so if you closed the lid ANd didn't have external screens ANd had ac
plugged in ... e would suspend even if youdidn't have "suspend on ac"
checked in blanking dialog. respect this and handle it properly.
@fix
side note... i've notced acpid no longer reporting lid events on one
of my systems. this is very sucky. you now have to open
/dev/input/event2 (this may vary from device to device) to get lid
events... it's an input device. this means elput needs to start doing
this as we cant get power button or lid events anymore .... and we may
have to do this for x11 too.
i could have sworn i added this... i swear i remember adding the fd
get line... how did it not make it? this is odd. well add it and fix
my spining cpu issue after moving to select to fix pipe wait not being
threadsafe.
so new laptops now seem to no longer support S3 sleep. sleeping is
done basically by going as idle as possible. you can ask the kernel to
freeze execution BUT this seems to use about the same power as staying
alive in my tests. to support this add 2 things:
1. a FREEZE powersave mode which implies we're alive but want to
really stay as idle as absolutely possible.
2. powersave aware sleep functions that replace the usleeps in threads
so they can switch from being super sleepy when in freeze mode to
normal.
So yeah, I've literally used sed to replace every occurrence of
ecore_time_add() with ecore_timer_loop_add() because I'm reasonably
confident that no part of E has a legitimate need for timer based on the
exact current time.
It would be really nice if I'm not wrong. :)
The reason for this is the incredible spew of clock_gettime() calls I'm
seeing on an ARM system (that should have a vdso for gettime, but...)
This can amount to thousands of system calls per second.
#YOLO
Do not abuse the concept of e_*_init(), make them call-once and those
that needed multiple call are renamed to e_*_update(). To make sure
convert them to EINTERN so the symbols are not exported.
Actually I guess too much is exported as EAPI while they should be
EINTERN, but that would require manual investigation, while this patch
was basically created with sed + grep.
SVN revision: 54795
* Remove vim modelines:
find . -name '*.[chx]' -exec sed -i '/\/\*$/ {N;N;/ \* vim:ts/d}' \{\} \;
find . -name '*.[chx]' -exec sed -i '/\/[\*\/] *vim:/d' \{\} \;
* Remove leading blank lines:
find . -name '*.[cxh]' -exec sed -i '/./,$!d'
If you use vim, use this in your .vimrc:
set ts=8 sw=3 sts=8 expandtab cino=>5n-3f0^-2{2(0W1st0
SVN revision: 50816
1. configure/build changes to allow cross-compiling painlessly
2. pager module namespace changes - this was still dirty afdter the namespace
cleanup, so clean it up
3. add a powersave subsystem - doesnt have an "automatic" way to turn on and
off right now, this i think is best provided by modules (that do things like
monitor acpi status's (eg close lid of laptop), AC power status etc. etc.
this allows e to nicely defer "power" expensive actions to avoid disk
spinups etc.
4. move to use the new ecore poller system - discussed long ago as part of
power management/saving issues. now it exists
5. add a canvas idle flush call that helsp cope with the new shm greedy
software x11 engine stuff
6. use the new powersave subsystem where appropriate
7. fix non-zeroed/initted memory access in e_fm_main
8. fix mem leak for e menus
9. remove ipc handlers for changed/removed config values
10. use animaotr not timer for menu scrolls - then menu scrolls obey the fps
config
11. fix up timer/poll happienss of cursor idle stuff
12. remove avoid damage from popups for now - causing problems
13. change battery and temp readouts to b e shorter so they fit
14. pager can emit signals on focus change for mini-windows now
15. temperature module now uses a slave process and uses stdin/out to talk to
it and get output - this makes e smoother as in my expereicne i found getting
the temp on my laptop actually took like 200ms so e "hang" for 200ms while
reading the acpi files - so now the subprocess does it and just writesa back
to e when it gets it.
ecore:
1. add ecore_pollers. see the documentation on them in doxygen comments :)
2. fix timers to only go off when they have to - bug there that made e's
select time out a LOT more than it needed to. defensive coding hid the
problem. now fixed. e should be much more power friendly now.
3. formatting/niceness in ecore_exe stuff
4. some comments on comments with SIGIO ideas vs. select
5. add call to be able to add an idle enterer at the start of the list of
them, not just the end (as has been the default)
6. fix ecore_evas to support auto evas idler calls after 0.5 secs of idle in
all canvases - and to do it right
7. if argb destination - set the shape EVENT shape (to mask out events in
transparent regions much like shape does withotu translucency)
8. in ecore_x add support for the event shape
evas:
1. fix cache to work properly and not just always fill up (as it seemed to
like to think cahce useage dropped below 0 when it didnt and thus just
over-fill)
2. software x11 engine now ONLY uses shm segments - no ximages over the
socket. this ximage hack was there to avoid the 2 round trips involved in
setting up an shm image - now i mitigated that wih an shm image cache pool.
it keeps shm images around and repurposes them for new update regions if
appropriate. this means many fewer shm creates (about 1/100th the number) and
since we recycle the memory less 0 memory page filling by the kernel - in the
end, i recorded about a 10-20% speedup over the old software x11 engine.
simple tests i have seen up to 120% speedups. idle flush now does something -
it frees all the cached shm segments. it has a hard-coded limit of 4mb worth
of shm segments (or 32 segments - whichever comes first) to keep around. once
can never complain much about speedups methinks :). also evas will defer sync
until the NEXT frame is written - this means evas can calculate the next
frame of data while x dma's/copies the images to the screen at the same time
(if you hve a dual core or multi-cpu machnike or your xserver is able to use
DMA to copy image data to the screen/video ram then this should see a decent
speedup).
SVN revision: 33448
Carsten Haitzler
Mike Blumenkrantz
Derek Foreman
Chris Michael
Mike Blumenkrantz
Vincent Torri
Cedric BAIL
Michael BOUCHAUD
Gustavo Sverzut Barbieri
Lucas De Marchi
Christopher Michael
Sebastian Dransfeld
Viktor Kojouharov