enlightenment/enlightenment
enlightenment
/
enlightenment
10
9
Fork 12
Code Issues 24 Pull Requests 2 Projects Releases Wiki Activity
enlightenment/src/bin/e_powersave.h

54 lines
1.7 KiB
C
Raw Normal View History

e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
#ifdef E_TYPEDEFS
typedef enum _E_Powersave_Mode
{
E_POWERSAVE_MODE_NONE,
E_POWERSAVE_MODE_LOW,
E_POWERSAVE_MODE_MEDIUM,
E_POWERSAVE_MODE_HIGH,
E_POWERSAVE_MODE_EXTREME
} E_Powersave_Mode;
typedef struct _E_Powersave_Deferred_Action E_Powersave_Deferred_Action;
E_EVENT_POWERSAVE_UPDATE for the masses cpufreq auto-changes the governor depending on the powersave mode SVN revision: 37788
2008-11-24 00:32:34 -08:00
typedef struct _E_Event_Powersave_Update E_Event_Powersave_Update;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
#else
#ifndef E_POWERSAVE_H
#define E_POWERSAVE_H
enlightenment: Make E build again with EFL from git sed -i 's/EAPI/E_API/g' Signed-off-by: Chris Michael <cp.michael@samsung.com>
2015-05-07 12:13:10 -07:00
extern E_API int E_EVENT_POWERSAVE_UPDATE;
extern E_API int E_EVENT_POWERSAVE_CONFIG_UPDATE;
E_EVENT_POWERSAVE_UPDATE for the masses cpufreq auto-changes the governor depending on the powersave mode SVN revision: 37788
2008-11-24 00:32:34 -08:00
e17: whitespaces-- SVN revision: 72561
2012-06-20 23:19:43 -07:00
struct _E_Event_Powersave_Update
E_EVENT_POWERSAVE_UPDATE for the masses cpufreq auto-changes the governor depending on the powersave mode SVN revision: 37788
2008-11-24 00:32:34 -08:00
{
E_Powersave_Mode mode;
};
convert init/shutdown to EINTERN, move some to _update(). Do not abuse the concept of e_*_init(), make them call-once and those that needed multiple call are renamed to e_*_update(). To make sure convert them to EINTERN so the symbols are not exported. Actually I guess too much is exported as EAPI while they should be EINTERN, but that would require manual investigation, while this patch was basically created with sed + grep. SVN revision: 54795
2010-11-22 07:21:32 -08:00
EINTERN int e_powersave_init(void);
EINTERN int e_powersave_shutdown(void);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
enlightenment: Make E build again with EFL from git sed -i 's/EAPI/E_API/g' Signed-off-by: Chris Michael <cp.michael@samsung.com>
2015-05-07 12:13:10 -07:00
E_API E_Powersave_Deferred_Action *e_powersave_deferred_action_add(void (*func) (void *data), const void *data);
E_API void e_powersave_deferred_action_del(E_Powersave_Deferred_Action *pa);
E_API void e_powersave_mode_set(E_Powersave_Mode mode);
E_API E_Powersave_Mode e_powersave_mode_get(void);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* FIXME: in the powersave system add things like pre-loading entire files
* int memory for pre-caching to avoid disk spinup, when in an appropriate
* powersave mode */
/* FIXME: in powersave mode also add the ability to reduce framerate when
* at a particular powersave mode */
powersave todo: reduce timer precision. SVN revision: 37613
2008-11-13 13:32:05 -08:00
/* FIXME: in powersave mode also reduce ecore timer precision, so timers
* will be dispatched together and system will wakeup less. */
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* FIXME: in powersave mode also add the ability to change screenblanker
* preferences when in powersave mode as well as check in the screensaver
* has kicked in */
/* FIXME: in powersave mode also if screenblanker has kicked in be able to
* auto-suspend etc. etc. */
#endif
#endif