Ran reformat-code on the tree.
Also merged in Azundris' Escreen patch. It's disabled by default for
the moment pending further testing, but you can enable it manually by
defining ESCREEN.
SVN revision: 6202
Use safe_print_string() to decode string defines before printing them
in --version output. This fixes Debian bug #143328, submitted by
Tom Gilbert <tom@linuxbrit.co.uk>.
Also removed '~' from the CUTCHARS compiled-in default. (It had
already been removed from the themes.) Makes double-click selection
of URL's easier. Requested by Laurence J. Lane <ljlane@debian.org>.
SVN revision: 6152
Fixed a warning that got missed before. Also removed the colour
scheme that no one liked. I left it in the Eterm theme, though...just
commented it out. I also put back the old font lines and commented
those out too. The Eterm theme config file is intended as a teaching
tool as well as a theme config. :)
SVN revision: 5982
I think Ted made the right call for the wrong reason. I'm adding the
fallback value for CONFIG_BUFF so that people using the older libast
will be able to use 0.9.2. I'd like to get 0.9.2 out the door soon,
but libast 0.5 is far from ready. :-)
SVN revision: 5967
Fixed a couple remaining bugs in 0.9.1, including that really
annoying problem people keeping whining about where Eterm won't build
without Imlib2. It will now. :P
SVN revision: 5543
Fixed the problem where the wrong font would end up in your menus and
buttonbars if you enable multibyte support but don't have a specific
encoding in use. I also corrected a large number of misplaced
newlines in error messages; I think that was some Perl-fu gone awry.
SVN revision: 4980
Several changes here, many of which come from the Debian bug list or
from bug reports on IRC. First off, I believe I've fixed an install
issue with the bg/ directory. I also put an alternative acsc line in
the terminfo file to see if it fixes anything on Debian. (RH works
fine.) I removed the "main" context from all the theme files...which
is something I should've done ages ago, but I forgot.
I made a couple things options which were not previously configurable.
The proportional font thingie which shrank the character cell width is
now the --proportional option. The automatic window gravity on resize
is now the --resize-gravity option. Both are boolean, and both are
documented in the man page.
And finally, I added the kill() function to the script language. At
this point it can only take signals as numbers, but that's good enough
for now.
SVN revision: 4857
Added a -a/--attribute option for passing config file stuff to the
parser on the command line. Also got the command line option section
of the man page up to date. I'll tackle the rest some other time;
it's late. :-)
SVN revision: 4820
There is now a new mechanism for dealing with the background image
collection, including a new update script. Please read the newly-
rewritten bg/README.backgrounds for details.
Also, I'm trying to flesh out the Contributors list in that file, but
my memory isn't cooperating. So if you contributed one of the
backgrounds, or know someone who did, please let me know.
SVN revision: 4810
Okay, first off, I removed 3 scaled backgrounds. See www.kainx.org or
my post to enlightenment-devel for details.
Second, I redid the default bindings for the mouse wheel. Basically,
the wheel alone will scroll by pages. Ctrl+wheel will scroll by pages
in groups of 5. Shift+wheel will scroll by a single line. If you
hold down the Alt key, the same combinations will work the same way,
but instead of scrolling within Eterm, they'll scroll the application
in the terminal (by sending PgUp/PgDn and up/down arrows). This works
in less, bash, and any other application which groks those keys.
I also added a --without-mousewheel option to configure that will turn
off the default scrollwheel bindings. Of course, you can always use
action bindings in the config file to bind/rebind these any way you
like.
While I was at it, I found and fixed a bug in the handling of the
Alt and Meta keys.
I added a scroll() function to the script stuff which allows you to
bind keys/buttons to scroll up and down. While I was at it, I added
comments to script.c for each function you can use.
And finally, the config file parser was moved to libast.
SVN revision: 4806
Fixed several bugs in the saving of settings and the support of
scripts in menus. Also fixed the definition of term_name in the theme
files as pointed out by Laurence J. Lane <ljlane@debian.org>.
SVN revision: 4750
Applied a couple patches I'd overlooked in my inbox. Sebastian
Dransfeld <sebastid@stud.ntnu.no> added a config file option to
duplicate the behavior of the --buttonbar command-line option. He
also updated the man page, something I usually put off until just
before I do a release. :-)
I also went back and redid the way Eterm does backquote execution to
avoid a potential race condition.
SVN revision: 4083
Moved the HAVE_SAVED_UIDS define into a configure option so that the
FreeBSD folks will have an easier time with it.
Fixed "make distcheck" which broke at some point.
That X stuff in clean_exit() should only happen if we're debugging.
Nobody but me should have to deal with those random hangs. :-)
Added a patch for multibyte cursor support from Michael C. Wu
<keichii@iteration.net> and Sung-Hyun Nam <namsh@lgic.co.kr>, along
with some other FreeBSD-related patches from Mr. Wu.
SVN revision: 4065
At the request of Snow-Man <sfrost@snowman.net>, I added the build
date to the output of --version. While I was at it, I also added the
RCS ident strings.
I also applied a patch from Sung-Hyun Nam <namsh@lgic.co.kr> that
fixes XIM-related seg faults during clean-up.
SVN revision: 3919
VA bought some licenses for Insure++, so I've been using it to audit
Eterm. These are just the initial results of the collaboration; there
will most likely be more. So far things are looking pretty good. I
just wish Insure++ had more helpful messages. I'd really love to be
able to track down those reads/writes involving freed pointers that
it claims to have found in Imlib2....
I also had to try and make the build work without MMX. I did so; I
just hope it still works *with* MMX.... =)
SVN revision: 3895
Since someone wanted it, if no name is given but an exec line (the -e
option) is given, the name defaults to the first word in the exec line
instead of "Eterm-<version>". For example, Eterm -e ssh foo would get
the title "ssh". NOTE: Most Eterm themes already specify a name, so
this will not work with those themes.
SVN revision: 3886
Fixed the error message bug I noticed. There's also a big5 fix from
Chung-Yen Chang <candyz@cle.linux.org.tw>, and I got rid of some
tiny memory leaks in the X data, the first of which was noticed by
zed@linuxpower.org.
SVN revision: 3844
Several small changes, like freeing pixmaps which won't be needed
later, reducing the default Imlib2 cache size to 0 bytes (we don't
really use it well), and an image path bugfix spotted by Teodor
Zlatanov <tzz@iglou.com>.
The big change, of course, is the disappearance of libmej and the new
dependency on libast, which is now distributed separately.
SVN revision: 3793
Okay, everything seems hunky-dorey now. If you have memory debugging
turned on, exiting Eterm will give a dump of the leftover allocated
memory including where it came from and how much there is. You'll
also get a listing of all the remaining Pixmap ID's and GC ID's along
with where they were created.
I also added some macros to the debugging stuff in libmej.h so that
if you pass the --without-debugging option to ./configure, it will
optimize out all the ASSERT and REQUIRE goop. This will make it
harder to trap bugs before they cause problems, so don't do it if you
want to help development, but if speed is critical to you, give it a
shot.
SVN revision: 3294
That should fix the crashes. Somehow I managed to temporarily forget
about pointer arithmetic. And somehow I thought trying to dereference
a pixmap ID would be a good thing. Sigh. I need sleep.
SVN revision: 3292
Massive reorganization/rewrite to libmej. It should now be 100%
independent of Eterm. There still may be some gremlins in the memory
debugging code, so don't use too high a number with --debug....
SVN revision: 3282
Color modifiers for images now work once again. Please report any
problems you find with them as soon as possible; I want to get 0.9.1
out the door in the fairly near future since the TODO list for 0.9.2
is already sizeable.
SVN revision: 3241
Two more patches from Marius Gedminas <mgedmin@takas.lt>. The first
one allows for customization of the message displayed when Eterm goes
into pause mode. There are actually two; one goes in the titlebar,
and the other is displayed in the text window.
His second patch makes Eterm's behavior a little smarter when it
resizes itself. It tries to figure out which quadrant of the screen
it's on and resizes in the most appropriate direction. (For example,
Ctrl-GreaterThan on an Eterm in the lower right corner will cause the
upper left corner of the Eterm to move; the lower right corner will
stay put.)
Thanks again to Marius for saving me time by sending patches. :-)
SVN revision: 2912
Marius Gedminas <mgedmin@takas.lt> reported a couple of issues back
when he was on his bug-spotting binge that I didn't have time to fix
just then. Well, now I've fixed them. ~/.Eterm/user.cfg will now
be found if there isn't a theme-specific one; this allows you to have
a single user.cfg which specifies some options you want all your
Eterms to have.
Along those same lines, the action code now searches for duplicate
bindings and changes the existing one rather than adding a new one
to the end of the list. This allows bindings in user.cfg to override
those in theme.cfg (as they should). Also, bindings are added in
reverse order, so newer ones (like in user.cfg) take precedence over
older ones (like in theme.cfg) if there is a conflict (e.g., if your
theme.cfg binds "anymod button2" and user.cfg binds "ctrl button2,"
user.cfg wins).
SVN revision: 2901
Okay, first off I need to thank Marius Gedminas <mgedmin@takas.lt>.
Not only did he point out several issues, he was even willing to send
a patch. :-)
This commit includes Marius' patch which keeps MappingNotify events
from overriding users' modifier settings. It also includes a fix to
a seg fault that he pointed out when menus were loaded without the
menu imageclass having been defined.
He also pointed out that --pause tends to sit and spin, taking up 100%
of the CPU time. Funny how E-Cpu never seemed to get too bent out of
shape over it, but he was indeed correct.
Thus I have fixed it, and while doing so, I have changed the way it
works. It no longer waits for a keypress per se. Actually, it just
ignores the fact that its child went away and keeps right on taking
X events. There are a few exceptions though. Either ESC or Ctrl-C
will exit a paused Eterm. Any other input that doesn't have special
meaning to Eterm will be ignored. (Shift-PgUp and Shift-PgDn still
work however, as do any action bindings you may have.)
SVN revision: 2739
My attempt to track down the strange X errors have revealed that a
pixmap given to me by Imlib2 is getting freed somehow behind my back.
Probably because this part of Imlib2 hadn't been tested before Eterm
was converted. =P
It doesn't seem to happen in XFree86 4.0; I'm wondering if XFree 4 is
smart enough to detect double-frees of old XID's and just ignore them?
Well, I'm going to have to add some debugging code to Imlib2 and see
if I can track down where it's freeing my pixmaps. But I have some
errands to run first, so I'm going to commit this for now. It
shouldn't actually change any functionality.
SVN revision: 2722
Okay, there are a few changes here. First off, I made multi-byte font
support the default now, as long as you have ISO 10646 fonts. In
order to do this, I made the default encoding type "Latin1" so as not
to interfere with 8-bit ISO 8859-1 characters. This means that if you
relied on the default multi-byte encoding method to be SJIS, you'll
need to update your theme files.
I also set it up so that Eterm will ignore SIGHUP, at least until I do
something with it (like reloading the theme or something).
I fixed the proportional font size algorithm. If there is more than
a 3-pixel variance between the minimum and maximum sizes for glyphs in
a proportional font, Eterm will set the size to 2 standard deviations
above the average width. This is so that they won't look so spread
out and ugly, but it still doesn't look perfect. Not much I can do on
that front...terminals must have fixed-width columns.
And then there's the biggie. I put in the ability to configure the
now-infamous font effects. I left a black drop shadow in as the
default, but you can now customize it via the --font-fx option or in
the config file using "font effects <stuff>" in the attributes
context. You can even use "fx" instead of "effects" for short.
So what goes in the <stuff> part? Well, you have several options.
To use a single-color outline, say "outline <color>". Likewise, a
single-color drop shadow is "shadow [corner] <color>"; "bottom_right"
is the default corner if you don't specify one. For a 3-D embossed
look, "emboss <dark_color> <light_color>". The opposite, a carved-
out look, can be had with "carved <dark_color> <light_color>". (Of
course, with those last two, the 3-D look will only work if you
choose the colors wisely.)
Those are all the shortcuts. The long way is to specify a series of
corner/color pairs, like "tl blue" for top-left blue, or
"bottom_right green". You can abbreviate using "tl," "tr," "bl," or
"br," or you can spell out "top_left," "top_right," "bottom_left," or
"bottom_right." If you omit a corner name, the first one defaults to
top-left, the second to top-right, and so on as listed above.
SVN revision: 2714
After getting sick of hearing people whining about the obscure error
messages that resulted from trying to build without pixmap support, I
hacked it until it at least built without it. I also added warnings
to configure.in so that people would know if that happened.
It's still not very happy running that way, which is something I need
to fix. But hopefully it will stop the whining.
Yeah, right. =P
SVN revision: 2590
I fixed the problem reported by Joakim Bodin <bodin@dreamhosted.com>
with spawned processes. Also fixed Esetroot as reported by Wayne
Johnson <bigman1@alltel.net>.
Support for buttons higher than 5 was also added to the action
bindings code for those (like me) with IntelliMouse Explorers and
XFree86 4.0. :-)
SVN revision: 2494
This is the initial commit with Imlib2 support. READ THIS CAREFULLY.
There is important information in this commit message that will keep
you from getting screwed.
First off, support for Imlib 1.x is GONE. It is no longer supported
as of now. If you want to continue using it, do NOT install this
version. I tried to support both for awhile, but the code ended up
being way too ugly and hackish. Imlib2 is the future. And trust me,
when you see what we do with this future, you'll be happy for the
switch.
The good news is that most of the basics work. Transparency still
works, and the basic image stuff works. Most users won't notice any
major problems, so long as your Imlib2 is 100% up-to-date.
However, a few things still don't work:
1. Auto mode is a bit broken. You'll get X errors in XFree86 4.0.
Don't use it if you're running XFree 4.
2. Color modifiers for images don't work. At all.
3. Transparency shading/tinting will not work in 8bpp or lower. Life
blows sometimes. Sorry. Time for a real video card. :-)
4. The built-in icon is broken.
5. You WILL need to update your theme.cfg files. The borders on the
horizontal and vertical bar images were incorrect when combined with
the new anti-aliased scaling. The horizontal bars should have a right
border of 3. Vertical bars should have a bottom border of 3. The
menu images should have both right *and* bottom borders of 3. You can
either make those changes by hand, or use the --with-theme-update
option to autogen.sh. Your call.
I think that covers everything I've run into. I will point out that
I don't really take advantage of a lot of the Imlib2 features just
yet. My first priority is to make all the stuff that worked before
work again (or at least the important stuff). Then I'll work on
new features.
So there it is. If you're not ready for it, don't use it. But if you
are, I hope you like it.
SVN revision: 2478
Michael Jennings
tzz