enlightenment/src/modules/pager/e_mod_config.c

401 lines
14 KiB
C
Raw Normal View History

#include "e.h"
#include "e_mod_main.h"
#define BUTTON_DRAG 0
#define BUTTON_NOPLACE 1
#define BUTTON_DESK 2
struct _E_Config_Dialog_Data
{
struct
{
int show, urgent_show, urgent_stick;
double speed, urgent_speed;
int height;
int act_height;
} popup;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
int drag_resist, flip_desk, show_desk_names;
struct
{
unsigned int drag, noplace, desk;
} btn;
struct
{
Ecore_X_Window bind_win;
E_Dialog *dia;
Eina_List *hdls;
int btn;
} grab;
struct
{
Evas_Object *o_btn1, *o_btn2, *o_btn3;
} gui;
};
static void *_create_data(E_Config_Dialog *cfd);
static void _fill_data(Config_Item *ci, E_Config_Dialog_Data *cfdata);
2006-01-14 08:10:57 -08:00
static void _free_data(E_Config_Dialog *cfd, E_Config_Dialog_Data *cfdata);
static Evas_Object *_basic_create(E_Config_Dialog *cfd, Evas *evas, E_Config_Dialog_Data *cfdata);
static int _basic_apply(E_Config_Dialog *cfd, E_Config_Dialog_Data *cfdata);
static Evas_Object *_adv_create(E_Config_Dialog *cfd, Evas *evas, E_Config_Dialog_Data *cfdata);
static int _adv_apply(E_Config_Dialog *cfd, E_Config_Dialog_Data *cfdata);
static void _grab_wnd_show(void *data1, void *data2);
static int _grab_cb_mouse_down(void *data, int type, void *event);
static int _grab_cb_key_down(void *data, int type, void *event);
static void _grab_wnd_hide(E_Config_Dialog_Data *cfdata);
static void _adv_update_btn_lbl(E_Config_Dialog_Data *cfdata);
void
_config_pager_module(Config_Item *ci)
{
E_Config_Dialog *cfd;
E_Config_Dialog_View *v;
E_Container *con;
char buf[4096];
v = E_NEW(E_Config_Dialog_View, 1);
if (!v) return;
snprintf(buf, sizeof(buf), "%s/e-module-pager.edj",
e_module_dir_get(pager_config->module));
v->create_cfdata = _create_data;
v->free_cfdata = _free_data;
v->basic.create_widgets = _basic_create;
v->basic.apply_cfdata = _basic_apply;
v->advanced.create_widgets = _adv_create;
v->advanced.apply_cfdata = _adv_apply;
con = e_container_current_get(e_manager_current_get());
cfd = e_config_dialog_new(con, _("Pager Settings"), "E",
"_e_mod_pager_config_dialog", buf, 0, v, ci);
pager_config->config_dialog = cfd;
}
static void *
_create_data(E_Config_Dialog *cfd)
{
2006-01-14 08:10:57 -08:00
E_Config_Dialog_Data *cfdata;
2006-01-14 08:10:57 -08:00
cfdata = E_NEW(E_Config_Dialog_Data, 1);
_fill_data(cfd->data, cfdata);
return cfdata;
}
static void
_fill_data(Config_Item *ci, E_Config_Dialog_Data *cfdata)
{
cfdata->popup.show = pager_config->popup;
cfdata->popup.speed = pager_config->popup_speed;
cfdata->popup.urgent_show = pager_config->popup_urgent;
cfdata->popup.urgent_stick = pager_config->popup_urgent_stick;
cfdata->popup.urgent_speed = pager_config->popup_urgent_speed;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
cfdata->show_desk_names = pager_config->show_desk_names;
cfdata->popup.height = pager_config->popup_height;
cfdata->popup.act_height = pager_config->popup_act_height;
cfdata->drag_resist = pager_config->drag_resist;
cfdata->btn.drag = pager_config->btn_drag;
cfdata->btn.noplace = pager_config->btn_noplace;
cfdata->btn.desk = pager_config->btn_desk;
cfdata->flip_desk = pager_config->flip_desk;
}
static void
2006-01-14 08:10:57 -08:00
_free_data(E_Config_Dialog *cfd, E_Config_Dialog_Data *cfdata)
{
pager_config->config_dialog = NULL;
E_FREE(cfdata);
}
static Evas_Object *
_basic_create(E_Config_Dialog *cfd, Evas *evas, E_Config_Dialog_Data *cfdata)
{
Evas_Object *o = NULL, *of = NULL, *ow = NULL;
2006-08-05 19:21:07 -07:00
o = e_widget_list_add(evas, 0, 0);
of = e_widget_framelist_add(evas, _("General Settings"), 0);
ow = e_widget_check_add(evas, _("Flip desktop on mouse wheel"),
&(cfdata->flip_desk));
e_widget_framelist_object_append(of, ow);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
ow = e_widget_check_add(evas, _("Show desktop names"),
&(cfdata->show_desk_names));
e_widget_framelist_object_append(of, ow);
e_widget_list_object_append(o, of, 1, 1, 0.5);
of = e_widget_framelist_add(evas, _("Popup Settings"), 0);
ow = e_widget_check_add(evas, _("Show popup on desktop change"),
&(cfdata->popup.show));
e_widget_framelist_object_append(of, ow);
ow = e_widget_check_add(evas, _("Show popup for urgent windows"),
&(cfdata->popup.urgent_show));
e_widget_framelist_object_append(of, ow);
e_widget_list_object_append(o, of, 1, 1, 0.5);
return o;
}
static int
_basic_apply(E_Config_Dialog *cfd, E_Config_Dialog_Data *cfdata)
{
pager_config->popup = cfdata->popup.show;
pager_config->flip_desk = cfdata->flip_desk;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
pager_config->show_desk_names = cfdata->show_desk_names;
pager_config->popup_urgent = cfdata->popup.urgent_show;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* FIXME: update gui with desk names */
e_config_save_queue();
return 1;
}
static Evas_Object *
_adv_create(E_Config_Dialog *cfd, Evas *evas, E_Config_Dialog_Data *cfdata)
{
Evas_Object *o = NULL, *of = NULL, *ow = NULL;
o = e_widget_list_add(evas, 0, 0);
of = e_widget_frametable_add(evas, _("General Settings"), 0);
ow = e_widget_check_add(evas, _("Flip desktop on mouse wheel"),
&(cfdata->flip_desk));
e_widget_frametable_object_append(of, ow, 0, 0, 2, 1, 1, 0, 1, 0);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
ow = e_widget_check_add(evas, _("Show desktop names"),
&(cfdata->show_desk_names));
e_widget_frametable_object_append(of, ow, 0, 1, 2, 1, 1, 0, 1, 0);
ow = e_widget_label_add(evas, _("Select and Slide button"));
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 0, 2, 1, 1, 1, 0, 1, 0);
ow = e_widget_button_add(evas, _("Click to set"), NULL,
_grab_wnd_show, (void *)BUTTON_DRAG, cfdata);
cfdata->gui.o_btn1 = ow;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 1, 2, 1, 1, 0, 0, 1, 0);
ow = e_widget_label_add(evas, _("Drag and Drop button"));
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 0, 3, 1, 1, 1, 0, 1, 0);
ow = e_widget_button_add(evas, _("Click to set"), NULL,
_grab_wnd_show, (void *)BUTTON_NOPLACE, cfdata);
cfdata->gui.o_btn2 = ow;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 1, 3, 1, 1, 0, 0, 1, 0);
ow = e_widget_label_add(evas, _("Drag whole desktop"));
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 0, 4, 1, 1, 1, 0, 1, 0);
ow = e_widget_button_add(evas, _("Click to set"), NULL,
_grab_wnd_show, (void *)BUTTON_DESK, cfdata);
cfdata->gui.o_btn3 = ow;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 1, 4, 1, 1, 0, 0, 1, 0);
_adv_update_btn_lbl(cfdata);
/* TODO find better name */
ow = e_widget_label_add(evas, _("Keyaction popup height"));
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 0, 5, 1, 1, 1, 0, 1, 0);
ow = e_widget_slider_add(evas, 1, 0, _("%.0f px"), 20.0, 200.0, 1.0, 0, NULL,
&(cfdata->popup.act_height), 100);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 1, 5, 1, 1, 1, 0, 1, 0);
ow = e_widget_label_add(evas, _("Resistance to dragging"));
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 0, 6, 1, 1, 1, 0, 1, 0);
ow = e_widget_slider_add(evas, 1, 0, _("%.0f px"), 0.0, 10.0, 1.0, 0, NULL,
&(cfdata->drag_resist), 100);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_widget_frametable_object_append(of, ow, 1, 6, 1, 1, 1, 0, 1, 0);
e_widget_list_object_append(o, of, 1, 1, 0.5);
of = e_widget_frametable_add(evas, _("Popup Settings"), 0);
ow = e_widget_check_add(evas, _("Show popup on desktop change"),
&(cfdata->popup.show));
e_widget_frametable_object_append(of, ow, 0, 0, 2, 1, 1, 0, 1, 0);
ow = e_widget_label_add(evas, _("Popup pager height"));
e_widget_frametable_object_append(of, ow, 0, 1, 1, 1, 1, 0, 1, 0);
ow = e_widget_slider_add(evas, 1, 0, _("%.0f px"), 20.0, 200.0, 1.0, 0, NULL,
&(cfdata->popup.height), 100);
e_widget_frametable_object_append(of, ow, 1, 1, 1, 1, 1, 0, 1, 0);
ow = e_widget_label_add(evas, _("Popup speed"));
e_widget_frametable_object_append(of, ow, 0, 2, 1, 1, 1, 0, 1, 0);
ow = e_widget_slider_add(evas, 1, 0, _("%1.1f seconds"), 0.1, 10.0, 0.1, 0,
&(cfdata->popup.speed), NULL, 100);
e_widget_frametable_object_append(of, ow, 1, 2, 1, 1, 1, 0, 1, 0);
e_widget_list_object_append(o, of, 1, 1, 0.5);
of = e_widget_frametable_add(evas, _("Urgent Window Settings"), 0);
ow = e_widget_check_add(evas, _("Show popup on urgent window"),
&(cfdata->popup.urgent_show));
e_widget_frametable_object_append(of, ow, 0, 0, 2, 1, 1, 0, 1, 0);
ow = e_widget_check_add(evas, _("Popup on urgent window sticks on the screen"),
&(cfdata->popup.urgent_stick));
e_widget_frametable_object_append(of, ow, 0, 1, 2, 1, 1, 0, 1, 0);
ow = e_widget_label_add(evas, _("Popup speed"));
e_widget_frametable_object_append(of, ow, 0, 2, 1, 1, 1, 0, 1, 0);
ow = e_widget_slider_add(evas, 1, 0, _("%1.1f seconds"), 0.1, 10.0, 0.1, 0,
&(cfdata->popup.urgent_speed), NULL, 100);
e_widget_frametable_object_append(of, ow, 1, 2, 1, 1, 1, 0, 1, 0);
e_widget_list_object_append(o, of, 1, 1, 0.5);
return o;
}
static int
_adv_apply(E_Config_Dialog *cfd, E_Config_Dialog_Data *cfdata)
{
pager_config->popup = cfdata->popup.show;
pager_config->popup_speed = cfdata->popup.speed;
pager_config->flip_desk = cfdata->flip_desk;
pager_config->popup_urgent = cfdata->popup.urgent_show;
pager_config->popup_urgent_stick = cfdata->popup.urgent_stick;
pager_config->popup_urgent_speed = cfdata->popup.urgent_speed;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
pager_config->show_desk_names = cfdata->show_desk_names;
pager_config->popup_height = cfdata->popup.height;
pager_config->popup_act_height = cfdata->popup.act_height;
pager_config->drag_resist = cfdata->drag_resist;
pager_config->btn_drag = cfdata->btn.drag;
pager_config->btn_noplace = cfdata->btn.noplace;
pager_config->btn_desk = cfdata->btn.desk;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* FIXME: update gui with desk names */
e_config_save_queue();
return 1;
}
static void
_grab_wnd_show(void *data1, void *data2)
{
E_Manager *man = NULL;
E_Config_Dialog_Data *cfdata = NULL;
Ecore_Event_Handler *hdl = NULL;
if (!(cfdata = data2)) return;
man = e_manager_current_get();
cfdata->grab.btn = 0;
if ((int)data1 == BUTTON_DRAG)
cfdata->grab.btn = 1;
else if ((int)data1 == BUTTON_NOPLACE)
cfdata->grab.btn = 2;
cfdata->grab.dia = e_dialog_new(e_container_current_get(man), "Pager",
"_pager_button_grab_dialog");
if (!cfdata->grab.dia) return;
e_dialog_title_set(cfdata->grab.dia, _("Pager Button Grab"));
e_dialog_icon_set(cfdata->grab.dia, "preferences-desktop-mouse", 48);
e_dialog_text_set(cfdata->grab.dia, _("Please press a mouse button<br>"
"Press <hilight>Escape</hilight> to abort.<br>"
"Or <hilight>Del</hilight> to reset the button."));
e_win_centered_set(cfdata->grab.dia->win, 1);
e_win_borderless_set(cfdata->grab.dia->win, 1);
cfdata->grab.bind_win = ecore_x_window_input_new(man->root, 0, 0,
man->w, man->h);
ecore_x_window_show(cfdata->grab.bind_win);
if (!e_grabinput_get(cfdata->grab.bind_win, 0, cfdata->grab.bind_win))
{
ecore_x_window_del(cfdata->grab.bind_win);
cfdata->grab.bind_win = 0;
e_object_del(E_OBJECT(cfdata->grab.dia));
cfdata->grab.dia = NULL;
return;
}
hdl = ecore_event_handler_add(ECORE_X_EVENT_KEY_DOWN,
_grab_cb_key_down, cfdata);
cfdata->grab.hdls = eina_list_append(cfdata->grab.hdls, hdl);
hdl = ecore_event_handler_add(ECORE_X_EVENT_MOUSE_BUTTON_DOWN,
_grab_cb_mouse_down, cfdata);
cfdata->grab.hdls = eina_list_append(cfdata->grab.hdls, hdl);
e_dialog_show(cfdata->grab.dia);
ecore_x_icccm_transient_for_set(cfdata->grab.dia->win->evas_win,
pager_config->config_dialog->dia->win->evas_win);
}
static int
_grab_cb_mouse_down(void *data, int type, void *event)
{
E_Config_Dialog_Data *cfdata = NULL;
Ecore_X_Event_Mouse_Button_Down *ev;
ev = event;
if (!(cfdata = data)) return 1;
if (ev->win != cfdata->grab.bind_win) return 1;
if(ev->button == cfdata->btn.drag)
cfdata->btn.drag = 0;
else if (ev->button == cfdata->btn.noplace)
cfdata->btn.noplace = 0;
else if (ev->button == cfdata->btn.desk)
cfdata->btn.desk = 0;
if (cfdata->grab.btn == 1)
cfdata->btn.drag = ev->button;
else if (cfdata->grab.btn == 2)
cfdata->btn.noplace = ev->button;
else
cfdata->btn.desk = ev->button;
if(ev->button == 3)
{
e_util_dialog_show(_("Attetion"),
_("You cannot use the right mouse button in the<br>"
"shelf for this as it is already taken by internal<br>"
"code for context menus. <br>"
"This button only works in the Popup"));
}
_grab_wnd_hide(cfdata);
return 1;
}
static int
_grab_cb_key_down(void *data, int type, void *event)
{
E_Config_Dialog_Data *cfdata = NULL;
Ecore_X_Event_Key_Down *ev;
ev = event;
if (!(cfdata = data)) return 1;
if (ev->win != cfdata->grab.bind_win) return 1;
if (!strcmp(ev->keyname, "Escape")) _grab_wnd_hide(cfdata);
if (!strcmp(ev->keyname, "Delete"))
{
if (cfdata->grab.btn == 1)
cfdata->btn.drag = 0;
else if (cfdata->grab.btn == 2)
cfdata->btn.noplace = 0;
else
cfdata->btn.desk = 0;
_grab_wnd_hide(cfdata);
}
return 1;
}
static void
_grab_wnd_hide(E_Config_Dialog_Data *cfdata)
{
while (cfdata->grab.hdls)
{
ecore_event_handler_del(cfdata->grab.hdls->data);
cfdata->grab.hdls = eina_list_remove_list(cfdata->grab.hdls, cfdata->grab.hdls);
}
cfdata->grab.hdls = NULL;
e_grabinput_release(cfdata->grab.bind_win, cfdata->grab.bind_win);
if (cfdata->grab.bind_win) ecore_x_window_del(cfdata->grab.bind_win);
cfdata->grab.bind_win = 0;
if (cfdata->grab.dia)
e_object_del(E_OBJECT(cfdata->grab.dia));
cfdata->grab.dia = NULL;
_adv_update_btn_lbl(cfdata);
}
static void
_adv_update_btn_lbl(E_Config_Dialog_Data *cfdata)
{
char lbl[256] = "";
snprintf(lbl, sizeof(lbl), _("Click to set"));
if (cfdata->btn.drag)
snprintf(lbl, sizeof(lbl), _("Button %i"), cfdata->btn.drag);
e_widget_button_label_set(cfdata->gui.o_btn1, lbl);
snprintf(lbl, sizeof(lbl), _("Click to set"));
if (cfdata->btn.noplace)
snprintf(lbl, sizeof(lbl), _("Button %i"), cfdata->btn.noplace);
e_widget_button_label_set(cfdata->gui.o_btn2, lbl);
snprintf(lbl, sizeof(lbl), _("Click to set"));
if (cfdata->btn.desk)
snprintf(lbl, sizeof(lbl), _("Button %i"), cfdata->btn.desk);
e_widget_button_label_set(cfdata->gui.o_btn3, lbl);
}