visually when u start to drag a window in pager it raises because of
dnd... so raise the real window too so they match. it looked weird
otherwise.
@fix
Summary: This fixes issues where erroneous udev detections of batteries are included. @bu5hm4n and I both have had issues where udev thinks we have two batteries because our hid/touchscreens report a battery even though they are not accurate. The problem is batman will then think there are two batteries and calculate battery percentage based off both batteries. For instance if the laptop battery is 100% and it is detecting this phony hid battery, the result is batman thinks you are at 50% battery life. This also fixes the battery removal code which should only remove the battery with the syspath the function is called with. The code was actually removing every single battery.
Test Plan: You have to have a device that udev reports two batteries for when there aren't two. It should be harmless to not include batteries that have never been charged, have no charge, and have unknown for their status.
Reviewers: bu5hm4n, raster, zmike!, devilhorns
Reviewed By: raster
Subscribers: cedric, bu5hm4n
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D7736
Summary:
This commit bring the support to set a profile on audio hardware via
pulseaudio. You are now able to configure the output of your audio
hardware via emixer without the help of pavucontrol.
@fix T3127
Reviewers: zmike!, devilhorns
Subscribers: cedric
Tags: #enlightenment-git
Maniphest Tasks: T3127
Differential Revision: https://phab.enlightenment.org/D7569
so i've been seeing this thing where inputs are deleted and then the
sink is appropriately deleted from clients but not all the client
windows it could have been on. the problem seems to manifest if
multiple windows come from the same app playing audio so the sink may
be assigned to only 1 window not all of them.
this seems to nuke the segv as the sink/input was being left dangling on a
window due to the logic in the add/del handling to give up when it finds the
first window target and not all of them.
so after a day or so of testing my segv's are gone. yay!
@fix.
the callback uses a subset of the arguments (taking advantage that our
first arg is void * data) so it can re-use across callback types. void
* makes this case not complain as oposed to casint to a specific fn
sig type from another.
Summary:
Now the time in blanking setup could be increased to 23 hours 59 minutes and
59 seconds.
@fix T3589
Reviewers: zmike, devilhorns
Reviewed By: zmike
Subscribers: cedric
Tags: #enlightenment-git
Maniphest Tasks: T3589
Differential Revision: https://phab.enlightenment.org/D7586
Summary:
We move the creation of the popup to a timer to let double left click
event occur. This timer is set to the current double click time value.
@fix T354
Reviewers: zmike, devilhorns
Reviewed By: zmike
Subscribers: cedric
Tags: #enlightenment-git
Maniphest Tasks: T354
Differential Revision: https://phab.enlightenment.org/D7568
Summary:
As the pulseaudio sink could be created before the window, we list
sink_inputs from pulseaudio on client add event. This make to not miss
an association and provide the volume control feature as expected.
Reviewers: zmike, devilhorns
Reviewed By: zmike
Subscribers: cedric
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D7559
i got a whole mountain of eo invalid obj complaints from deskmirror
even on startup. the backtraces were long, but they all ended in
comp_object being invalid or null. it seesm deskmiror wasnt properly
tracking the deletion of comp_object outside and that led to this. i
simply set it up once and deleted it where it is no longer referenced
and all is good now. this may possibly in theory have led to odd bugs
but thanks to eo - unlikely.
@fix
Summary:
Animator was crashing due to invalid memory access.
This resolves this problem.
Test Plan:
* Add new gadget pager to desktop/bryce.
* Move window within pager boundaries.
* Finish window drag within pager.
* CRASH of animator thread (or worse).
* Apply patch.
* Use new peger without fear of disaster.
Reviewers: raster, zmike, cedric, stephenmhouston, devilhorns
Reviewed By: zmike
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D7536
Summary:
Moving _xdg_data_dirs_augment call to earlier in
initalisation process. Currently first-run will
leave XDG_MENU_PREFIX broken, thus the application
menu will be empty in E.
Seems eio_init might be the culprit.
Moved to above eio_init.
Test Plan:
* Launch E from X from a console (startx)
* Check application menu (empty).
* Apply patch.
* Launch E from X from a console (startx)
* E's Application menu should be populated.
Related to https://phab.enlightenment.org/D7534
Reviewers: #committers, raster, cedric, zmike, devilhorns
Reviewed By: #committers, zmike
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D7535
Fix a small issue with slider format value for Wayland mouse
acceleration display. This allows some finer grained control over
pointer acceleration under Wayland
Wayland mouse acceleration uses different values (via libinput) than
X11 does. As such, we need to check the compositor type when creating
the Mouse Input config dialog and adjust values accordingly.
ref T7534
@fix
so there are a bunch of nasties that bluez itself doent take care of -
like rfkill. some devices (many i seem to find) have rfkill enabled by
default at boot. the gui which select power on or off is largely
useless as asking bluze to do this has no effect or fails because a
separate rfkill subsystem is forcing things off. this is bizarre that
bluez doesnt take care of it, but since it doesn't, we hve to. we
already swizzled rfkill when u toggle the power checkbox, but not at
init power on on loging (based oon last known power state of the bt
adapter that was saved in config). i found the log saying power on
error due to rfkill, so adding an explicit rfkill unblock should...
help. and then if you have bt powered on - next boot it should be too.
power it off if you dont want ti on. then it will be explicitly
powrred off at init/boot/login.
i added 2 more device specific options, so i had to move all of the
device controls to an expandable button set. it's not brilliant
actually. the icons are poor and these probably should become toggle
like states rather than a button with an action. it's just not that
intuitive. this i think needs more theme styles in elm core theme
though, so for now keep what's there. but this was necessary due to
the ever expanding set to keep space usage sane.
now the 2 features are "force connect" for any device that is
discovered and responds to pings - connect to it if not connected.
this seems to not always work and maybe this should eventually be
removed, but this leads to there needing to be config per device so we
now have config storage for that like adapters.
the other feature which is much more interesting is the unlock
feature. this means if that bt device is around and responds to pings,
e will unlock (and only explicit manual locking will lock it), but
when that bt device stops responding to pings, e will lock. you could
use your phone, or smartwatch or any other bt device you have on your
all the time as some unlock device.
this required the fixing of the l2ping support in e_sys and i've fixed
it to properly work now and added an optional timeout value as input.
the unlock feature uses this and it pings bt devices on a frequency
that depends on e's powersave state which is dependent on if on ac, or
battery and what battery level is if you have the battery module
running. a handy feature to have just there at the click of a button.
i've kept the printf logging in for now so people trying it out get
some semblance of logging and state so they could figure out why
things are doing what they do and maybe debug it more easily.
it wasn't working. first response may not be a 200 ident so keep
looking for them. also send a bit more than 1 byte to be sure, and
chekc the response is what we sent to be sure. also enforce a timeout
(10sec here) where we give up so it doesn't hang possibly forever.
all in all l2ping in e_sys works again. now. in the process i added a
timeout param too.
@fix
the auto power-on wasn;'t working. what the module did was power the
bt adapoter on if the user last powered it on by default hen it
sees/detects the adapter. if the user last powered it off it will do
the reverse (power it off too). this is kind of a workartound because
bluez5 itself wont power the bt on.
we had multiple drag resistance values here - unify with 1 and make it
work, now it gets it right deciding between dnd and a long press menu
etc. etc. ...
while also still using the new menu system.
This binding check/action handler was removed, because I am assuming
that the presumption was that the only binding/action that was handled
was showing a menu? This was actually not the case. This
binding/action handler handled resizing, moving, dragging, etc... on
gadgets on the desktop and in the gadget bar. Without it using gadgets
was near impossible on the desktop and inconvenient on the gadget bar.
The longpress menu was only getting cancelled if a drag occured at a
distance of least 25 pixels. This is due to the code checking for horizontal drag
distance + vertical drag distance >= 25. I believe the intent here was
to cancel drag if >= 5 vertically or >= 5 horizontally, not both. Most
drags wouldn't be 25 pixels in a single gadget such as pager, and a 25
pixel drag would not happen quick enough to offset longpress. This
commit also lowers the drag cancelling threshold to 3 pixels, not 5.
This was obviously wrong, it was comparing
the geometry of the whole gadget instead of
the icon one. Now the menu doesn't always
act on the first icon ;)
This is how all the other new gaget are doing the
config popup, I copied from time gadget.
I really think the config popup creation (and size/show)
should be handled by E, not by each gadget. ATM this
code is repeated in every gadget.
hold mode is where if u hold mosue down menu stays only as long as
mouse is held down... then dismissed on up. doesnt work well when youa
re trying to overload a single click with longpresses and so on -
optionally turn it off. used in gadgets.
now right click on any gagdte in bryce and they ALL have a menu that
allows removal of the gagdte bar or the gadget as well as access to
gadget settings AND the ability for gadgets to extendthis menu like
lunhcer does per icon. now it's standard behavior everywhere which is
much easier to use and discover. it also removes code from every
gadget to do their own "button 3" handling as its handled centrally
making the code in gadgets simpler.
this is part of my effort to improve usability (mostly discoverability
and accessibility of settings/features).
also long press left mouse gets u gadget right click menu
this has to move many modules/gadgets actions to mouse up instead of
mouse down so the bryce has a chance to trap the events first and set
hold flags. but now long press for 0.5 sec and bryce menu come sup
(with left mouse .. so touch friendly).
in addition move context menu hanbdling to e_gadget instead of in
bryce and in e_gadget. a context callback is called so different
systems can still do different things. this should probably change to
always pop up a mnenu and simple call populate callbacks for site
owner specific content.
all in all it makes the new gagdtes more consistent, easier to use
(without a right mouse button), doesn't need special action bindings
etc. etc.
bryce was missing the ability to espose orientation to the child
items, so they were the same irrespective of orientation.
i also notice that orientaiont is a simple horiz/vert ... so no
ability to special case corners etc. in the theme... :( not sure if
this should be changed.
also fix the aspect calculation to round up correctly to avoid
off-by-1 pixel gaps i noticed with the pager - necessary for the
styling in the flat theme to be right.
but is not explicitly linking against it. Previously this was not
discovered due to a wrong flag in elementaries pkgconfig. However - the
new .pc file of elementary does not contain dl anymore (as no library
_needs_ to link against it when using elm). So we need to link this here
explicitly
Differential Revision: https://phab.enlightenment.org/D7150
Summary:
Previously if you had different wallpapers on different screens
then came back to the settings and changed the wallpaper ALL
screens would be set, and the painstaking work of setting
various wallpapers across desktops/screens is lost instantly.
This patch avoids this annoyance.
Reviewers: raster, zmike!, devilhorns
Reviewed By: raster
Subscribers: cedric
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D7141
Summary:
Prevent wayland clients from being able to destroy the compositor's
singleton keymap by making individual copies for each client.
Reviewers: zmike, devilhorns
Reviewed By: zmike, devilhorns
Subscribers: cedric
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D6861
Carsten Haitzler
Stephen 'Okra' Houston
Michael Bouchaud (yoz)
Alastair Poole
Christopher Michael
Davide Andreoli
Marcel Hollerbach
Derek Foreman