Mike Blumenkrantz
d9792a7777
improve randr rotate snapping calculations
...
SVN revision: 79815
2012-11-29 06:59:29 +00:00
Christopher Michael
e5a6beaa9e
Also show refresh rate in the popup menu.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 79450
2012-11-19 13:19:06 +00:00
Mike Blumenkrantz
e5903f4740
add support for and use eina_list_last_data_get
...
SVN revision: 79144
2012-11-12 10:05:09 +00:00
Christopher Michael
461c733145
E (RandR): Use a "normal" resolution (640x480) not (640x640).
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 78187
2012-10-18 12:59:44 +00:00
Carsten Haitzler
c824b1a1e1
fix segv's in randr dialog. :)
...
SVN revision: 77943
2012-10-13 03:18:58 +00:00
Christopher Michael
44a95f2797
E (RandR): Add function to 'reset' a monitor's changes. This is used
...
after any user modifications have been applied so that we an reset the
'original' values to the 'currently applied' values. This helps to
keep the Apply button in sync.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77890
2012-10-11 14:29:17 +00:00
Christopher Michael
79339fb431
E (RandR): Remove dead code lines.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77887
2012-10-11 14:29:07 +00:00
Christopher Michael
1756c3de92
E (RandR): Remove dead comment.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77886
2012-10-11 14:29:04 +00:00
Christopher Michael
e0bb649b07
E (RandR): Reduce potential variable usage in geometry_get function.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77885
2012-10-11 14:29:01 +00:00
Christopher Michael
931a9f4d05
E (RandR): Remove dead code line.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77884
2012-10-11 14:28:58 +00:00
Christopher Michael
24d5040564
E (RandR): If we have a crtc when getting monitor geometry, then use
...
that for width & height.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77883
2012-10-11 14:28:51 +00:00
Christopher Michael
62644089e9
E (RandR): Setup defaults before we assign output & crtc.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77882
2012-10-11 13:51:39 +00:00
Christopher Michael
bc3d8d18e2
E (RandR): Fix case where a disabled monitor would show up with no
...
mode, or size.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77879
2012-10-11 13:01:04 +00:00
Christopher Michael
33952ef188
E (RandR): Remove dead debug code.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77876
2012-10-11 12:49:44 +00:00
Christopher Michael
71eeb7c458
E (RandR): Whitespace removal.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77871
2012-10-11 12:42:31 +00:00
Christopher Michael
e005f0d4bf
E (RandR): Add some internal functions to reduce duplicated code
...
(background set, modes_fill, etc.
Add structure to smart_data so we can store original values and
current values. This allows us to selectively apply changes.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77870
2012-10-11 12:42:29 +00:00
Christopher Michael
23fb072172
E (RandR): Add function to retrieve monitor's output.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77867
2012-10-11 12:42:20 +00:00
Christopher Michael
01edd96d74
E (RandR): Fix issue where disabled monitors would not show up
...
correctly.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77761
2012-10-10 12:59:56 +00:00
Christopher Michael
18432a087c
E (RandR): Add checks for current_mode being valid.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77747
2012-10-10 10:31:17 +00:00
Christopher Michael
9fa4848a0e
E (RandR): Don't segfault if no current_mode is set for a monitor.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77746
2012-10-10 10:29:09 +00:00
Christopher Michael
596d53e06a
E (RandR): Limit size of livethumb to be the maximum canvas size of
...
the monitor object. (should reduce memory footprint for randr dialog).
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77744
2012-10-10 10:23:33 +00:00
Christopher Michael
fed73888f6
E (RandR): Make sure we have hTotal and vTotal from the mode before
...
trying to calculate refresh rate.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77743
2012-10-10 10:10:25 +00:00
Christopher Michael
5d376283c9
E (RandR): Ooops, remove unused variable.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77726
2012-10-10 08:46:07 +00:00
Christopher Michael
3db9434a48
E (RandR): When we search for a resolution, if we did not find one
...
which matched the existing refresh rate, then search again but do not
take refresh rate into account.
NB: Should fix Raster's "resolution not changing" problem.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77724
2012-10-10 08:45:00 +00:00
Christopher Michael
136cc5035a
E (RandR): Add function & prototype to return if a monitor has been
...
changed.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77714
2012-10-10 07:55:11 +00:00
Christopher Michael
5347a339b3
E (RandR): Actually, let's readd the changed flag so we can skip a
...
monitor during Apply if it has not changed.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77713
2012-10-10 07:55:08 +00:00
Christopher Michael
8b5d261d50
E (RandR): Remove dead code.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77712
2012-10-10 07:55:06 +00:00
Christopher Michael
c646c7de26
E (RandR): Add function to return monitor's connected state.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77709
2012-10-10 07:54:57 +00:00
Christopher Michael
47977be1ca
E (RandR): Use output->monitor first to get resolutions (if it exists), then
...
fallback to output->crtc common modes if needed.
No need to drop duplicate resolutions anymore, in fact we should list
them due to different refresh rates.
Add functions to smart monitor object for getting position,
orientation, and mode info.
When searching for a resolution within snapping fuzziness, also try to
find one which matches the current refresh rate.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77690
2012-10-10 06:20:33 +00:00
Christopher Michael
23e171b7b7
Actually, use the real rate value from the mode. This allows similar
...
modes with the same rate to correctly select the proper radio.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77642
2012-10-09 12:15:09 +00:00
Christopher Michael
51fa6fc413
Add method to list/select refresh rates.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77639
2012-10-09 11:55:40 +00:00
Christopher Michael
6cca89c83f
Make on/off indicator toggling also send a changed event to the RandR
...
widget.
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77570
2012-10-08 09:13:30 +00:00
Christopher Michael
1405f6f949
Remove 'changed' flag for monitor smart object.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77568
2012-10-08 08:39:43 +00:00
Christopher Michael
2dcd1bc3ba
Make RandR dialog function as a Config Dialog.
...
Signed-off-by: Christopher Michael <cp.michael@samsung.com>
SVN revision: 77565
2012-10-08 07:56:18 +00:00
Mike McCormack
5b4a058e44
e: Fix warning
...
e_smart_monitor.c:1036:29: warning: ‘mode’ may be used uninitialized in this function
Signed-off-by: Mike McCormack <mikem@atratus.org>
SVN revision: 77427
2012-10-04 11:47:43 +00:00
Christopher Michael
0f5cd63f5a
E (RandR): Add function to return if a specific monitor is moving. Add
...
function to "reposition" a monitor when move is finished. Implement
basic monitor moving (still has some issues tho).
SVN revision: 77367
2012-10-03 12:03:00 +00:00
Mike McCormack
ee8f7529bc
e: Fix warnings
...
Signed-off-by: Mike McCormack <mikem@atratus.org>
SVN revision: 77304
2012-10-02 11:21:17 +00:00
Christopher Michael
6e3110b57b
E (RandR): Fix corner cases for rotation not working. Fix rotation &
...
resize snapping. Oh, and implement a new feature: Resizing a monitor
While it is rotated in a different position ;)
NB: Next thing is actual Movement snapping, then on to saving config ;)
SVN revision: 77303
2012-10-02 11:20:12 +00:00
Christopher Michael
d6e1350427
E (RandR): And get the proper mode based on rotation also so that
...
resize limiting functions propertly.
SVN revision: 77294
2012-10-02 08:58:16 +00:00
Christopher Michael
d445520629
E (RandR): When we are finished resizing, we need to get geometry
...
based on the current rotation so we can find the proper mode.
SVN revision: 77292
2012-10-02 08:51:50 +00:00
Christopher Michael
3b7b05abf0
E (RandR): Populate the map using 'full' so that we account for any
...
existing rotation of the monitor object.
SVN revision: 77288
2012-10-02 08:47:34 +00:00
Christopher Michael
8d84c6e9cc
E (RandR): Remove start_rotation from structure (not needed). Remove
...
some unused variables.
SVN revision: 77287
2012-10-02 08:40:14 +00:00
Christopher Michael
0ab246155d
E (RandR): Use e_layout_child_geometry_get for rotate snap.
...
SVN revision: 77275
2012-10-01 14:22:51 +00:00
Christopher Michael
4f02f86438
E (Randr): Delete the menu on object deletion.
...
SVN revision: 77274
2012-10-01 14:19:52 +00:00
Christopher Michael
d905aa1cc9
E (RandR): Use e_layout_child_geometry_get so that e_layout is kept in
...
sync.
SVN revision: 77270
2012-10-01 13:29:16 +00:00
Christopher Michael
16524abd60
E (RandR): Use e_layout_child_resize when doing rotation so that if
...
you try a Move after a Rotation is set, the move will actually move
the with a proper rotation now.
SVN revision: 77269
2012-10-01 13:19:43 +00:00
Christopher Michael
715048c75e
E (RandR): Fix some weird rotation bug where the monitor would Jump to
...
a previous rotation when you started a rotate operation. Also, Fix up
a couple of functions to be more accurate (in terms of their name &
purpose).
SVN revision: 77267
2012-10-01 12:33:06 +00:00
Christopher Michael
0ae612a055
E (RandR): Don't need the "snapped" field in this structure anymore.
...
SVN revision: 77266
2012-10-01 11:43:41 +00:00
Christopher Michael
54984d38ef
E (RandR): Reimplement "resizing other monitors" when a specific
...
monitor gets resized, so that we update the visual layout
appropriately. Also, do not raise "monitor_moved" callback for every
little move, rather wait until the move is finished and raise the
callback once.
NB: The "monitor_moved" callback frequency may change in the future.
SVN revision: 77265
2012-10-01 11:37:41 +00:00
Christopher Michael
12e76211d4
E (RandR): For now, do not raise "resized" signal with every movement,
...
just raise it once when it snaps to the closest resolution.
NB: This may change in the future but for now, let's keep the number
of callbacks down.
SVN revision: 77263
2012-10-01 10:33:32 +00:00