Summary:
The _ecore_con_post_event_server_upgrade() call adds an event to free
the server_upgrade object, svr, via _ecore_con_server_free(svr) so we
should assume srv is freed after it returns. Thus, perform the
pending_slice processing prior to calling it. Otherwise it triggers an
illegal access (USE_AFTER_FREE) error in Coverity.
@fix CID1373485
Reviewers: barbieri
Reviewed By: barbieri
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4785
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Test Plan:
- There are other grammatical errors, but I'm focusing this patch just
on pluralization-related issues to ease review and make it clearer if
I've introduced any inaccuracies.
Reviewers: cedric
Reviewed By: cedric
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4784
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
When popup is timeout, notify call hide func, and send time out event to popup.
After popup receiving time out event, popup hide object again,
so hide animation doesn't show.
And notify hide function doesn't send hide signal to block events part,
(but dismiss function send it)
So add that signal.
Test Plan:
1. elementary_test -to popup
2. click first item, "popup+center+text"
3. compare time out event before this patch and after.
@fix
Reviewers: herb, singh.amitesh, Hermet, cedric, raster, jpeg
Differential Revision: https://phab.enlightenment.org/D4780
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
See the previous commit. efl_provider_find() could not
find a canvas because the event object had no parent.
This restores the slider in E's sound mixer.
Note: Input events may expose the evas canvas object
because of parenting. This will eventually need fixing,
as only efl.ui.win should be exposed.
If 8ff2dffe7c7a21278dis backported to 1.19 then this patch
also needs to be merged as well.
Test scenario:
elementary_test -to "ExtScroller"
Try and modify a slider's value with the mouse wheel. Bad things
were happenning, as the flag ON_HOLD was not properly propagated
from the slider to the scroller. This is because the legacy
event_info structure inside the eo event info was not updated
with the new flag value.
By introducing a new EO only API, which is meant to remain
internal, we can use a single legacy info structure, fixing
this issue.
Note: In the future this API needs to be internal, not protected.
@fix
We have a report where the use of epoll breaks such systems. Disabling it for
now to make them work again. A deeper analysis is underway to understand this
better and maybe have epoll support later.
Prerequisites:
Disable scroll animation (in elementary_config)
Test case:
elementary_test -to Scroller
1. Scroll with the mouse wheel. Scrolling will not loop or anything.
2. Enable loop in Y, scroll to the top and to the bottom, verify
that scrolling loops fine and shows the last and first page in
full.
3. Enable page snapping, and repeat 2.
FIXME: Page snapping doesn't do much if you use thumbscroll or
drag the scrollbars.
FIXME: In the test case, Y +/- 1 is useless as the scroller snaps
to the pages even without snapping enabled.
@fix
The freeze property is a set() only but could internally
be reset to false, after dragging a vertical or horizontal slider.
Test scenario:
elementary_test -to scroller
Click Freeze, test the mouse wheel (can't do anything), drag a
scroller side bar, test the mouse wheel again.
Before this patch, the scroller would scroll. After the patch, the
scroller remains fixed, respecting the value of freeze.
FIXME: It is possible that the proper fix would be to disable
bars drag during freeze, but that is not the case currently.
NOTE: freeze, hold, movement_block, lock_x/y have very similar
meanings. The doc really needs clarification here, and some
property might be removed. Also, freeze and hold have no
getter, only a setter. drag_lock_x/y is part of elm_widget,
and not specific to scrollers.
If the scroll animation is disabled, we ended up with an
immediate call from inside a post-event callback to modify
the canvas geometry which led to feeding events. Since
99d21f6d9c and 54e5841b2f it is basically forbidden
to modify the canvas or feed events from the post-event cb.
This is because feeding events from inside the post-event
callback can break the logical order of operations between
post-event cb and event cb.
Note: This also implements no-animation scrolling for page
scroll, in case scroll animation is disabled (unifying the
code did that).
Fixes T5289 (abort inside E)
Test scenario:
elementary_test -to "Scroller 2"
Use the mouse wheel to scroll inside the horizontal scroller
(the one with many "...Horizontal scrolling..." buttons). This
scroller should scroll horizontally. When reaching the end of
this scroller, the main vertical scroller should take over
and scroll vertically, but only after a 0.5s timeout has passed.
Before this patch, you could wait forever and scrolling inside
the horizontal scroller would never trigger a scroll in the main
vertical scroller, despite reaching the end point.
In 1.18 both the main and the horizontal scrollers scroll
simultaneously. The imbricated vertical scrollers seem to work
as designed, but not H inside V.
@fix
Summary:
Before, rsc->current_ctx is always same with ctx.
So checking context change was meaningless.
From now, it has meaning.
Test Plan: App call evas_gl_make_current more than twice in pixels callback. Those surfaces are indirect rendering surface.
Reviewers: jpeg, dkdk, wonsik
Reviewed By: jpeg
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D4773
Summary:
There's problem in Tizen3.0.
1. Clip set mask_obj to obj for masking.
2. Unset mask_obj from obj, and del mask_obj.
3. obj has clip.mask still. So obj is trying to do mask_subrender() for freeed mask_obj.
So reset clip.mask to NULL, If there isn't clipper.
Now, there's no routine for reseting clip.mask when clipper object is freed. isn't it?
Actually I'm not sure that clip.mask=NULL should be there as this patch.
Test Plan: Tizen3.0 wearable
Reviewers: cedric, raster, wonsik, jpeg
Subscribers: scholb.kim, dkdk
Differential Revision: https://phab.enlightenment.org/D4721
Signed-off-by: Jean-Philippe Andre <jp.andre@samsung.com>
Theoretical bug that may become real in the coming days - ecore_imf's
wayland module has the interface for the text input protocol. The
imf module gets unloaded after destroying the protocol object but
before receiving all events from the server destined for it.
Currently that's fine, but I've posted some wayland patches for
review that require the interface to remain present while the text
input object is a zombie. These patches cause some EFL apps to
crash on shutdown when they unmap the wayland imf module.
This moves the wayland interface bits into ecore_wl2 which doesn't
get unmapped.
Since 9b7ac51943 evas map tries to avoid recalculating
stuff when the map parameters have not changed. Unfortunately the
code in elementary_test -to "Flip Page" was badly written. It was
modifying a constant's internal value (after ugly cast). So the
memcmp() and all other checks would return successfully, as the
exact same pointer was being compared to itself.
So, I've fixed the comparison by adding some forgotten parameters
(perspective) but most importantly I fixed the map API usage in the
test case.
There are reports of crashes when y < 0. This case seems
abnormal in case of filters, as I don't know how to reproduce it,
but it's happened.
Thanks Youngbok Shin for the report.
@fix
An unfortunately very common misuse of clip is as follows:
- Layout A is created (edje object / elm_layout)
- Object B is swallowed inside A
- Clipper C is set to clip B
This is a invalid usage, as layout A takes control over the clip
property of B (just like it does for geometry, visibility, color...).
Since 75ec3a7338 edje_recalc resets the clip at every calc
loop, as it can change between states.
In the past, edje_recalc did not reset the clip so anyone could
(wrongly) swallow an object and then change its clip from C to modify
its color, mask it, blend it, etc... Even though this was not proper
use of the API, this is not very clearly documented, and since it
worked, it has been (ab)used a lot already.
The result now is that a clipper set from C will become visible
as an opaque white rectangle covering the entire UI. Booh.
This patch is a workaround that should have no impact on well
written applications. As a bonus this avoids an extra call to
clip_set() from edje.
@fix
Summary:
If the last item before ellipsis item has bigger width than its advance,
evas_common_font_query_last_up_to_pos() function can find wrong ellipsis position.
When Evas finds a position for non last item, Evas must care about additionally
available space for glyph's width of the given x position.
ex) the last item's glyph before ellipsis item has a tail to draw above the ellipsis item.
@fix
Test Plan:
Test case will added as comment.
(Becasue of font license problem.)
Reviewers: herdsman, raster, jpeg, woohyun
Subscribers: cedric, Blackmole
Differential Revision: https://phab.enlightenment.org/D4727
if you set config via environment variables then sa config
update/reload may end up overriding these again whenever it is updated
and thus may result in scaling or other things suddely changing
@fix
just match the ref with the drop anddon't also manually free the image
as this leads to accessing of freed memory which is not a good thing.
this should fix T5374
@fix
for dialers we should also monitor "resolved" from inner TCP socket
and emit that ourselves, letting people know that we have an IP
address.
this is important for ecore_con_legacy.c, since the svr->ip is only
decoded and stored once when this signal is emitted.
Since efl_net_ssl_context is immutable for a dialer and we create the
dialer with the context, the SSL cases uses a trick to postpone dialer
creation using a job, then it allows one main loop iteration for the
user to call various ecore_con_server_ssl_*() methods.
However this breaks immediate ecore_con_server_send() after
ecore_con_server_connect() as used to be allowed and used by
azy/erssd.
Most people wouldn't notice that, since the most common case is to
either use ecore_con_url (which uses cURL and a complete different
code path) OR they would wait for ECORE_CON_EVENT_SERVER_ADD prior to
sending data.
Nonetheless it was a compatibility issue and must be fixed.
Fixes T5339
We should be setting this to the context version we understand, not
the highest version supported by the library.
From Daniel Stone's recent intel-gpu-tools commit fixing the same bug:
With libdrm 2.4.78, setting a higher context version than 2 will attempt
to call the page_flip_handler2 vfunc if it was non-NULL, which being a
random chunk of stack memory, it might well have been.
The efl_ui_win overrides _elm_interface_atspi_component_extents_get to give
correct value if screen_coord is EINA_FALSE which means relative position.
The efl_ui_win has given its object geometry value + ecore evas geometry value.
The object geometry value was equal to the ecore evas geometry value, so the
relative position was not correct(twice of ecore evas geometry value).
old_clipper = evas_object_clip_get(objA);
evas_object_clip_unset(obj_A);
evas_object_clip_set(obj_A, new_clipper);
evas_object_del(old_clipper);
when old_clipper deleted, _clipper_del_cb unset the current new_clipper of obj_A.
Summary:
By 403b0ecfa6 the coreaudio
support was dropped.
So 'HAVE_COREAUDIO' define is invalid.
Reviewers: jpeg
Subscribers: cedric, woohyun
Differential Revision: https://phab.enlightenment.org/D4732
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary: Pointer ed->callbacks may have NULL value in callback add functions.
This reduce the chance of continue to kind of work for longer in case of memory
constrain. Maybe using Eina macro would be better.
Reviewers: jpeg, jypark
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4761
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Reviewers: jpeg, jypark
This could lead to a crash as we were checking against NULL on
the wrong pointer.
@fix
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4762
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary: Pointer eina_mempool_malloc return value may have NULL value when
module aren't properly installed. This reduce the chance of a crash and increase
the likelyness of properly handling the failure.
Reviewers: jpeg, jypark
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4763
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>