enlightenment/src/bin/e_powersave.c

392 lines
10 KiB
C
Raw Permalink Normal View History

e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
#include "e.h"
#include <sys/select.h>
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
struct _E_Powersave_Deferred_Action
{
2012-08-12 23:51:24 -07:00
void (*func)(void *data);
const void *data;
2017-11-08 06:22:24 -08:00
unsigned char delete_me E_BITFIELD;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
};
struct _E_Powersave_Sleeper
{
Ecore_Pipe *pipe;
int fd;
Eina_Bool go E_BITFIELD;
Eina_Bool free_requested E_BITFIELD;
};
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* local subsystem functions */
static void _e_powersave_sleeper_cb_dummy(void *data EINA_UNUSED, void *buffer EINA_UNUSED, unsigned int bytes EINA_UNUSED);
static Eina_Bool _e_powersave_cb_deferred_timer(void *data);
2012-08-12 23:51:24 -07:00
static void _e_powersave_mode_eval(void);
static void _e_powersave_event_update_free(void *data EINA_UNUSED, void *event);
static void _e_powersave_event_change_send(E_Powersave_Mode mode);
static void _e_powersave_sleepers_wake(void);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* local subsystem globals */
E_API int E_EVENT_POWERSAVE_UPDATE = 0;
E_API int E_EVENT_POWERSAVE_CONFIG_UPDATE = 0;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
static int walking_deferred_actions = 0;
static Eina_List *deferred_actions = NULL;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
static Ecore_Timer *deferred_timer = NULL;
static E_Powersave_Mode powersave_mode = E_POWERSAVE_MODE_LOW;
static E_Powersave_Mode powersave_mode_force = E_POWERSAVE_MODE_NONE;
static E_Powersave_Mode powersave_mode_screen = E_POWERSAVE_MODE_NONE;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
static double defer_time = 5.0;
static Eina_Bool powersave_force = EINA_FALSE;
static Eina_List *powersave_sleepers = NULL;
static Eina_Bool powersave_deferred_suspend = EINA_FALSE;
static Eina_Bool powersave_deferred_hibernate = EINA_FALSE;
static Eina_Bool powersave_screen = EINA_FALSE;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* externally accessible functions */
EINTERN int
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_powersave_init(void)
{
_e_powersave_mode_eval();
E_EVENT_POWERSAVE_UPDATE = ecore_event_type_new();
E_EVENT_POWERSAVE_CONFIG_UPDATE = ecore_event_type_new();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
return 1;
}
EINTERN int
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_powersave_shutdown(void)
{
return 1;
}
E_API E_Powersave_Deferred_Action *
2012-08-12 23:51:24 -07:00
e_powersave_deferred_action_add(void (*func)(void *data), const void *data)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
E_Powersave_Deferred_Action *pa;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
pa = calloc(1, sizeof(E_Powersave_Deferred_Action));
if (!pa) return NULL;
if (deferred_timer) ecore_timer_del(deferred_timer);
deferred_timer = ecore_timer_loop_add(defer_time,
_e_powersave_cb_deferred_timer,
NULL);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
pa->func = func;
pa->data = data;
deferred_actions = eina_list_append(deferred_actions, pa);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
return pa;
}
E_API void
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_powersave_deferred_action_del(E_Powersave_Deferred_Action *pa)
{
if (walking_deferred_actions)
{
2012-08-12 23:51:24 -07:00
pa->delete_me = 1;
return;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
else
{
2012-08-12 23:51:24 -07:00
deferred_actions = eina_list_remove(deferred_actions, pa);
free(pa);
if (!deferred_actions)
{
if (deferred_timer)
{
ecore_timer_del(deferred_timer);
deferred_timer = NULL;
}
}
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
}
E_API void
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_powersave_mode_set(E_Powersave_Mode mode)
{
if (mode < e_config->powersave.min) mode = e_config->powersave.min;
else if (mode > e_config->powersave.max) mode = e_config->powersave.max;
if (powersave_mode == mode) return;
printf("PWSAVE %i/%i\n", (int)mode, (int)E_POWERSAVE_MODE_FREEZE);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
powersave_mode = mode;
if (powersave_force) return;
_e_powersave_event_change_send(powersave_mode);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
_e_powersave_mode_eval();
}
E_API E_Powersave_Mode
e_powersave_mode_get(void)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
if (powersave_force) return powersave_mode_force;
// if (powersave_screen) return powersave_mode_screen;
return powersave_mode;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
E_API void
e_powersave_mode_force(E_Powersave_Mode mode)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
if (mode == powersave_mode_force) return;
printf("PWSAVE FORCE %i/%i\n", (int)mode, (int)E_POWERSAVE_MODE_FREEZE);
powersave_force = EINA_TRUE;
powersave_mode_force = mode;
_e_powersave_event_change_send(powersave_mode_force);
_e_powersave_mode_eval();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
E_API void
e_powersave_mode_unforce(void)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
if (!powersave_force) return;
printf("PWSAVE UNFORCE\n");
powersave_force = EINA_FALSE;
if (powersave_mode_force != powersave_mode)
{
_e_powersave_event_change_send(powersave_mode);
_e_powersave_mode_eval();
}
powersave_mode_force = E_POWERSAVE_MODE_NONE;
}
E_API void
e_powersave_mode_screen_set(E_Powersave_Mode mode)
{
if (mode == powersave_mode_screen) return;
printf("PWSAVE SCREEN SET %i/%i\n", (int)mode, (int)E_POWERSAVE_MODE_FREEZE);
powersave_screen = EINA_TRUE;
powersave_mode_screen = mode;
_e_powersave_event_change_send(powersave_mode_screen);
_e_powersave_mode_eval();
}
E_API void
e_powersave_mode_screen_unset(void)
{
if (!powersave_screen) return;
printf("PWSAVE SCREEN UNSET\n");
powersave_screen = EINA_FALSE;
powersave_mode_screen = E_POWERSAVE_MODE_NONE;
_e_powersave_event_change_send(powersave_mode_screen);
_e_powersave_mode_eval();
}
2020-11-26 01:16:40 -08:00
E_API E_Powersave_Mode
e_powersave_mode_screen_get(void)
{
if (!powersave_screen) return E_POWERSAVE_MODE_NONE;
return powersave_mode_screen;
}
E_API E_Powersave_Sleeper *
e_powersave_sleeper_new(void)
{
E_Powersave_Sleeper *sleeper;
sleeper = E_NEW(E_Powersave_Sleeper, 1);
sleeper->pipe = ecore_pipe_add(_e_powersave_sleeper_cb_dummy, NULL);
if (!sleeper->pipe)
{
eina_freeq_ptr_add(eina_freeq_main_get(), sleeper, free, sizeof(*sleeper));
return NULL;
}
sleeper->fd = ecore_pipe_read_fd(sleeper->pipe);
ecore_pipe_freeze(sleeper->pipe);
powersave_sleepers = eina_list_append(powersave_sleepers, sleeper);
return (E_Powersave_Sleeper *)sleeper;
}
E_API void
e_powersave_sleeper_free(E_Powersave_Sleeper *sleeper)
{
if (!sleeper) return;
ecore_pipe_del(sleeper->pipe);
eina_freeq_ptr_add(eina_freeq_main_get(), sleeper, free, sizeof(*sleeper));
powersave_sleepers = eina_list_remove(powersave_sleepers, sleeper);
}
E_API void
e_powersave_sleeper_sleep(E_Powersave_Sleeper *sleeper, int poll_interval, Eina_Bool allow_save)
{
double timf;
unsigned int tim;
fd_set rfds, wfds, exfds;
struct timeval tv;
int ret;
char buf[1] = { 1 };
if (!sleeper) return;
if (allow_save)
{
E_Powersave_Mode pm = e_powersave_mode_get();
if (powersave_screen) pm = powersave_mode_screen;
if (pm == E_POWERSAVE_MODE_FREEZE)
timf = 3600.0;
else if (pm == E_POWERSAVE_MODE_EXTREME)
timf = (double)poll_interval / 2.0;
else if (pm == E_POWERSAVE_MODE_HIGH)
timf = (double)poll_interval / 4.0;
else
timf = (double)poll_interval / 8.0;
}
else
timf = (double)poll_interval / 8.0;
FD_ZERO(&rfds);
FD_ZERO(&wfds);
FD_ZERO(&exfds);
FD_SET(sleeper->fd, &rfds);
tim = ((timf - fmod(ecore_time_get(), timf)) * 1000000.0);
tv.tv_sec = tim / 1000000;
tv.tv_usec = tim % 1000000;
for (;;)
{
ret = select(sleeper->fd + 1, &rfds, &wfds, &exfds, &tv);
if ((ret == 1) && (FD_ISSET(sleeper->fd, &rfds)))
{
if (read(sleeper->fd, buf, 1) < 0)
fprintf(stderr, "%s: ERROR READING FROM FD\n", __func__);
if (buf[0] == 1) // was woken up by mainloop to do another poll
return;
}
else if (ret == 0)
return;
}
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
E_API void
e_powersave_defer_suspend(void)
{
powersave_deferred_suspend = EINA_TRUE;
}
E_API void
e_powersave_defer_hibernate(void)
{
powersave_deferred_hibernate = EINA_TRUE;
}
E_API void
e_powersave_defer_cancel(void)
{
powersave_deferred_suspend = EINA_FALSE;
powersave_deferred_hibernate = EINA_FALSE;
}
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* local subsystem functions */
static void
_e_powersave_sleepers_wake(void)
{
E_Powersave_Sleeper *sleeper;
Eina_List *l;
char buf[1] = { 1 };
EINA_LIST_FOREACH(powersave_sleepers, l, sleeper)
{
if (write(ecore_pipe_write_fd(sleeper->pipe), buf, 1) < 0)
fprintf(stderr, "%s: ERROR WRITING TO FD\n", __func__);
ecore_pipe_write(sleeper->pipe, buf, 1);
}
}
static void
_e_powersave_sleeper_cb_dummy(void *data EINA_UNUSED, void *buffer EINA_UNUSED, unsigned int bytes EINA_UNUSED)
{
}
static Eina_Bool
_e_powersave_cb_deferred_timer(void *data EINA_UNUSED)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
E_Powersave_Deferred_Action *pa;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
walking_deferred_actions++;
EINA_LIST_FREE(deferred_actions, pa)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
2012-08-12 23:51:24 -07:00
if (!pa->delete_me) pa->func((void *)pa->data);
free(pa);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
walking_deferred_actions--;
if (!deferred_actions) deferred_timer = NULL;
return ECORE_CALLBACK_CANCEL;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
static void
_e_powersave_mode_eval(void)
{
double t = 0.0;
E_Powersave_Mode mode = e_powersave_mode_get();
if (powersave_screen) mode = powersave_mode_screen;
switch (mode)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
case E_POWERSAVE_MODE_NONE:
2012-08-12 23:51:24 -07:00
t = e_config->powersave.none; /* time to defer "power expensive" activities */
break;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
case E_POWERSAVE_MODE_LOW:
2012-08-12 23:51:24 -07:00
t = e_config->powersave.low;
break;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
case E_POWERSAVE_MODE_MEDIUM:
2012-08-12 23:51:24 -07:00
t = e_config->powersave.medium;
break;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
case E_POWERSAVE_MODE_HIGH:
2012-08-12 23:51:24 -07:00
t = e_config->powersave.high;
break;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
case E_POWERSAVE_MODE_EXTREME:
2012-08-12 23:51:24 -07:00
t = e_config->powersave.extreme;
break;
case E_POWERSAVE_MODE_FREEZE:
t = 3600;
break;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
default:
2012-08-12 23:51:24 -07:00
return;
break;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
if (!EINA_DBL_EQ(t, defer_time))
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
2012-08-12 23:51:24 -07:00
if (deferred_timer) ecore_timer_del(deferred_timer);
deferred_timer = ecore_timer_loop_add(defer_time,
_e_powersave_cb_deferred_timer,
NULL);
2012-08-12 23:51:24 -07:00
defer_time = t;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
}
static void
_e_powersave_event_update_free(void *data EINA_UNUSED, void *event)
{
E_Powersave_Mode mode;
if (powersave_force) mode = powersave_mode_force;
else mode = powersave_mode;
free(event);
printf("PWSAVE: update free...\n");
if (mode > E_POWERSAVE_MODE_LOW)
{
printf("PWSAVE: low pwr hib=%i sus=%i\n", powersave_deferred_hibernate, powersave_deferred_suspend);
if (powersave_deferred_hibernate)
e_sys_action_do(E_SYS_HIBERNATE, NULL);
else if (powersave_deferred_suspend)
e_sys_action_do(E_SYS_SUSPEND, NULL);
}
powersave_deferred_hibernate = EINA_FALSE;
powersave_deferred_suspend = EINA_FALSE;
}
2012-08-12 23:51:24 -07:00
static void
_e_powersave_event_change_send(E_Powersave_Mode mode)
{
E_Event_Powersave_Update *ev;
printf("PWSAVE TO %i/%i\n", (int)mode, (int)E_POWERSAVE_MODE_FREEZE);
ev = E_NEW(E_Event_Powersave_Update, 1);
ev->mode = mode;
ecore_event_add(E_EVENT_POWERSAVE_UPDATE, ev, _e_powersave_event_update_free, NULL);
_e_powersave_sleepers_wake();
}