of nesting edje_object_signal_emit and edje_object_signal_callback_{add,del}
* Check that the file changed on disk when trying to reopen it.
* Emit ['edje,change,file', 'edje'] when the file change on disk.
* Automatically reload edje file when it change in edje_player.
2012-05-10 Cedric Bail
* Preserve user box and table items during call of edje_object_file_set.
2012-05-12 Rajeev Ranjan (Rajeev)
* Add edje_cc optimization to remove alpha channel flag from images
with absolutely no alpha in them if marked as havin alpha in the
originals
2012-05-14 Cedric Bail
* Preserve drag informations during call of edje_object_file_set.
2012-05-15 Carsten Haitzler (The Rasterman)
* Optimize edje_cc to be multi-threaded and compress in parallel
* Remove O(n2) algorithms for O(1) in the parser in edje_cc
* Add options for the new compression modes in Eet. (fastcomp
and fastdecomp - LZ4 and LZ4HC).
* Overall sped up edje_cc by 4x faster (if you use fastcomp)
and about 4.5x faster with old zlib compression.
2012-05-16 Cedric Bail
* Fix table and text when fixed point is turned on.
* Clamp image tween to never underflow also.
2012-05-20 Cedric Bail
* Use Eina_File instead of fopen when possible in edje_cc.
From: SHILPA ONKAR SINGH <shilpa.singh@samsung.com> Subject: [E-devel] [Edje]: Bug Fix: Edje draggable jumps when external events is used. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. demo edc pasted below to reproduce the issue. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. demo edc pasted below to reproduce the issue. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. demo edc pasted below to reproduce the issue. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. SVN revision: 71277
11 years ago
2012-05-21 Shilpa Onkar Singh
From: SHILPA ONKAR SINGH <shilpa.singh@samsung.com> Subject: [E-devel] [Edje]: Bug Fix: Edje draggable jumps when external events is used. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. demo edc pasted below to reproduce the issue. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. demo edc pasted below to reproduce the issue. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. demo edc pasted below to reproduce the issue. Please find attached bug fix patch for edje draggable jump issue when external event area is used. Bug: When an external event area is used for edje draggable and when after mouse move if immediate mouse down is done then the draggable jumps back to its original position. Analysis: In _edje_mouse_down_signal_cb When an external event area is set i.e., when rp->events_to is set. tmp.x value is set to 0, need_reset is set to 1 and also _edje_recalc_do is called including emitting "drag" signal. this code is unnecessary/buggy and instead it causes the jump. 1. In mouse down only drag->down.x and drag->down.y needs to be set which is being set below and tmp value need not be reset to 0 as tmp value is calculated in mouse move based on drag->down.x and drag->down.y values. 2. need_reset is already set in mouse up hence need not be set in mouse down again. 3. edje_recalc_do is the function which actually causes the movement of draggable based on tmp value hence need not be called in mouse down. because of the above code race condition happens and as tmp value is being set to 0 and need reset is also enabled the draggable jumps back to where it started. 4. "drag": is sent even before "drag,start" [ should not /need not be sent in mouse down ] All the above code is added only when external event area is set and the above code is not even related to whether external event is set or not. Solution: When an external event area is set directly equating rp = rp->events_to and sending mouse,down would be enough, as down.x and down.y is set below including sending drag,start. Recalc_do should be called only in mouse move as its responsible for movement including setting tmp value. need_reset is already set in mouse up. drag should not be sent from mouse down. Change Description: Bug Fix: Edje Draggable jumps when mouse down is done immediately after mouse move when an external event area is used. SVN revision: 71277
11 years ago
* Fix patch for edje draggable jump issue when external event
area is used for the dragable.
2012-06-04 Cedric Bail
* Add SPACER part to reduce the load on the canvas (lighter and faster theme).
2012-06-04 Prince Kumar Dubey
* Fix decompile of sound samples to use sound source file, not name
* Fix decompile of sound samples not double-free
* Fix alsa configure option to be alsa, not flac.
2012-06-06 Leandro Pereira
* Made state index optional (defaulting to 0.0).
2012-06-06 Jihoon Kim
* edje_entry: display preedit string even though there is no attribute
2012-06-20 Kim Shinwoo
* Add edje_object_access_part_list_get and acess flags in edc file.
2012-06-21 Carsten Haitzler (The Rasterman)
* Improve edje_cc slightly to use prefix for full path to
embryo_cc. this still like before requires embryo and edje to share
the same install prefix for edje_cc to work.
2012-06-12 Michael Bouchaud (yoz)
* The aliases are now inherited from the targeted group
* Aliases can be usable with edje programs, if the part is in the
group
2012-06-24 Cedric Bail
* Emit signal for flagged part when their size get to zero.
2012-07-03 Tom Hacohen (TAsn)
* Entry: Update anchors from user_insert as well.
2012-07-12 Tom Hacohen (TAsn)
* Textblock: Fixed issue with updating only the font size using text
classes.
* Textblock: Fixed updating textblock text_class with
edje_text_class_set.
* Text classes: Fixed edje_text_class_set to behave like
edje_object_text_class_set (and as expected) wrt NULL fonts.
2012-07-12 Cedric Bail
* Warn at compile time about forgotten image definition.
* Stop compilation when clipping to a non RECT part.
2012-07-14 Cedric Bail
* Fix Edje_Multisense shutdown.
2012-07-24 Carsten Haitzler (The Rasterman)
* Fix edje entry to extend selection to char pos/word or line
when holding shift + mouse click.
2012-07-29 Cedric Bail
* Reduce potential reentrant issue when using edje_object_signal_emit.
2012-08-06 Cedric Bail
* Call edje_object_message_signal_process also on GROUP part Edje object.
2012-08-07 Cedric Bail
* Fix memory leak when Edje file have alias defined.
2012-08-09 Cedric Bail
* Improve speed of color_class lookup by using an Eina_Hash.
2012-08-14 Hermet
* Fix the uv mapping correctly in case of image swallowed.
2012-08-21 Guilherme Silveira
* Fix password timeout with fixed point.
2012-08-24 Cedric Bail
* Properly destroy color_class and text_class on an Edje_Object.
2012-08-27 Tom Hacohen (TAsn)
* Textblock: Fixed issue with textblock fit not sizing correctly. This
fix is not perfect.
2012-08-29 Cedric Bail
* Don't leak memory on edje block error during signal emit.
2012-08-30 Carsten Haitzler (The Rasterman)
1.7.0 release
2012-08-30 Cedric Bail
* Check the number of parameter for image in edc.
2012-09-04 Cedric Bail
* Report type of file when listing file used by an edc.
2012-09-04 Jihoon Kim (jihoon)
* Add EDJE_INPUT_PANEL_RETURN_KEY_TYPE_SIGNIN.
2012-09-04 Aharon Hillel
* Added nested parts support.
This lets us do nested parts, e.g parts "{ part { part { } } }"
2012-09-05 ChunEon Park (Hermet)
* if user change image size of the image object which is swallowed and
it's map enabled by the edje, then edje needs to update it's uv mapping
info.
2012-09-11 Cedric Bail
* O(1) lookup used when searching Part_Lookup in edje_cc.
* O(1) lookup when generating alias of group.
* O(1) access time for parameters in edje_cc_handler.
* Recycle and use less memory during load time.
2012-09-11 Carsten Haitzler (The Rasterman)
* Improve memory footprint by cutting core edje real part
struct down by less than half its size and making some parts allocated
extra only if the type needs it.
2012-09-12 Cedric Bail
* Small improvement in memory footprint by using an array instead of a list for
some callback list.
2012-09-17 Cedric Bail
* Don't generate an annotate file if edje_cc failed.
2012-09-17 Michael Bouchaud (yoz)
* fix group inheritance on a group who have a script with global
varable.
* fix group inheritance on a group who have some programs uses script
2012-09-20 David Seikel (onefang)
* Lua: Lua 5.2 support added.
2012-09-21 Flavio Ceolin
* edje_codegen: added support for externals
2012-09-27 Michael Bouchaud (yoz)
* fix scale_set in sub group
2012-09-27 Flavio Ceolin
* edje_codegen: adding support for draggable
2012-10-10
* edje_entry: Add more tags(preedit_sub1~4) for a variety of preediting states.
2012-10-21 Daniel Zaoui
* Edje: change Edje to use Eo.
This change adds Eo support to Edje while keeping the old API intact.
For more information, go to Eo.
2012-10-26 Michael Bouchaud (yoz)
* fix edje_object_scale_set with edje containing boxes and/or tables
2012-10-31 Carsten Haitzler (The Rasterman)
* Fix edje_cc to use max compression, not default compression.
2012-10-31 ChunEon Park (Hermet)
* Fix to update the text classes when text classes are changed.
2012-11-02 ChunEon Park (Hermet)
* Fix to not update map uv for proxy
2012-11-15 Daniel Willmann
* Add embryo function get_image_id
2012-11-23 Bruno Dilly
* Support message sending on edje player.
2012-11-23 Eduardo Lima (Etrunko)
* Add embryo function get_program_id
2012-12-05 Robert David
* Fix Solaris 11 build.
2012-12-05 Tae-Hwan Kim (Bluezery)
* Fix inheriting gorups with programs that have after programs where
after programs are duplicated in the list.
2012-12-12 Cedric Bail
* Use Evas to compute Ellipsis.
2012-12-13 Jihoon Kim
* Return plain text in retrive surrounding text callback of entry
2012-12-13 Bruno Dilly
* Support physics.
2012-12-18 Jihoon Kim
* ecore_imf cursor infomation update is not necessary in focus-out event
2012-12-18 WooHyun Jung
* Before cursor is moved by mouse_down, imf_context_reset should be called with current cursor position.