enlightenment/src/bin/e_powersave.c

189 lines
4.1 KiB
C
Raw Normal View History

e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
#include "e.h"
struct _E_Powersave_Deferred_Action
{
void (*func) (void *data);
const void *data;
unsigned char delete_me : 1;
};
/* local subsystem functions */
static Eina_Bool _e_powersave_cb_deferred_timer(void *data);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
static void _e_powersave_mode_eval(void);
static void _e_powersave_event_update_free(void *data __UNUSED__, void *event);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
/* local subsystem globals */
EAPI int E_EVENT_POWERSAVE_UPDATE = 0;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
static int walking_deferred_actions = 0;
static Eina_List *deferred_actions = NULL;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
static Ecore_Timer *deferred_timer = NULL;
static E_Powersave_Mode powersave_mode_min = E_POWERSAVE_MODE_NONE;
static E_Powersave_Mode powersave_mode_max = E_POWERSAVE_MODE_EXTREME;
static E_Powersave_Mode powersave_mode = E_POWERSAVE_MODE_LOW;
static double defer_time = 5.0;
/* externally accessible functions */
EINTERN int
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_powersave_init(void)
{
_e_powersave_mode_eval();
E_EVENT_POWERSAVE_UPDATE = ecore_event_type_new();
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
return 1;
}
EINTERN int
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
e_powersave_shutdown(void)
{
return 1;
}
EAPI E_Powersave_Deferred_Action *
e_powersave_deferred_action_add(void (*func) (void *data), const void *data)
{
E_Powersave_Deferred_Action *pa;
pa = calloc(1, sizeof(E_Powersave_Deferred_Action));
if (!pa) return NULL;
if (deferred_timer) ecore_timer_del(deferred_timer);
deferred_timer = ecore_timer_add(defer_time,
_e_powersave_cb_deferred_timer,
NULL);
pa->func = func;
pa->data = data;
deferred_actions = eina_list_append(deferred_actions, pa);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
return pa;
}
EAPI void
e_powersave_deferred_action_del(E_Powersave_Deferred_Action *pa)
{
if (walking_deferred_actions)
{
pa->delete_me = 1;
return;
}
else
{
deferred_actions = eina_list_remove(deferred_actions, pa);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
free(pa);
if (!deferred_actions)
{
if (deferred_timer)
{
ecore_timer_del(deferred_timer);
deferred_timer = NULL;
}
}
}
}
EAPI void
e_powersave_mode_min_set(E_Powersave_Mode mode)
{
powersave_mode_min = mode;
e_powersave_mode_set(powersave_mode);
}
EAPI void
e_powersave_mode_max_set(E_Powersave_Mode mode)
{
powersave_mode_max = mode;
e_powersave_mode_set(powersave_mode);
}
EAPI void
e_powersave_mode_set(E_Powersave_Mode mode)
{
E_Event_Powersave_Update *ev;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
if (mode < powersave_mode_min) mode = powersave_mode_min;
else if (mode > powersave_mode_max) mode = powersave_mode_max;
if (powersave_mode == mode) return;
printf("CHANGE PW SAVE MODE TO %i / %i\n", (int)mode, E_POWERSAVE_MODE_EXTREME);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
powersave_mode = mode;
ev = E_NEW(E_Event_Powersave_Update, 1);
ev->mode = mode;
ecore_event_add(E_EVENT_POWERSAVE_UPDATE, ev, _e_powersave_event_update_free, NULL);
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
_e_powersave_mode_eval();
}
EAPI E_Powersave_Mode
e_powersave_mode_min_get(void)
{
return powersave_mode_min;
}
EAPI E_Powersave_Mode
e_powersave_mode_max_get(void)
{
return powersave_mode_max;
}
EAPI E_Powersave_Mode
e_powersave_mode_get(void)
{
return powersave_mode;
}
/* local subsystem functions */
static Eina_Bool
_e_powersave_cb_deferred_timer(void *data __UNUSED__)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
E_Powersave_Deferred_Action *pa;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
walking_deferred_actions++;
EINA_LIST_FREE(deferred_actions, pa)
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
{
if (!pa->delete_me) pa->func((void *)pa->data);
free(pa);
}
walking_deferred_actions--;
if (!deferred_actions) deferred_timer = NULL;
return ECORE_CALLBACK_CANCEL;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
static void
_e_powersave_mode_eval(void)
{
double t = 0.0;
switch (powersave_mode)
{
Fix common misspellings Some misspellings were manually reverted since in E there are tons of .po with phrases in other languages. Other than that all the changes in the following files were reverted: * src/modules/illume/dicts/English_(US).dic * src/modules/illume-keyboard/dicts/English_(US).dic Following misspellings were fixed: acquited->acquitted adres->address adress->address alreayd->already aquire->acquire arbitarily->arbitrarily cant->can't Capetown->Cape carefull->careful causalities->casualties Celcius->Celsius certian->certain commandoes->commandos considerd->considered conveyer->conveyor dependant->dependent didnt->didn't discontentment->discontent doesnt->doesn't everytime->every exemple->example existance->existence existant->existent existince->existence Farenheit->Fahrenheit forbad->forbade funguses->fungi guage->gauge guerilla->guerrilla guerillas->guerrillas happend->happened hasnt->hasn't heros->heroes inbetween->between independant->independent inital->initial intrusted->entrusted irregardless->regardless isnt->isn't knifes->knives layed->laid loosing->losing marrage->marriage midwifes->midwives miniscule->minuscule monickers->monikers mroe->more noone->no one occured->occurred omre->more paralell->parallel payed->paid planed->planned quitted->quit quizes->quizzes seperated->separated seperate->separate shoudl->should similiar->similar simplier->simpler specifiying->specifying teh->the toke->took torpedos->torpedoes Tuscon->Tucson unecessary->unnecessary useage->usage usefull->useful useing->using waht->what wanna->want whith->with wich->which withing->within SVN revision: 52006
2010-09-08 16:59:07 -07:00
/* FIXME: these values are hardcoded - should be configurable */
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
case E_POWERSAVE_MODE_NONE:
t = 0.25; /* time to defer "power expensive" activities */
break;
case E_POWERSAVE_MODE_LOW:
t = 5.0;
break;
case E_POWERSAVE_MODE_MEDIUM:
t = 60.0;
break;
case E_POWERSAVE_MODE_HIGH:
t = 300.0;
break;
case E_POWERSAVE_MODE_EXTREME:
t = 1200.0;
break;
default:
return;
break;
}
if (t != defer_time)
{
if (deferred_timer) ecore_timer_del(deferred_timer);
deferred_timer = ecore_timer_add(defer_time,
_e_powersave_cb_deferred_timer,
NULL);
defer_time = t;
e: 1. configure/build changes to allow cross-compiling painlessly 2. pager module namespace changes - this was still dirty afdter the namespace cleanup, so clean it up 3. add a powersave subsystem - doesnt have an "automatic" way to turn on and off right now, this i think is best provided by modules (that do things like monitor acpi status's (eg close lid of laptop), AC power status etc. etc. this allows e to nicely defer "power" expensive actions to avoid disk spinups etc. 4. move to use the new ecore poller system - discussed long ago as part of power management/saving issues. now it exists 5. add a canvas idle flush call that helsp cope with the new shm greedy software x11 engine stuff 6. use the new powersave subsystem where appropriate 7. fix non-zeroed/initted memory access in e_fm_main 8. fix mem leak for e menus 9. remove ipc handlers for changed/removed config values 10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps config 11. fix up timer/poll happienss of cursor idle stuff 12. remove avoid damage from popups for now - causing problems 13. change battery and temp readouts to b e shorter so they fit 14. pager can emit signals on focus change for mini-windows now 15. temperature module now uses a slave process and uses stdin/out to talk to it and get output - this makes e smoother as in my expereicne i found getting the temp on my laptop actually took like 200ms so e "hang" for 200ms while reading the acpi files - so now the subprocess does it and just writesa back to e when it gets it. ecore: 1. add ecore_pollers. see the documentation on them in doxygen comments :) 2. fix timers to only go off when they have to - bug there that made e's select time out a LOT more than it needed to. defensive coding hid the problem. now fixed. e should be much more power friendly now. 3. formatting/niceness in ecore_exe stuff 4. some comments on comments with SIGIO ideas vs. select 5. add call to be able to add an idle enterer at the start of the list of them, not just the end (as has been the default) 6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in all canvases - and to do it right 7. if argb destination - set the shape EVENT shape (to mask out events in transparent regions much like shape does withotu translucency) 8. in ecore_x add support for the event shape evas: 1. fix cache to work properly and not just always fill up (as it seemed to like to think cahce useage dropped below 0 when it didnt and thus just over-fill) 2. software x11 engine now ONLY uses shm segments - no ximages over the socket. this ximage hack was there to avoid the 2 round trips involved in setting up an shm image - now i mitigated that wih an shm image cache pool. it keeps shm images around and repurposes them for new update regions if appropriate. this means many fewer shm creates (about 1/100th the number) and since we recycle the memory less 0 memory page filling by the kernel - in the end, i recorded about a 10-20% speedup over the old software x11 engine. simple tests i have seen up to 120% speedups. idle flush now does something - it frees all the cached shm segments. it has a hard-coded limit of 4mb worth of shm segments (or 32 segments - whichever comes first) to keep around. once can never complain much about speedups methinks :). also evas will defer sync until the NEXT frame is written - this means evas can calculate the next frame of data while x dma's/copies the images to the screen at the same time (if you hve a dual core or multi-cpu machnike or your xserver is able to use DMA to copy image data to the screen/video ram then this should see a decent speedup). SVN revision: 33448
2008-01-10 23:33:57 -08:00
}
}
static void
_e_powersave_event_update_free(void *data __UNUSED__, void *event)
{
free(event);
}