2019-03-08 06:55:43 -08:00
enum @beta Efl.Net.Session_State {
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
[[Provides the session connectivity state.
]]
2017-12-20 09:30:29 -08:00
offline, [[No access point is connected.]]
local, [[At least one access point has connected and the internet connection hasn't been verified.]]
online, [[At least one access point has connected and the internet connection has been verified.]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
/* keep in sync with efl_net_control_technology.eo, comment what doesn't make sense */
2019-03-08 06:55:43 -08:00
enum @beta Efl.Net.Session_Technology {
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
[[Bitwise-able technologies to allow for a network session.
]]
2016-11-10 08:45:11 -08:00
unknown = 0, [[Type: unknown]]
/* system = (1 << 0), [[Type: system]]*/
ethernet = (1 << 1), [[Type: ethernet]]
wifi = (1 << 2), [[Type: WiFi]]
bluetooth = (1 << 3), [[Type: Bluetooth]]
cellular = (1 << 4), [[Type: cellular/mobile]]
/* gps = (1 << 5), [[Type: GPS]]*/
vpn = (1 << 6), [[Type: Virtual Private Network]]
gadget = (1 << 7), [[Type: USB gadget]]
/* p2p = (1 << 8), [[Type: Peer-2-Peer]]*/
2018-05-23 02:21:10 -07:00
all = (Efl.Net.Session_Technology.ethernet | Efl.Net.Session_Technology.wifi | Efl.Net.Session_Technology.bluetooth | Efl.Net.Session_Technology.cellular | Efl.Net.Session_Technology.vpn | Efl.Net.Session_Technology.gadget), [[All technology types]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
2019-02-14 08:37:02 -08:00
class @beta Efl.Net.Session extends Efl.Loop_Consumer {
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
[[Used by application to request network connectivity.
This API is targeted at applications that need access to the
network, specifying the allowed bearer technologies to connect
2017-12-20 09:30:29 -08:00
to the internet, as well as whether local networking is enough
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
or validated internet access is required.
2017-12-20 09:30:29 -08:00
Some platforms may not implement the backend for this class. In
this cases the system will report always @.state "online"
2018-05-23 02:21:10 -07:00
(@Efl.Net.Session_State.online) and other properties will be
2019-09-10 07:05:44 -07:00
$NULL, such as @.network_name, @.interface, @.ipv4 and @.ipv6; as well as
2018-05-23 02:21:10 -07:00
@.technology is set to @Efl.Net.Session_Technology.unknown. As such
2017-12-20 09:30:29 -08:00
if you need to detect for an actual backend, check if the
2019-09-10 07:05:44 -07:00
state is online but those properties are $NULL or technology is
2016-11-18 12:11:51 -08:00
unknown.
2018-11-28 04:33:46 -08:00
Note: the @.connect method is subject to backend policy. For
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
instance, ConnMan uses
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
]]
events {
efl: Add missing event types
Summary:
All events must have a type now, otherwise bindings don't know how to handle
the event_info field.
Most of the missing event types were actually "void" (no event_info present).
Some struct definitions had to be moved to eo instead of h files, so they
are available to bindings. Some have not, and are marked with FIXME.
Some namespaces have been fixed (like Efl_Event_Cb -> Efl.Event_Cb).
In general, there are hundreds of changed files, but mostly to add a type which
was not present before, so there's no harm done.
Also, A lot of FIXMEs have been added which should be, like, fixed.
For example, some events can send different types of event_info, which is
very inconvenient (and error prone).
Test Plan: make with c# bindings works, make check and make examples work too.
Reviewers: cedric, q66, lauromoura
Subscribers: zmike
Tags: #efl
Differential Revision: https://phab.enlightenment.org/D6169
2018-05-11 08:20:40 -07:00
changed: void; [[Called when some properties were changed.]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
methods {
connect {
[[Asks the session to be connected.
2017-12-20 09:30:29 -08:00
This method doesn't need to be called if an
application only needs to monitor the connectivity state,
such as a poller which will only try to access the
webservice when there is an existing connection, without
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
triggering one.
This method is subject to backend policy. For instance,
ConnMan uses
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
]]
params {
2016-11-11 06:35:48 -08:00
online_required: bool; [[If $false, access points with local state are enough. If $true, the access point must be in online state, with a validated internet connection]]
2018-05-23 02:21:10 -07:00
technologies_allowed: Efl.Net.Session_Technology; [[Bitwise OR of technologies to allow]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
disconnect {
[[Indicates this session doesn't need a connection anymore.
This reverses the effect of @.connect, let the system
2017-12-20 09:30:29 -08:00
disconnect if nothing else needs a connection. You can
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
still use the session object to monitor the connectivity
state via properties and "changed" event.
]]
}
2018-02-14 18:14:52 -08:00
@property network_name {
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
[[The user-friendly access point name.]]
get { }
values {
2016-11-11 06:35:48 -08:00
name: string; [[Access point name]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
@property state {
2016-11-18 12:11:51 -08:00
[[If the session connectivity is offline, local or online.
2018-11-28 04:33:46 -08:00
Note: if there is no backend for this class, then state
2016-11-18 12:11:51 -08:00
will be always online, however @.technology will be
2018-02-14 18:14:52 -08:00
unknown, @.interface, @.network_name, @.ipv4 and @.ipv6 will be
2019-09-10 07:05:44 -07:00
$NULL.
2016-11-18 12:11:51 -08:00
]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
get { }
values {
2018-05-23 02:21:10 -07:00
state: Efl.Net.Session_State; [[Network session state]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
@property technology {
[[The access point technology that backs this session]]
get { }
values {
2018-05-23 02:21:10 -07:00
technology: Efl.Net.Session_Technology; [[Network session technology]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
@property interface {
[[The interface allows the application to assign the socket to a given device using SO_BINDTODEVICE]]
get { }
values {
2016-11-11 06:35:48 -08:00
interface: string; [[Network interface to bind to]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
@property ipv4 {
[[IPv4 in use for this session.]]
get { }
values {
2016-11-11 06:35:48 -08:00
address: string; [[IPv4 address]]
netmask: string; [[IPv4 netmask]]
gateway: string; [[IPv4 gateway]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
@property ipv6 {
[[IPv6 in use for this session.]]
get { }
values {
2016-11-11 06:35:48 -08:00
address: string; [[IPv6 address]]
prefix_length: uint8; [[IPv6 prefix]]
netmask: string; [[IPv6 netmask]]
gateway: string; [[IPv6 gateway]]
efl_net_session and efl_net_control for ConnMan
These are objects to allow control of networking devices
(efl_net_control) as well as an application to request for
connectivity (efl_net_session).
They are loosely based on ConnMan.org, which we already use in
Enlightenment Window Manager via DBus access with Eldbus. However they
do not map 1:1 as the goal was to expose a viable subset of controls
but in a simple and general way, thus nome strings were converted to
enums, some arrays of strings were converted to bitwise flags, some
names were made more general, such as "service" was turned into
"access point" so it doesn't generate confusion with other "network
services" (ie: http server), or "favorite" that was renamed to
"remembered". Some behavior are slightly different (yet able to be
implemented on top), such as "Service.MoveBefore" and "MoveAfter" were
converted to a numeric "priority", calculated from service's list
index, changing the priority will reoder the list and thus generate
the MoveBefore and MoveAfter DBus commands.
ConnMan was chosen not only because we already use it, but because its
DBus API is sane and simple, with the server doing almost all that we
need. This is visible in the efl_net_session, which is completely done
in the server and do not require any extra work on our side -- aside
from talking DBus and converting to Eo, which is a major work :-D
NOTE: ConnMan doesn't use FreeDesktop.Org DBus interfaces such as
Properties and ObjectManager, thus we cannot use
eldbus_model_object.
There are two examples added:
- efl_net_session_example: monitors the connection available for an
application and try to connect. You need a connman compiled with
session_policy_local and a configuration file explained in
https://github.com/aldebaran/connman/blob/master/doc/session-policy-format.txt
to get a connection if nothing is connected. Otherwise it will just
monitor the connectivity state.
- efl_net_control_example: monitors, plays the agent and configure
the network details. It can enable/disable technologies, connect to
access points (services) and configure them. It's quite extensive
as allows testing all of ConnMan's DBus API except P2P (Peers).
2016-09-15 17:43:19 -07:00
}
}
}
implements {
Efl.Object.destructor;
Efl.Object.constructor;
Efl.Object.finalize;
}
}