Summary: clang reports missing field initializers for usage of vt_mode
structure, so add the missing initializers
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary:
since all the libs got merged into libsystemd in 209, we can just check
for libsystemd
Reviewers: cedric
Subscribers: stefan_schmidt, morlenxus
Differential Revision: https://phab.enlightenment.org/D2984
Summary: This patch adds some checks to make sure that we can ignore
key events which are not seat wide state changes.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: As libinput has matured enough now, we can reduce the noise
in outputs logs by adjusting libinput log level priority
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a minor internal function to convert
DRM_MODE_SUBPIXEL values into something that the wayland protocol
supports.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This fixes T2465: QT5 apps don't work. The issue here is that
when the randr code runs in E we make calls to
ecore_drm_output_enable/disable which is supposed to register the
outputs with the wayland registry. This was not happening due to the
enable/disabled checks at the top of these functions.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: We should not be freeing an output when it gets unplugged (as
it may get replugged). Just disable rendering on that output
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: If we call these functions with an already disabled output,
we crash. Check for an output being 'enabled' before we make these
calls.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: As the gl_drm engine code will almost always pass NULL
rectangles, remove the EINA_SAFETY checks so that logs don't fill with
meaningles error messages.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: As it turns out, we don't need to make the call to set an
output mode during creation. The mode will end up getting set anyway
when we set the first buffer.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: If an output is disconnected, then we should not be trying to
set the mode of it's CRTC as that is going to fail anyway.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: We really do not need to check the enable flag here because
if we are setting a valid mode, then we will be enabled anyway
NB: This makes it actually possible to Enable/Disable outputs in the
RandR config dialog of E-Wl ;)
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This fixes a segfault which could happen if we enable an
output before setting the output current mode. Now we test for an
output having a current_mode, and if not we use the crtc size when
sending the output event.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This should not have been included in the previous push as it
was just debug noise which was added during testing
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function (ecore_drm_output_mode_set) that
we can use from within RandR code to set the resolution of an output
(or disable an output if NULL is passed in).
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This fixes ecore_drm_output_current_resolution_get function
to properly operate if an output does not have a current mode assigned.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This reduces the number of output events that wl_drm module
will receive from ecore-drm. We now only send those events when an
output gets enabled/disabled where previously we were also sending
them during output creation.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This greatly improves rendering speed in evas drm engine.
Previously we would always call drmModeSetCrtc regardless if it was
needed or not. These changes greatly improve rendering speed in drm as
we now only call drmModeSetCrtc if it is needed.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: These API functions should be used for enable/disable of a
given output. They were previously being misused to stop/start
rendering on an output when we VT switch away so now we add an
internal function we can call to disable/enable rendering.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: When we make a call to get the geometry of all outputs, we
should be skipping ones which are not connected.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This fixes an issue when searching for possible crtcs that an
output can work on. Previously, we would end up not returning any
possible crtcs due to not looping the crtcs of the resource.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new 'name' field to the Ecore_Drm_Event_Output
structure so that when we catch drm output events in E, we can compare
this name to find an e_randr screen and update compositor's outputs.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: As we will use the edid string inside RandR code to store
unique information about an output, we should be returning this edid
in a "readable" form.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: When we are parsing the edid string, if the string is random
junk, then we need to ignore it. Prior to this commit, we were not
setting the returned text properly.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to test if a given
Ecore_Drm_Output can be used on a given crtc. This is needed for DRM
RandR support
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function which we can use to mark a given
Ecore_Drm_Output as being the primary output.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to find an Ecore_Drm_Output
which matches a given name.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to return an output's crtc size.
This is mainly used for drm RandR config in E
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to return the output which is
marked as the primary output.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: As 'primary' output support is not implemented in hardware,
we need to support this feature via software. For now, the first
output returned via libdrm will be marked as 'primary' until user
changes it via config
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: If we do not set client capabilities to support universal
planes, then libdrm does not expose the primary or cursor planes so
this adds a quick call to set DRM_CLIENT_CAP_UNIVERSAL_PLANES
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: Makes more sense to set the output's connected property
inside the function which creates outputs.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a debug function to spit out planes and their
properties while debugging rotation support
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to return a list of modes
supported on a given output
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to call so we can check if a
given Ecore_Drm_Output has a backlight
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a new API function to return the connector type of
an Ecore_Drm_Output
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a connector type field to the Output structure.
This will be used in the Enlightenment Drm rendering code for RandR
config
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds new API function to return the min & max width &
height of valid screen range for an Ecore_Drm_Device
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: No real function changes, just commented out some debug lines
so we have less noise for release
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary:
the logind device close function just lets logind revoke fd permissions
but doesn't actually close the (now useless) fd.
@fix
Reviewers: devilhorns
Reviewed By: devilhorns
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2457
Summary:
0 is a valid fd. EINA_FALSE is 0. EINA_FALSE is a valid fd.
@fix
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2456
Summary:
Seems libinput wasn't bothering to set this so all child processes get
their hands on input devices
@fix
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2455
Summary:
ecore-drm touch down handler does not produce ECORE_EVENT_MOUSE_MOVE event.
so, when user touches screen, application can't handle mouse down event correctly.
this fix adds touch_motion event on touch_down event handler.
Reviewers: zmike, cedric, raster, gwanglim, devilhorns
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2427
Summary:
At the first time after finishing booting, the position of mouse cursor is in the
center of screen. But e doesn't know it. ecore_drm should let e know the initial
position of cursor by sending a fake motino event.
Reviewers: devilhorns, ManMower, zmike, raster, gwanglim
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2410
Summary:
This revision fixed using of uninitialized value 'output'.
The usage can cause segmentation fault when it try to refer current_mode
@fix
Reviewers: devilhorns
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2448
Summary:
If an input device is assigned via udev to an output that we can't find
we just assign it to the first output instead.
Reviewers: zmike, devilhorns
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2408
Summary: This is not actually "critical", it just means that we tried
to set a dumb buffer of the wrong size. Ecore_Evas will call this
function again after the canvas has been resized to the proper size,
so just issue a WRN here.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: It was mentioned on the mailing list to use #if 0 instead of
commenting the block. This does not change any functionality
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: As we no longer require the idler to repaint outputs, comment
out the function that was defined for the idler.
NB: I left it commented (and not totally removed) just in case it is
needed for a later (undiscovered) issue
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This is a better way to allow mouse movement across multiple
outputs as this does not require us to fetch output geometry on Every
mouse movement (as before).
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: When running E-Wl with multiple outputs, we could not
previously move the mouse pointer across to the second output. This
commit fixes that issue.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: In order to process hotplugging of outputs, we need to send
the 'dev' structure as data to the callback so that we can update
outputs. This fixes hotplugging of outputs when running E
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds a pending_flip field to Ecore_Drm_Fb structure so
that when we schedule a pageflip event we can wait until the flip is
complete before trying to reuse the buffer again.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This modifies the ecore_drm_device pageflip function to make
use of the ecore_drm_fb callbacks passed into the ecore_drm_fb_send
function
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds 2 new API functions we can use from within the evas
drm engine to set framebuffers as current, and to call a pageflip on
given buffers.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This commit adds an API function that can be used to find an
output given an x/y coordinate pair.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This API was added in the header while testing a theory, and
should not have been committed.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: Since we only create one drm context in the drm_device
structure now, we need the drm headers to be included in Ecore_Drm.h
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This changes allows us to reuse the same drmEventContext once
so that when we get drm events, we are not constantly recreating the
drmEventContext.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This marks an Ecore_Drm_Device as active or not when we VT
switch. We do this so we can skip rendering if we are not active.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: Since we now create the dumb buffers in the ecore_drm_device
structure, we don't need them on a per-output basis. This commit fixes
the output & device code to adjust to this.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This adds an API we can call from ecore_evas to setup the
device for software rendering which will cause dumb buffers to be
created in the Ecore_Drm_Device structure.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: No real need for each output to have its own framebuffers as
we can just create dumb buffers in the drm device structure
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: When we make the call to outputs_geometry_get, we should NOT
include cloned outputs in the final size.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: If an output has a pending page flip, we cannot destroy it
until the page flip has completed. This commit adds support to delay
destroying an output until the page flip is completed.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This refactors the output creation code to support better
mode detection, cloning of hotplugged outputs, and initial support for
setting of output gamma (API to follow)
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This commit adds support for setting DPMS level of an output.
This adds a new API function 'ecore_drm_output_dpms_set' to set the
level.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary: This fixes an issue where heights of all outputs would get
added, thus causing the ecore_evas to be created at the wrong size.
Now, the height will be whichever output is larger.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>