Summary:
Well, the build is broken again on BSD and Windows.
efl_debugd is full of lots lovely Linuxisms. Just
don't compile.
This unbreaks the build for FreeBSD and others.
Reviewers: cedric, raster, jpeg
Reviewed By: jpeg
Subscribers: JackDanielZ, jpeg
Differential Revision: https://phab.enlightenment.org/D4946
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
If we receive bad crtc info from libdrm, then we could end up with a
SIGFPE here due to division by zero if info h/v total are not set.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
This patch adds a new API function which can be used to swap x & y
pointer axis and invert them according to rotation angle. Mouse input
events occur according to canvas coordinates so this can be used when
a canvas is rotated.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Small patch which adds an API function that can be called to swap x
and y axis and invert them according to rotation angle.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary:
This patch partially reverts D2951.
_edje_entry_imf_retrieve_surrounding_cb() function has to pass
whole text nearby the entry's cursor. If IMF needs to ignore
selected text when the entry has selection, IMF can check
selected text by calling _edje_entry_imf_retrieve_selection_cb().
So, we don't need remove selected text before passing it to IMF.
@fix
Test Plan: N/A
Reviewers: woohyun, jihoon, subodh6129
Reviewed By: subodh6129
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4321
This patch adds support for map with more than 4 points.
However, we only support points with multiples of 4.
This also adds efl_gfx_map_point_count_set/get APIs to
set number of points.
@feature
Summary:
- elm_panel has a property named hidden which stores
open/close status.
- This is updated when:
1. bring_in animation is done(anim_stop_cb).
2. mouse_up on panel.
3. API is called. (elm_panel_toggle, elm_panel_hidden_set)
- In case 3, API changes hidden, and starts bring_in animation
which will call anim_stop_cb() which will update hidden again.
- If bring_in animation is canceled (eg: sizing_eval),
anim_stop_cb will be called and calculate hidden status
which will not guarantee updated hidden state by APIs.
Test Plan:
1. Call any APIs which will call elm_layout_sizing_eval(panel)
right after calling elm_panel_toggle()/elm_panel_hidden_set().
2. Delete content of panel during "toggled" cb.
Reviewers: jpeg, eunue, cedric
Subscribers: conr2d, cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4704
Signed-off-by: Jean-Philippe Andre <jp.andre@samsung.com>
2 more. /etc/X11/rgb.txt /usr/share/vim/vim80/rgb.txt ...what i do notice
is that this file seems to have vanished from modern systems... so we'll have
lots of un-fun loading old xpm's with colornames if we cant figure out what
color names map to what colors...
If/When we exit _evas_outbuf_egl_setup function, we should be freeing
the allocated cfgs variable else we leak it.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
When calculating output dpi, we should also be considering output
height in the calculation.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Small patch to add an API function which can be called to set a buffer
transformation on a given window.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Small patch to add a new API function that can be used to retrieve the
current transform value for a given output.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Small patch which adds an API function that can be used to find the
output where a given window resides.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Some servers may need to do special animations or other effects when
an output transformation happens, so raise an event in the output
geometry callback when this happens.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
As we won't get a request from a server to raise a window which is not
visible anyway, this check is useless.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary:
Problem that scroller is not mirrored in RTL mode has been fixed in D4908.
However, I found a problem in init process.
I will revert D4908 commit(https://phab.enlightenment.org/D4908).
After edje_obj is initialized, mirrored_set is called.
When wanted_region_set is called, x-coordinate flip normally and acts as RTL.
Test Plan: scroller test on elementary_test.
Reviewers: raster, woohyun, SanghyeonLee, akanad, eagleeye, cedric, singh.amitesh, eunue
Subscribers: jpeg, cedric
Differential Revision: https://phab.enlightenment.org/D4944
See also eb27724eb9 which didn't fix
the reported issue. Not quite sure yet how to implement those
lock & modifiers for fake events (i.e. artificially created
by the app itself).
Fixes T5510
Summary:
This reverts commit de313d6296.
Because x-coordination mirroring is called properly from wanted_regison_set.
There was a problem in scroller init process.
Before edje_obj was initialize in elm_interface_scrollable_objects_set, mirrored_set was being called.
So Move mirrored_set after elm_interface_scrollable_objects_set
it can fix this issue(https://phab.enlightenment.org/D4944)
Reviewers: raster, woohyun, SanghyeonLee, akanad, eagleeye, cedric, singh.amitesh, eunue
Subscribers: jpeg, cedric
Differential Revision: https://phab.enlightenment.org/D4945
Summary: I had fixed some typos and wrong expressions, such as capital letters, $simbols in .eo and singulars in Ecore, Ecore_Audio, Ecore_Cocoa, Ecore_Con, and Ector API reference doxygen.
Test Plan: Doxygen Revision
Reviewers: Jaehyun_Cho, stefan, jpeg, cedric, raster
Reviewed By: Jaehyun_Cho
Differential Revision: https://phab.enlightenment.org/D4943
This was initially an experiment in trying to use Atomic properties to
set dpms on/off, however it does not turn off backlight support when
triggered so it is useless.
Fixes T5462
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
When we go to set output backlight level we use doubles, so lets just
store these values as doubles in the structure.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Small patch to add an internal function which can be used to retrieve
backlight values on output creation.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
This was skipping the error path on failure and setting some state as if
it was successful. Then the next attempt at a page flip was actually
setting this state.
So _output_dpms_atomic_set (which has always been broken) wasn't actually
the function that successfully disabled dpms.
This is confounding attempts to debug why dpms isn't coming back on
properly.
Now it won't turn *off* either, because it really never should have.
Ref T5462
Summary:
Fixes that a scroller can not be moved normally even if it is changed to mirrored.
In elm_scroller, _mirrored_set is called when sizing_eval is called. because
When content size is changed, it should be scrolled based on mirrored coordinates.
Also In elm_interface_scrollable,
elm_interface_scrollable_content_pos_set of _elm_scrollable_mirrored_set
to be called regardless of mirrored state.
Test Plan: scroller test on elementary_test.
Reviewers: raster, woohyun, SanghyeonLee, akanad, eagleeye, cedric, singh.amitesh, eunue
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4908
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
Reason for role change:
MBE items do not act like push buttons, they need to maintain their status and at a time only one item can be selected, they act like radio buttons.
Role change of MBE from entry to panel, because MBE is just a container and entry is one of the children, when entry gets access frame, it will work as how entry works, but making MBE role as entry does not work as expected and also MBE should not receive highlight as a whole but only its children should receive highlight one more reason why MBE role cannot be entry.
state_set_get API added to get items state.
Test Plan:
When atspi mode is enabled the access frame has to
navigate directly on item and not on MBE as a whole and state has to
be read out
Reviewers: kimcinoo, cedric
Reviewed By: cedric
Subscribers: cedric, govi, rajeshps, jpeg
Differential Revision: https://phab.enlightenment.org/D4925
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
When password mode is changed, the change has to reflect on already running
apps as well. config_sub_apply will not be called for an already running app.
Test Plan:
1. 2 running process
2. Change the config value of password last show in one process
3. Check whether the change has reflected in previous process.
Signed-off By: Shilpa Singh<shilpa.singh@samsung.com>
Reviewers: jpeg, cedric, thiepha
Subscribers: govi, rajeshps
Differential Revision: https://phab.enlightenment.org/D4916
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
GCC has started introducing a detection for series of case in a switch statement
without break for each case. We do use that trick a lot to reduce our code base.
Even if in most case we have documented this so that people using coverity don't
try to fix it. Now with GCC we need to silence it properly to avoid future
problem.
Summary:
This is the most basic of the Evas examples and serves as the starting
point for new Evas users. Since this targets neophytes, we can afford
to be much more detailed in commentary.
Reviewers: cedric
Subscribers: jpeg
Differential Revision: https://phab.enlightenment.org/D4904
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
Categorize the examples by topic, and identify certain examples as
introductory; these can be commented more verbosely than the other
examples.
Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewers: cedric
Reviewed By: cedric
Subscribers: jpeg
Differential Revision: https://phab.enlightenment.org/D4903
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
Wordsmith phrasings to be a bit more concise. In example code,
distinguish better between the OOM and Low Mem conditions that it
is demonstrating.
Reviewers: cedric
Subscribers: jpeg
Differential Revision: https://phab.enlightenment.org/D4898
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
If popup scrollable change from FALSE to TRUE after content or text is added,
content_area is deleted, so it cause null pointer problem.
main_layout has content_area in its CONTENT_PART, but in scrollable_set API,
tbl set into main_layout's CONTENT_PART, so content_area is deleted.
On the contrary, if scrollable change to FALSE,
content object in content_area is deleted, because tbl set into content_area's CONTENT_PART.
So if some object set into other object,
unset previous object and set it into properly part after that.
A case using item_append should be fixed by other patch.
@fix
Test Plan: Change scrollable repeatedly after adding content or text to popup.
Reviewers: jpeg, singh.amitesh, conr2d, cedric, raster
Reviewed By: cedric
Subscribers: herb
Differential Revision: https://phab.enlightenment.org/D4894
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
_ecore_evas_wl_common_new_internal() creates both wayland_egl and
wayland_shm backed windows, so reporting that the failure was in looking
up "Wayland_Shm" could be misleading.
Also, this routine can be called with any arbitrary string as
engine_name, so including what was received in the error message might
be helpful for diagnosing bugs.
Reviewers: cedric
Reviewed By: cedric
Subscribers: jpeg
Differential Revision: https://phab.enlightenment.org/D4897
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary:
The API was not working because of an internal logical error.
@fix
Test Plan: Calling elm_calendar_interval_set API in elementary_test.
Reviewers: jpeg, cedric, Hermet, woohyun
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4891
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Summary: Added a new api to send the mime type of entry to IME.
Test Plan: Tested in Tizen device
Reviewers: woohyun, id213sin, jihoon, cedric
Reviewed By: cedric
Subscribers: cedric, jihoon, jpeg
Differential Revision: https://phab.enlightenment.org/D4929
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Well, the build is broken again on macOS :(
efl_debugd is full of platform-specific code: network and epoll.
To make it compile (not work as expected, just compile), we would need
to comment out most of efl_debugd's code. So instead of having a
crippled, useless binary, just don't compile it on macOS.
This unbreaks the build for macOS.
Eina Debug is a layer aimed to bring a way to debug EFL applications by
providing a transport channel between a debug tool and the applications
of a device.
In order to be interrupted by EFL core as less as possible, the communication
is done in a separated thread.
The Ecore loop is not used there, as well as the Ecore helpers (socket...).
Debugging operations can be registered easily by any layer of the application.
To use it:
- Launch efl_debugd
- Launch the application to debug
- Launch Clouseau (the new version will be pushed soon) or another debug tool
supporting Eina Debug
The client structure was not deleted when the connected application was
suddenly terminated (ctrl-c).
It was not happening before, so I suspect TCP and UNIX sockets behave
differently on this matter.
Eina Debug is a new layer aimed for EFL debugging. It offers scalability
by allowing registration of operations not specific to EFL core.
The protocol is simple and the APIs try to provide as much
functionalities/freedom as possible.
The expected usage is efl_text_set(efl_part(layout, part), text);
Same for text_get.
Also, added an example how to make API easier with providing
efl_text_set/get for the widget itself, in efl_ui_button. Please see
this example.
Summary:
Item: state_set_get, name, actions api added
Widget: children_get api added.
Test Plan:
In Accessibility mode, on item tap, color name should be read out,
and if the color is a selected color, state also should be read out.
Reviewers: kimcinoo
Subscribers: cedric, jpeg, govi, rajeshps
Differential Revision: https://phab.enlightenment.org/D4934
The internal logic should be improved further in the future to synchronize itself
with loop wake up whenever possible (Especially true for the high frequency poller).
Summary:
Coverity reports an error "Calling "xkb_keysym_to_utf8" without checking
return value (as is done elsewhere 4 out of 5 times)."
fixes: cid1375673
Reviewers: zmike
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4936
in some cases, pulse events trigger spawning another pulse instance, and
the environment at this time is used to determine whether to attempt an
x11 connection
fix T2599
@fix
This is a quick and harmless hack to make sure we don't come back to a
dead compositor on a vc switch.
A proper fix will follow eventually, I promise.
Really. Would I lie?
We get this callback after we've lost the drm device to logind, so
deactivating stuff here will just generate a lot of ERR messages
and break our internal book-keeping.
Instead, we just turn on DPMS on session activation instead of trying
to go through the output enable path (that will bail if it's already
enabled)
This could potentially result in a display that's enabled and DPMS
off being switched back on during session activation - if that's a real
problem we can restore the previous dpms state instead...
@fix T5483
We need to set output->enabled to disabled *after* dpms takes place or set
it to enabled *before* dpms takes place. We can't just set it at the
start of the function or one of enable/disable will hit the dpms path
with a disabled display.
Give back all buffers, and do it through the release mechanism that can
fire a callback into the engine.
Previously we just leaked one and left the rest.
Summary:
object_mirroed_set as opposed to config_mirrored_set doesn't work with
popup. This patch broadcasts a change on 'mirrored' to internal notify,
main layout, scroller and action area layout to make API work.
@fix
Reviewers: singh.amitesh, jpeg, conr2d, cedric, raster
Reviewed By: conr2d
Subscribers: herb
Differential Revision: https://phab.enlightenment.org/D4900
Since this was moved into the two genlist and gengrid files I get
redefinition warnings during the build and when generating the docs
eolian actually errors out on me and stops parsing.
elm_widget_theme_object_get now return Elm_Theme_Apply enum not bools.
only ELM_THEME_APPLY_FAILED case, need to re-apply default item edje.
Signed-off-by: SangHyeon Lee <sh10233.lee@samsung.com>
COMMIT_CONTENT is called when the input method commits content such as an image.
Change-Id: Idf238dc9b27811999b1ee733eeba2318d57e54f1
Signed-off-by: Jihoon Kim <jihoon48.kim@samsung.com>
We're supposed to query the path for a session id instead of just
making up the string ourselves.
Fixes all input devices being dead after a vc switch for some users.
This introduces the new interface Efl.Ui.Base, intended to
share some APIs between Edje and Elm:
- mirrored (rtl)
- language
- scale
base_scale remains in Edje.Object for now. I don't think it
applies to generic widgets.
The new interface uses eo prefix "efl_ui". It could be renamed
as Efl.Ui (no Base), or anything else. As always, I'm open to
propositions!
Ref T5315
This size hint is only used by naviframe, which is not part of
our EO widgets. I also believe it might be an even more confusing
hint than the others.
I kept the typedef as is in Evas_Legacy.h in case an app is
written using EFL_GFX_ instead of EVAS_...
This changes a few method names:
- freeze -> calc_freeze
- thaw -> calc_thaw
- update_hints -> calc_update_hints
Otherwise this is mostly about reshuffling the EO file itself
and changing documentation.
Ref T5315
Still not happy with the name. I'm trying to avoid a name
clash between other "data" elements in the object. This is
the EDC group "data item".
Ref T5315
Those classes are simply badly named, and I've come to realize since
that part class definitions are not internal, but instead they are
part of the public API. They are required for documentation, casting,
etc... I will rename them to "part" instead of "internal" later.
Since the headers are included in Edje_Eo.h not installing them
broke the build of any external app. Sorry for the mess!
This reverts 665856027d
Ref T5306
As Dave pointed out, those are meant for internal use by Edje and
the plugins implementation, rather than for apps. This removes
ugly and complex code. Makes me happy :)
Note that I've kept the composition for now. We can remove it
as efl_content_get() must work on the part handle anyway. But it
can be used as a quick solution.
This moves all part_drag APIs to legacy and implements them for
EO using efl_part(). All parts now support these APIs, even if
they are not draggable. Making this more fine grained would
probably be much extra work for little gain.
This creates a new interface Efl.Ui.Drag.
Summary:
Other widgets remove previous object when setting new content, but popup does
nothing for the part whose name is "default".
content_unset can be used to keep previous content object, so content_set
(especially with NULL) should be able to delete previous content object
for uniformity of the entire widgets.
@fix
Reviewers: jpeg, singh.amitesh, cedric, raster, conr2d
Reviewed By: conr2d
Subscribers: minkyu, herb
Differential Revision: https://phab.enlightenment.org/D4885
If atomic support is not enabled (kernel or env var), then we will not
be filling output plane_states, so no need to free them (if non-atomic).
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Units are Eolian files (eo/eot). Each unit contains information
about its class, dependencies, variables and types. This allows
for saner checking to be done.
If atomic support is disabled (via kernel or env var), then we do not
need to fill device atomic state as it will not be used anyway.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
If atomic support is not enabled (kernel or env var), then we should
not be filling in output atomic state
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
This 'return' statement here is just useless as the code can fall
through and the function will return 0 anwyay.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Summary:
fix wrong initial value for ELM_PHOTOCAM_ZOOM_MODE_AUTO_FILL mode
@fix
Test Plan:
1. set zoom mode of photocam to ELM_PHOTOCAM_ZOOM_MODE_AUTO_FILL in text_photocam.c example
2. run elementary_test -to photocam
3. check it is working well
Reviewers: jpeg, cedric, raster, Hermet, singh.amitesh
Reviewed By: singh.amitesh
Differential Revision: https://phab.enlightenment.org/D4921
Summary:
map_surface does not redraw in below case.
1) parent and child are smart object and has map.
3) drawing objects.
4) apply new map to child object.
Test Plan: sample code
Reviewers: jpeg, cedric, jypark
Differential Revision: https://phab.enlightenment.org/D4889
Summary:
If multi selection have 0 column and delete the selection, 0 + 1 column also
deleted
This fix that bug.
Also, remove needless code.
Test Plan:
1. select multi line with 0 column.
2. delete the selection
Reviewers: ajwillia.ms
Reviewed By: ajwillia.ms
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4922
This implements edje_object_part_external_object_get() using
efl_content_get() on the part object. Note that there are now
two ways to call APIs on the external part:
- direct call to the efl_part() as if it was the object itself
(implemented by composition),
- get a handle with efl_content_get(efl_part()) and manipulate
it directly (it is the real object).
Do we need this? Do we need the composition trick? Should we have
only one of those solutions implemented?
This effectively replaces edje_object_part_external_object_get
and allows all function calls except those from Efl.Object.
Is this good enough? Or do we need access to the real object?
This adds a new class: Efl.Canvas.Layout.External.
I hate this long name...
This class represents an external part, and for now only
supports param_set/get as well as param_type_get. For now
param_type_get() still returns an Edje_External_Param_Type and
not another more generic type.
TODO: enumerate choices, return object, return content
Set this env var to "300 es" to test GLSL 300 ES as shader
version. This is for brokenshakles.
Example:
export EVAS_GL_GET_PROGRAM_BINARY=0
export EVAS_GL_SHADER_GLSL_VERSION="300 es"
export ELM_ACCEL=gl
elementary_test
Changing ck_assert_ptr_nonnull() to ck_assert_ptr_ne() in order to
require "only" check >= 0.9.10. ck_assert_ptr_nonnull() was
introduced in 0.11.0. ck_assert_ptr_ne() is already used a lot
in the test suite so a recent version of check is required.
Original patch by Jinwoo Shin:
If edje has multiple levels of child group,
edje_object_message_signal_process cannot process message on
child group. To cover that, it needs to add new API which
traverses its hierarchy and process messages.
@feature
Signed-off-by: jinwoo.shin <jw0227.shin@samsung.com>
Differential Revision: https://phab.enlightenment.org/D4914
This makes it work like C++ dynamic_cast<> operator, so that
the return value will be NULL if the object is not an instance
of the given class.
In case of efl_super() we don't do it as efl_super is used A LOT
inside EFL itself (all constructors & destructors, for a start)
and efl_isa is in fact a bit expensive. efl_cast isn't really used
and is intended to be something like dynamic_cast.
For @cedric :)
This refactors even more the edje part eo internals. But now
common part APIs can easily be implemented in edje_part.c
The API now looks like:
efl_gfx_geometry_get(efl_part(edje, "part"), &x, &y, &w, &h)
1. Make internal part "real_part_set" an internal function (EO)
2. Use a common class rather than an interface:
- Cost: 1 extra call to efl_data_scope_get() as we don't have
the data inside the EO function call implementation.
- Gain: Ability to implement common code, such as part_geometry_get
Ooooh. This one might be controversial, as some apps definitely
use the function. But it is so easily abused. For our EO API
we are trying to not expose any internal object, as this prevents
us from making changes to the internal behaviour and structure.
All the features that this API provided should be limited to
read-only access to the internal object. In order to replace
this, we will have to return an Efl.Part object that implements
all those APIs: geometry_get, visibility_get, etc...
Most of the values were the same, with edje having just a couple
more error codes.
Not entirely sure the prefix Efl.Image is correct for this type.
Maybe just Efl.Load.Error?
This moves one enum from EO to legacy only (Ecore_Pos_Map).
Ideally the type should be in Ecore_Legacy and no Common, that
can be done later.
Ref T5522
The following text interfaces are added:
- Efl.Text.Font: font settings that decide which font to display in
the text
- Efl.Text.Format: formatting that affects the looks and layout of
the text
- Efl.Text.Style: decorations and overlays that shouldn't affect the
font choice or the layout
@feature
this is still semi-broken if a seat has many pointer-ish type devices since
pointer devices in ecore-evas were never correctly implemented to be 1:1 with
seat:cursor relationships
@feature
context and keymap need to be set at the same time in order to effectively
update keyboard state, and active group should be accessible through api
as well
preserve old function ABI to ensure old binaries don't crash
once this widget is visible, It should handle the focus of its children
and leave no option to the underlaying widgets to gain focus.
This is implemented by making it a redirect when it gets visible.
While the API seems to work fine, I am not 100% sure the device
names are properly assigned.
Run ecore_evas_cursor_example or ecore_evas_vnc_example and
then connect to the VNC server locally or remotely.
Fixes mouse name that was "keyboard".
This is an attempt at unifying names under X11, WL and VNC.
The default device names now look the same, namely "Keyboard"
and "Mouse". The default seat still has different names on WL
and X11 ("seat-0" and "default").
Following a remark in the mailing list, it is pretty clear that
Efl.Gfx.View.view_size is not as simple as "image_size".
I have defined this new image_size as being the size of the
image file, and not what's currently loaded. So it will not
apply to proxies, gl views, 3d scenes, etc... but only to
standard image files loaded with file_set or mmap_set.
Supported objects:
- Efl.Canvas.Image (evas image)
- Efl.Ui.Image (elm image)
- Elm.Photocam (note: still needs some interface work)
@feature
The COW object may have not been created if the object could
not be created. Example: a window failed to open because the
engine could not create a surface.
Summary: The User requires this signal to handle spinner widget easily on their app.
Test Plan: Spinner test on elementary_test.
Reviewers: cedric, jpeg, Hermet, woohyun, Jaehyun, myoungwoon, Jaehyun_Cho
Reviewed By: myoungwoon, Jaehyun_Cho
Subscribers: myoungwoon, cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4886
Since this uses generic_value (aka Eina_Value), there is an
implicit type detection and conversion. I did not attempt to
cover all types (namely string+int and string+float and even
less sets of those) as I believe they aren't really used. Or
they most likely could be replaced by multiple messages rather
than a single message.
Note: should we pass ptr(generic_value) instead of generic_value?
The API looks a little odd in C when passing by value.
@feature
It is used to receive messages with a payload from embryo to C.
This API has a function pointer, which means it would have to be
manually bound, or transformed (eg. eo event).
Also, prepare the change for message_send to use Eina_Value and
no explicit type.
This feature seems rarely used.
But note that handler_set is in fact used in terminology, rage and
luncher. So, if the need arises, it will have to be transformed in
a proper EO way.
Summary:
An else statement was added in 5ebdf8f3 with no clause, resulting in the
bg_solid property becoming conditionalized such that it won't be set
correctly when HAVE_ELEMENTARY_WL2 is defined and there is no wayland
window in use.
Further, this also causes focus to be left undefined. Since there's no
window, presumably it should be turned off in this circumstance.
fix CID1375496, CID1375497
Reviewers: zmike
Subscribers: cedric, jpeg
Differential Revision: https://phab.enlightenment.org/D4899