You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

579 lines
15 KiB

#include "e.h"
#include <libgen.h>
E_API int E_EVENT_EXEHIST_UPDATE = 0;
/* local subsystem functions */
typedef struct _E_Exehist E_Exehist;
typedef struct _E_Exehist_Item E_Exehist_Item;
struct _E_Exehist
{
Eina_List *history;
Eina_List *mimes;
int startup_id;
};
struct _E_Exehist_Item
{
const char *exe;
const char *normalized_exe;
const char *launch_method;
double exetime;
unsigned int count;
};
static void _e_exehist_unload_queue(void);
static void _e_exehist_load(void);
static void _e_exehist_clear(void);
static void _e_exehist_unload(void);
static void _e_exehist_limit(void);
static const char *_e_exehist_normalize_exe(const char *exe);
static void _e_exehist_cb_unload(void *data);
static int _e_exehist_sort_exe_cb(const void *d1, const void *d2);
static int _e_exehist_sort_pop_cb(const void *d1, const void *d2);
/* local subsystem globals */
static E_Config_DD *_e_exehist_config_edd = NULL;
static E_Config_DD *_e_exehist_config_item_edd = NULL;
static E_Exehist *_e_exehist = NULL;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
static E_Powersave_Deferred_Action *_e_exehist_unload_defer = NULL;
static int _e_exehist_changes = 0;
static void
_upgrade_defaults_to_mimeapps(void)
{
char buf[PATH_MAX], buf2[PATH_MAX];
snprintf(buf, sizeof(buf), "%s/mimeapps.list",
efreet_config_home_get());
if (ecore_file_exists(buf)) return;
ecore_file_mkpath(efreet_config_home_get());
snprintf(buf2, sizeof(buf2), "%s/applications/defaults.list",
efreet_data_home_get());
ecore_file_cp(buf2, buf);
}
/* externally accessible functions */
EINTERN int
e_exehist_init(void)
{
_e_exehist_config_item_edd = E_CONFIG_DD_NEW("E_Exehist_Item", E_Exehist_Item);
#undef T
#undef D
#define T E_Exehist_Item
#define D _e_exehist_config_item_edd
E_CONFIG_VAL(D, T, exe, STR);
E_CONFIG_VAL(D, T, normalized_exe, STR);
E_CONFIG_VAL(D, T, launch_method, STR);
E_CONFIG_VAL(D, T, exetime, DOUBLE);
_e_exehist_config_edd = E_CONFIG_DD_NEW("E_Exehist", E_Exehist);
#undef T
#undef D
#define T E_Exehist
#define D _e_exehist_config_edd
E_CONFIG_LIST(D, T, history, _e_exehist_config_item_edd);
E_CONFIG_LIST(D, T, mimes, _e_exehist_config_item_edd);
E_CONFIG_VAL(D, T, startup_id, INT);
E_EVENT_EXEHIST_UPDATE = ecore_event_type_new();
_upgrade_defaults_to_mimeapps();
return 1;
}
EINTERN int
e_exehist_shutdown(void)
{
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
if (_e_exehist_unload_defer)
{
e_powersave_deferred_action_del(_e_exehist_unload_defer);
_e_exehist_unload_defer = NULL;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
}
_e_exehist_cb_unload(NULL);
E_CONFIG_DD_FREE(_e_exehist_config_item_edd);
E_CONFIG_DD_FREE(_e_exehist_config_edd);
return 1;
}
E_API void
e_exehist_startup_id_set(int id)
{
_e_exehist_load();
if (!_e_exehist) return;
_e_exehist->startup_id = id;
_e_exehist_changes++;
_e_exehist_unload_queue();
}
E_API int
e_exehist_startup_id_get(void)
{
int id;
_e_exehist_load();
if (!_e_exehist) return 0;
id = _e_exehist->startup_id;
_e_exehist_unload_queue();
return id;
}
E_API void
e_exehist_add(const char *launch_method, const char *exe)
{
E_Exehist_Item *ei;
_e_exehist_load();
if (!_e_exehist) return;
ei = E_NEW(E_Exehist_Item, 1);
if (!ei)
{
_e_exehist_unload_queue();
return;
}
ei->launch_method = eina_stringshare_add(launch_method);
ei->exe = eina_stringshare_add(exe);
ei->normalized_exe = _e_exehist_normalize_exe(exe);
ei->exetime = ecore_time_unix_get();
_e_exehist->history = eina_list_append(_e_exehist->history, ei);
_e_exehist_limit();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_changes++;
ecore_event_add(E_EVENT_EXEHIST_UPDATE, NULL, NULL, NULL);
_e_exehist_unload_queue();
}
E_API void
e_exehist_del(const char *exe)
{
E_Exehist_Item *ei;
Eina_List *l;
Eina_Bool ok = EINA_FALSE;
_e_exehist_load();
if (!_e_exehist) return;
EINA_LIST_FOREACH(_e_exehist->history, l, ei)
{
if ((ei->exe) && (!strcmp(exe, ei->exe)))
{
eina_stringshare_del(ei->exe);
eina_stringshare_del(ei->normalized_exe);
eina_stringshare_del(ei->launch_method);
free(ei);
_e_exehist->history = eina_list_remove_list(_e_exehist->history,
l);
_e_exehist_changes++;
_e_exehist_unload_queue();
ok = EINA_TRUE;
}
}
if (ok)
ecore_event_add(E_EVENT_EXEHIST_UPDATE, NULL, NULL, NULL);
}
E_API void
e_exehist_clear(void)
{
_e_exehist_load();
if (!_e_exehist) return;
_e_exehist_clear();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_changes++;
ecore_event_add(E_EVENT_EXEHIST_UPDATE, NULL, NULL, NULL);
_e_exehist_unload_queue();
}
E_API int
e_exehist_popularity_get(const char *exe)
{
Eina_List *l;
E_Exehist_Item *ei;
const char *normal;
int count = 0;
_e_exehist_load();
if (!_e_exehist) return 0;
normal = _e_exehist_normalize_exe(exe);
if (!normal) return 0;
EINA_LIST_FOREACH(_e_exehist->history, l, ei)
{
if ((ei->normalized_exe) && (!strcmp(normal, ei->normalized_exe)))
count++;
}
eina_stringshare_del(normal);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_unload_queue();
return count;
}
E_API double
e_exehist_newest_run_get(const char *exe)
{
Eina_List *l;
E_Exehist_Item *ei;
const char *normal;
_e_exehist_load();
if (!_e_exehist) return 0.0;
normal = _e_exehist_normalize_exe(exe);
if (!normal) return 0.0;
EINA_LIST_REVERSE_FOREACH(_e_exehist->history, l, ei)
{
if ((ei->normalized_exe) && (!strcmp(normal, ei->normalized_exe)))
{
eina_stringshare_del(normal);
_e_exehist_unload_queue();
return ei->exetime;
}
}
eina_stringshare_del(normal);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_unload_queue();
return 0.0;
}
E_API Eina_List *
e_exehist_list_get(void)
{
return e_exehist_sorted_list_get(E_EXEHIST_SORT_BY_DATE, 0);
}
E_API Eina_List *
e_exehist_sorted_list_get(E_Exehist_Sort sort_type, int max)
{
Eina_List *list = NULL, *pop = NULL, *l = NULL, *m;
Eina_Iterator *iter;
E_Exehist_Item *ei;
int count = 1;
E_Exehist_Item *prev = NULL;
if (!max) max = 20;
_e_exehist_load();
switch (sort_type)
{
case E_EXEHIST_SORT_BY_EXE:
case E_EXEHIST_SORT_BY_POPULARITY:
l = eina_list_clone(_e_exehist->history);
l = eina_list_sort(l, 0, _e_exehist_sort_exe_cb);
iter = eina_list_iterator_new(l);
break;
default:
iter = eina_list_iterator_reversed_new(_e_exehist->history);
break;
}
EINA_ITERATOR_FOREACH(iter, ei)
{
int bad = 0;
if (!(ei->normalized_exe)) continue;
if (sort_type == E_EXEHIST_SORT_BY_POPULARITY)
{
if (!prev || (strcmp(prev->normalized_exe, ei->normalized_exe)))
{
prev = ei;
pop = eina_list_append(pop, ei);
}
prev->count++;
}
else
{
const char *exe;
EINA_LIST_FOREACH(list, m, exe)
{
if (!exe) continue;
if (!strcmp(exe, ei->exe))
{
bad = 1;
break;
}
}
if (!(bad))
{
list = eina_list_append(list, ei->exe);
count++;
}
}
if (count > max) break;
}
if (sort_type == E_EXEHIST_SORT_BY_POPULARITY)
{
count = 1;
pop = eina_list_sort(pop, 0, _e_exehist_sort_pop_cb);
EINA_LIST_FOREACH(pop, l, prev)
{
list = eina_list_append(list, prev->exe);
count++;
if (count > max) break;
}
eina_list_free(pop);
}
eina_list_free(l);
eina_iterator_free(iter);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_unload_queue();
return list;
}
E_API void
e_exehist_mime_desktop_add(const char *mime, Efreet_Desktop *desktop)
{
const char *f;
E_Exehist_Item *ei;
Eina_List *l;
char buf[PATH_MAX];
Efreet_Ini *ini;
if ((!mime) || (!desktop)) return;
if (!desktop->orig_path) return;
_e_exehist_load();
if (!_e_exehist) return;
f = efreet_util_path_to_file_id(desktop->orig_path);
if (!f) return;
snprintf(buf, sizeof(buf), "%s/mimeapps.list",
efreet_config_home_get());
ini = efreet_ini_new(buf);
//fprintf(stderr, "try open %s = %p\n", buf, ini);
if (ini)
{
//fprintf(stderr, "SAVE mime %s with %s\n", mime, desktop->orig_path);
if (!efreet_ini_section_set(ini, "Default Applications"))
{
efreet_ini_section_add(ini, "Default Applications");
efreet_ini_section_set(ini, "Default Applications");
}
if (desktop->orig_path)
efreet_ini_string_set(ini, mime, ecore_file_file_get(desktop->orig_path));
efreet_ini_save(ini, buf);
efreet_ini_free(ini);
}
EINA_LIST_FOREACH(_e_exehist->mimes, l, ei)
{
if ((ei->launch_method) && (!strcmp(mime, ei->launch_method)))
{
if ((ei->exe) && (!strcmp(f, ei->exe)))
{
_e_exehist_unload_queue();
return;
}
if (ei->exe) eina_stringshare_del(ei->exe);
if (ei->launch_method) eina_stringshare_del(ei->launch_method);
free(ei);
_e_exehist->mimes = eina_list_remove_list(_e_exehist->mimes, l);
_e_exehist_changes++;
break;
}
}
ei = E_NEW(E_Exehist_Item, 1);
if (!ei)
{
_e_exehist_unload_queue();
return;
}
ei->launch_method = eina_stringshare_add(mime);
ei->exe = eina_stringshare_add(f);
ei->exetime = ecore_time_unix_get();
_e_exehist->mimes = eina_list_append(_e_exehist->mimes, ei);
_e_exehist_limit();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_changes++;
_e_exehist_unload_queue();
}
E_API Efreet_Desktop *
e_exehist_mime_desktop_get(const char *mime)
{
Efreet_Desktop *desktop;
E_Exehist_Item *ei;
Eina_List *l;
//fprintf(stderr, "e_exehist_mime_desktop_get(%s)\n", mime);
if (!mime) return NULL;
_e_exehist_load();
//fprintf(stderr, "x\n");
if (!_e_exehist) return NULL;
EINA_LIST_FOREACH(_e_exehist->mimes, l, ei)
{
//fprintf(stderr, "look for %s == %s\n", mime, ei->launch_method);
if ((ei->launch_method) && (!strcmp(mime, ei->launch_method)))
{
desktop = NULL;
if (ei->exe) desktop = efreet_util_desktop_file_id_find(ei->exe);
//fprintf(stderr, " desk = %p\n", desktop);
if (desktop)
{
_e_exehist_unload_queue();
return desktop;
}
}
}
_e_exehist_unload_queue();
return NULL;
}
/* local subsystem functions */
static void
_e_exehist_unload_queue(void)
{
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
if (_e_exehist_unload_defer)
e_powersave_deferred_action_del(_e_exehist_unload_defer);
_e_exehist_unload_defer =
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
e_powersave_deferred_action_add(_e_exehist_cb_unload, NULL);
}
static void
_e_exehist_load(void)
{
if (!_e_exehist)
_e_exehist = e_config_domain_load("exehist", _e_exehist_config_edd);
if (!_e_exehist)
_e_exehist = E_NEW(E_Exehist, 1);
}
static void
_e_exehist_clear(void)
{
if (_e_exehist)
{
E_Exehist_Item *ei;
EINA_LIST_FREE(_e_exehist->history, ei)
{
eina_stringshare_del(ei->exe);
eina_stringshare_del(ei->normalized_exe);
eina_stringshare_del(ei->launch_method);
free(ei);
}
EINA_LIST_FREE(_e_exehist->mimes, ei)
{
eina_stringshare_del(ei->exe);
eina_stringshare_del(ei->launch_method);
free(ei);
}
}
}
static void
_e_exehist_unload(void)
{
_e_exehist_clear();
E_FREE(_e_exehist);
}
static void
_e_exehist_limit(void)
{
/* go from first item in hist on and either delete all items before a
* specific timestamp, or if the list count > limit then delete items
*
* for now - limit to 500
*/
if (_e_exehist)
{
while (eina_list_count(_e_exehist->history) > 500)
{
E_Exehist_Item *ei;
ei = eina_list_data_get(_e_exehist->history);
eina_stringshare_del(ei->exe);
eina_stringshare_del(ei->normalized_exe);
eina_stringshare_del(ei->launch_method);
free(ei);
_e_exehist->history = eina_list_remove_list(_e_exehist->history, _e_exehist->history);
}
while (eina_list_count(_e_exehist->mimes) > 500)
{
E_Exehist_Item *ei;
ei = eina_list_data_get(_e_exehist->mimes);
eina_stringshare_del(ei->exe);
eina_stringshare_del(ei->launch_method);
free(ei);
_e_exehist->mimes = eina_list_remove_list(_e_exehist->mimes, _e_exehist->mimes);
}
}
}
static const char *
_e_exehist_normalize_exe(const char *exe)
{
char *base, *buf, *cp, *space = NULL;
const char *ret;
Eina_Bool flag = EINA_FALSE;
buf = strdup(exe);
base = basename(buf);
if ((base[0] == '.') && (base[1] == '\0'))
{
free(buf);
return NULL;
}
cp = base;
while (*cp)
{
if (isspace(*cp))
{
if (!space) space = cp;
if (flag) flag = EINA_FALSE;
}
else if (!flag)
{
/* usually a variable in the desktop exe field */
if (space && *cp == '%')
flag = EINA_TRUE;
else
{
char lower = tolower(*cp);
space = NULL;
if (lower != *cp) *cp = lower;
}
}
cp++;
}
if (space) *space = '\0';
ret = eina_stringshare_add(base);
free(buf);
return ret;
}
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
static void
_e_exehist_cb_unload(void *data EINA_UNUSED)
{
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
if (_e_exehist_changes)
{
e_config_domain_save("exehist", _e_exehist_config_edd, _e_exehist);
_e_exehist_changes = 0;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
}
_e_exehist_unload();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
15 years ago
_e_exehist_unload_defer = NULL;
}
static int
_e_exehist_sort_exe_cb(const void *d1, const void *d2)
{
const E_Exehist_Item *ei1, *ei2;
ei1 = d1;
ei2 = d2;
if ((!ei1) || (!ei1->normalized_exe)) return 1;
if ((!ei2) || (!ei2->normalized_exe)) return -1;
return strcmp(ei1->normalized_exe, ei2->normalized_exe);
}
static int
_e_exehist_sort_pop_cb(const void *d1, const void *d2)
{
const E_Exehist_Item *ei1, *ei2;
if (!(ei1 = d1)) return 1;
if (!(ei2 = d2)) return -1;
return ei2->count - ei1->count;
}