if systemd suspended and we hand't triggered it, and desklock on
suspend is enabled, then lock there and then because we need to. of
course you need systemd/logind... but hey... i guess without you live
with less... :) fixes logic hole
@fix
in soem cases a client has no csd and then border l/r/t/b/ are all 0
so artifically keep 1 at 1... to keep cutouts working.
still need to solve blending still being on though.
this stops crashes when e menu si still up when the dbus menu backing
it has changed/gone away... by referencing the dbusmenu to hang about
like a bad smell while the e gui menu is up until it's dismissed. this
fixes a real segv i saw with steam.
@fix
so dropping a bit of overhead/latency for e menus here - this isn't to
the extent of a cache for menu objects/items... but it's just nuking
useless calls to do things not used or that can be done in fewer calls
as well as ordering things to we don't emit events and handle them
multiple times or calc min size multiple times etc. etc. -
adds a test case we can enable for perf testing too.
found a valgrind issue and an input issue all in one... this fixes
that with no more valgrind complaints and input works if e menu is up
whilst desklock kicks in.
@fix
a few problems i found on my rpi's...
1. rpi's retun that they do NO rotations (not even the normal 0 degree
default), so assume 0 degrees if none listed. this makes screen setup
even try and configure things on these kinds of drivers/devices
2. there was a mistmatch of 0, 90, 180, 270 srtyle rotation ints vs
the enum stype ecore drm2 uses. this fixes that so it uses ecore_drm2
considtently as ecore_drm2 expects. this stops output becomeing odd.
3. also seemingly we forgot to set the max mouse region based on res.
re-enable that commented out function.
now i can change res on my rpi3 and rpi4 in wl mode and it works right...
hooray!
we never told users before. we should. this would sovle some issues
i've seen of people saying that closing the lid doesn't work with e
and they didn't install acpid (even though packages often recommend it).
this improves usability.
be both explicit in killing it off on shutdown as well as using die
with parent flags as well. this seems ot have fixed or reduced the
"system cant shut down some job still alive in some session" problem.
@fix
various errors we have are not actual errors but mostly information or
debug or status messages, so don't use ERR or just don't do the thing
that triggers it as it's useless. This leads to a less
noisy/error-like start output. cleaner for a release for sure.
so when e was e.g. shutting down the system it'd sometimes - or all
the time, restart and not shut down. this fixes that. e was being sent
a HUP signal while doing this causing e to go "ooh HUP - i shall
restart" which si what daemons without a controlling tty do with
signals commonly. this isn't what we want from e though in this case,
so delay itby a bit and ignore if we're in the process of logging
out/halting etc.
this really only affects wayland mode.
@fix
we'd have corrupted env vars with the alloca code we had to store the
env var, so always malloc it at all times. as we won't (likely) be
calling env_set() multiple times for the same environment we won't be
leaking, and at worst - not very much at all.
@fix
so a parent transient shows 2 dialogs... both are transient for the
parent. the newsewst one gets stacked below the older one. this leads
to really bad things like a new "are you sure" or "have an error"
modal dialog is not visible and things seemingly freeze in the
client... so stack them in order they are created instead. also handle
transients WITH transients of their own correctly this way too.
@fix
Summary:
This patch introduce an alternative to suspend on blank.
Hibernate on blank.
@fix T1886
@features
Reviewers: zmike!, devilhorns
Subscribers: cedric
Tags: #enlightenment-git
Maniphest Tasks: T1886
Differential Revision: https://phab.enlightenment.org/D7602
so often enough i find e_alert is hung and you have to kill it to get
e back. this ends upo exiting and logging you out. this is not good.
the defaul should be to restart not to dump you out and lose
everything. so switch these around to be more user-friendly.
on the cards is to redo e_alert to be simpler (use full efl stack) and
thus hopefulyl be reliable in wl mode etc.
Summary: On wayland there is no need for a Lost Windows option in the menu. So remove that.
Test Plan: Compile and run on wayland.
Reviewers: raster, bu5hm4n, devilhorns
Subscribers: cedric, zmike
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D8804
Summary:
This patch refactors _drm2_randr_apply inside the wl_drm module in
order to support multiple outputs and to fix issue of rotation not
working
ref T7690
Reviewers: raster, cedric
Subscribers: cedric, zmike
Tags: #efl, #do_not_merge, #enlightenment-git
Maniphest Tasks: T7690
Differential Revision: https://phab.enlightenment.org/D8117
i didn't notice, but if you delete all windows on a desktop then no
keybinding work. i needed t use my commented out workaround actually
and then a bit. @fix
it seems to create override-redirect popup windows that it FOCUSES
instead of grabbking the kbd like most other menu windows
so this causes the parent window to lose focus in a way that then
causes the popups to dismiss instantly.
@fix
windows would vanish at times (eg dnd into an empty desktop in the
pager). this was pretty disconcerting and a problem, so this fixes it
with a bit of a sledgehammer, but it fixes it.
@fix
i got a whole mountain of eo invalid obj complaints from deskmirror
even on startup. the backtraces were long, but they all ended in
comp_object being invalid or null. it seesm deskmiror wasnt properly
tracking the deletion of comp_object outside and that led to this. i
simply set it up once and deleted it where it is no longer referenced
and all is good now. this may possibly in theory have led to odd bugs
but thanks to eo - unlikely.
@fix
Summary:
Moving _xdg_data_dirs_augment call to earlier in
initalisation process. Currently first-run will
leave XDG_MENU_PREFIX broken, thus the application
menu will be empty in E.
Seems eio_init might be the culprit.
Moved to above eio_init.
Test Plan:
* Launch E from X from a console (startx)
* Check application menu (empty).
* Apply patch.
* Launch E from X from a console (startx)
* E's Application menu should be populated.
Related to https://phab.enlightenment.org/D7534
Reviewers: #committers, raster, cedric, zmike, devilhorns
Reviewed By: #committers, zmike
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D7535
Wayland mouse acceleration uses different values (via libinput) than
X11 does. As such, we need to check the compositor type when creating
the Mouse Input config dialog and adjust values accordingly.
ref T7534
@fix
it wasn't working. first response may not be a 200 ident so keep
looking for them. also send a bit more than 1 byte to be sure, and
chekc the response is what we sent to be sure. also enforce a timeout
(10sec here) where we give up so it doesn't hang possibly forever.
all in all l2ping in e_sys works again. now. in the process i added a
timeout param too.
@fix
we had multiple drag resistance values here - unify with 1 and make it
work, now it gets it right deciding between dnd and a long press menu
etc. etc. ...
while also still using the new menu system.
This binding check/action handler was removed, because I am assuming
that the presumption was that the only binding/action that was handled
was showing a menu? This was actually not the case. This
binding/action handler handled resizing, moving, dragging, etc... on
gadgets on the desktop and in the gadget bar. Without it using gadgets
was near impossible on the desktop and inconvenient on the gadget bar.
The longpress menu was only getting cancelled if a drag occured at a
distance of least 25 pixels. This is due to the code checking for horizontal drag
distance + vertical drag distance >= 25. I believe the intent here was
to cancel drag if >= 5 vertically or >= 5 horizontally, not both. Most
drags wouldn't be 25 pixels in a single gadget such as pager, and a 25
pixel drag would not happen quick enough to offset longpress. This
commit also lowers the drag cancelling threshold to 3 pixels, not 5.
hold mode is where if u hold mosue down menu stays only as long as
mouse is held down... then dismissed on up. doesnt work well when youa
re trying to overload a single click with longpresses and so on -
optionally turn it off. used in gadgets.
now right click on any gagdte in bryce and they ALL have a menu that
allows removal of the gagdte bar or the gadget as well as access to
gadget settings AND the ability for gadgets to extendthis menu like
lunhcer does per icon. now it's standard behavior everywhere which is
much easier to use and discover. it also removes code from every
gadget to do their own "button 3" handling as its handled centrally
making the code in gadgets simpler.
this is part of my effort to improve usability (mostly discoverability
and accessibility of settings/features).
also long press left mouse gets u gadget right click menu
this has to move many modules/gadgets actions to mouse up instead of
mouse down so the bryce has a chance to trap the events first and set
hold flags. but now long press for 0.5 sec and bryce menu come sup
(with left mouse .. so touch friendly).
in addition move context menu hanbdling to e_gadget instead of in
bryce and in e_gadget. a context callback is called so different
systems can still do different things. this should probably change to
always pop up a mnenu and simple call populate callbacks for site
owner specific content.
all in all it makes the new gagdtes more consistent, easier to use
(without a right mouse button), doesn't need special action bindings
etc. etc.
bryce was missing the ability to espose orientation to the child
items, so they were the same irrespective of orientation.
i also notice that orientaiont is a simple horiz/vert ... so no
ability to special case corners etc. in the theme... :( not sure if
this should be changed.
also fix the aspect calculation to round up correctly to avoid
off-by-1 pixel gaps i noticed with the pager - necessary for the
styling in the flat theme to be right.
but is not explicitly linking against it. Previously this was not
discovered due to a wrong flag in elementaries pkgconfig. However - the
new .pc file of elementary does not contain dl anymore (as no library
_needs_ to link against it when using elm). So we need to link this here
explicitly
Differential Revision: https://phab.enlightenment.org/D7150
Summary:
Prevent wayland clients from being able to destroy the compositor's
singleton keymap by making individual copies for each client.
Reviewers: zmike, devilhorns
Reviewed By: zmike, devilhorns
Subscribers: cedric
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D6861
Summary:
evas functions
This fixes an issue when quickly mousing through menus can cause a
segfault in Enlightenment due to menu->comp_object being NULL
ref T7030
Reviewers: zmike
Reviewed By: zmike
Subscribers: cedric
Tags: #efl, #enlightenment22
Maniphest Tasks: T7030
Differential Revision: https://phab.enlightenment.org/D6641
elm wont switch profile on the fly if ELM_PROFILE is set this is
considered a custom override thus it stops working... so don't set it
- the elm config files should contain the right profiles to use.
follow on form 4c7b798b45 - really
remove from the alias hash. the alias id is different and should ave
been stored in the pixmap and be deleted when pixmap is freed. i had
it right to remove from the aliases hash too, but i used the wrong id
- i used the "core" pixmap id, not alias. this tracks and uses that
alias.
this means internal windows are reliable now and dont crash...
@fix.
on pixmap free only the pixmaps entry was deleted not the pixmaps hash
one. this led to lookup of stale pixmaps in the aliases hash... and
then a crash.
also use the correct local type with the correct byte order as well.
this has probably been an issue for a while but now internal windows
should work much better without crashes.
@fix
so a new bug in a gpu driver. if dpms is enabled, wakeup doesn't
happen. mouse doesn't do anything, rendering doesn't happen... i can
use the keyboard and ctrl+alt+enmd restart e or killall -HUP
enlightenment and e restarts and renders ... but nothing appears.
interestingly if i let it timeout again and wake it up a second
time... things render (but e is confused it seems and mouse input
doesnt work until i restart e). it's some kind of xorg/driver bug here
with this dpms - no dpms and all is fine. all e does with regards to
dplms is enable or disbale it (and set the timeouts) so e isn't doing
antyhign special otherwise with dpms on vs off ... so somethnig deeper
down the stack here, but to get a desktop that works at least for now,
add an option to not use dpms.
Summary:
in the case where deletion is deferred to preserve a window animation this
codepath may be triggered by a deleted client, at which point no render update
should occur in order to avoid compositor errors
ref f78eb3c108
fix T5203
Reviewers: ManMower, devilhorns
Reviewed By: devilhorns
Subscribers: netstar, cedric
Tags: #enlightenment-git
Maniphest Tasks: T5203
Differential Revision: https://phab.enlightenment.org/D6367
Summary:
these are all harmless but will trigger error messages from efl
ref T7030
Depends on D6315
Reviewers: ManMower, devilhorns
Reviewed By: devilhorns
Subscribers: cedric
Tags: #enlightenment-git
Maniphest Tasks: T7030
Differential Revision: https://phab.enlightenment.org/D6316
e was not properly handling the opacity hint in its 0-0xffffffff
range. in one case it converted e's color value to this range but just
with << 24 which is wrong as it then ignors the next 24 lower value
bits, so it should fill the next 3 bytes with repeats of the same
value to do this right, but far worse is on READING the value it just
used the value as-is as if it were a 0-ff (0-255) alpha value that we
use in evas and didnt "thunk it down" with val >> 24. this resulted in
renoise menus being blank as renoise set the opacity value on its
menu windows and e happily made them transparent thanks to this.
this fixes that.
not to peolpe fro the above. bitshifting DOWN is ok, but bitshifting
UP leaves the lower bits all 0 and you should fill this range with
repetitions of the value to properly scale in integert space with
bitshifts. :)
@fix
The symbol table fix on Linux doesn't translate well on BSD.
Adding code to use the older behaviour with the BSD systems
and retaining the new preferred behaviour when using dlopen(3)
on Linux.
so bluez itself wont go rfkill block or unblock the bt device. you
have to rfkill unblock separately if it's blocked. this is needed to
make bluez at a minimum work right. possibly should be added to
connman too. but this is the first step.
so i spent a few days lopening and closing the lids of a few laptops,
plugging and unplugging external screens in, plugging and unplugging
ac power and doing lots of combinations of these. this led to a whole
slew of interrealted issues that were pretty hard to detangle into
just single issues, so this is all one blob.
this fixes:
1. if a lid close gets a monitor unplug from x or e's randr wants to
unplug then this lead to slow unsuspend or lid open times as e was
reconfirguring the screens entireluy on lid open. dont do that. just
keep things as is, unless we have an external display, then reconfigure.
2. we had 2 systems monitoring for a wake. a poller and a systemd
event. this was redundant and lead to interesting things in the debug
output, so clean that up and on systemd systsems use the systemd wake
events
3. some systems dont shut down their screens on lid close, so they
stay open until screensaver timeouts kick in. bad. so also force the
screen to go off on lid close (if the lid screen is the only one we
have).
4. x seems to have a bug where if you force dpms off etc. to turn the
screen on, it still thinks it's of and wont dpms off again after that
until you eother give some input to have the wake event make the dpms
system in x think its now time to go on, or you toggle dpms on and
off, so i found toggling tricks x into thinking the right thing.
this makes some debugging also be consistent with printfs.
all in all i have a pretty well supported laptop doing swimmingly with
e and a not so well designed (acpi dsdt - missing many events like
acpi battery ones, ac power change acpi events, missing logic to power
off a closed screen in firmware or hardware and leaving it to sw...
not this laptop has a tocuh panel and extra fun points awarded since
the touch panel doesnt shut off on lid close... AND it reprots touch
events when it closes as it touches the keys/case... hooray! that has
another work-around local to my system, as efl has no mechanism to do
this).
@fix
Summary:
bluez4 support is now basically dead. nothing ships it anymore. bluez5
is a new api that is rather different so new code. also a new gui with
more complete features etc.
not everything is done as i'd like. need:
1. many more icons for device types (60-70 maybe?)
2. a few specific custom icons for some action buttons (like
pair/unpair)
3. icons for group headers
4. gadget status - the gagdte itself displays zero status. it's a
button to display a popup. that's all.
Reviewers: zmike!
Subscribers: devilhorns, cedric
Tags: #enlightenment-git
Differential Revision: https://phab.enlightenment.org/D6148
Under wayland, if a client declares itself iconified before its first
commit, we should wait until it's no longer iconified before sending it
a configure. This way it can avoid uselessly rendering buffers that
will never be displayed.
ref T6834
this fixes when you drag a wqindow to screen edge and it flips if you
use alt+drag as opposed to just dragging titlebar around without alt.
it fixes it by updating your config to allow "any modifier" for edge
flips which is actually correct.
@fix
handle quotes, escapes and so on for the shell command so you can do
things like Exec="ls" and it still work. this will also allow
executables with spaces in them as well with quotes or escapes as
backslash.
this fixes T6787
@fix
is e crashes, catches it and restarts while locked you end up
unlocked. this lets enlightenment_start know this lock down state and
it sets an env var to ensure locking happens on restart after recovery.
Turns out this is called too late in the render pass and a single frame
can occur with the old border setting. This can lead to nasty flicker
artifacts.
this moves to the newer mimeapps.list file in ~/.config from the older
defaults.list. it also provides a migration (copy file ovr if target
doesnt exist on e startup).
this fixes T6784
@fix
if no pam support detected at build time, dont even lock to begin
with. this should fix T6779
yes - even better is making pam a requirement for building and to be
optionallhy disabled, but then even if disabled we still need this check.
this has been a long long long standing bug in e. i think this is why
we had some reports of "any password unlocks e" - because it was built
without pam support and before auth was always succeeding without pam.
now it is always FAILING instead (which is probably better).
@fix
this should fix T6211 ensuring no drivers can cause a segfault at exit
time. this also happens to remove the enlightenment_sys -z option for
openbsd and unifies all the passwd checking into the single
enlightenment_ckpasswd binary util (that has ifdefs for openbsd,
freebsd and linux pam in it).
this simplifies code removing a mess of auth being done in multiple
places, removes special fork vs run 1 exe or a different exe in
different cases making it more maintainable. yes - this requires
enlightenment_ckpasswd to be setuid root, but it already was when it
was built.
@fix
If you have edje icons installed in your system (efreet smartly searches
the candidate icon based in your Icon= entry), they works correctly in
the menus, bar, etc... but doesn't works in the window borders icon,
this is because the code try's to add it without dealing with the .edj
extensions, probably attempting to load multiple image types and
returning some errors/warning, resulting in an empty icon in the window
borders
Fixes T6723
for objects without animations, it's important to instantly perform
state transitions in order to preserve intended visibility behaviors of
these objects and avoid race conditions due to asynchronous signal
processing
fix T6722
in the case where a window does not place with the smart placement algorithm,
clamp position to the top-left available position within the useful geometry
so that the titlebar will always be visible
this seems to happen to @manmower in T6619. it may just be timing
changes that changed the start loop time to be at init of ecore maybe ...
but it was doing a forced hide and not a clean "done"
that animates/fades. so fix this along with deferring show until the
first render pre.
this fixes T6619
a remaining client from before a restart which is maximized does not need its
position adjusted; this will cause it to go offscreen when unmaximized
ref T6414
Summary:
Drop deprecated Encoding key from desktop files
The Encoding key is no longer required, all desktop files are assumed to
be UTF-8 encoded. See details at:
https://standards.freedesktop.org/desktop-entry-spec/1.1/apc.html
Fix various typos and misspellings
lintian, Debian's package checker, uses strings to check for common typos
in compiled binaries. This change fixes the ones it identified in 0.22.1.
Reviewers: zmike!
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D5585
In EFL git head, this function has changed to be just
evas_object_coords_inside_get. This patch wraps the two different
function names around an #ifdef so we can check EFL version that we
are building against and call the correct function accordingly.
Fixes T6500
Signed-off-by: Chris Michael <cp.michael@samsung.com>
several override redirect windows are being forcibly re-placed by e.
they should not be. ever. this affects scim's IM panel i see and
chromium's menus. it probably affects more than this. this fixes both
of these cases for sure. probably more.
@fix
setting desk after e_client_new() completes is too late, as a desk will have
been automatically set by this time and any existing positioning data will
have been mangled in the process
fix T6317
previously this resulted in attempting to move the comp object before it
was created, but evas does not throw any errors when null is passed and so
it was never noticed
fix T6317
ref T6326
this was incorrectly referenced from weston's x11 compositor, which directly
uses xcb events and sends them as wl_pointer events. efl translates all input
events to use the same button scheme numbering, coincidentally enabling the use
of this code for all backends
this works around an apparently atexit() handler in nvidia drivers
that if you fork() a parent and do NOT exec() then the child process
will end up messing with the parent processes access to the nvidia
devices/display/whatever i believe via an atexit() handler because
moving from exit() to _exit() solves the issue. fixes T6197
@fix
Currently e_comp_util_has_x() will still return true after the X
machinery is shut down - this can lead to crashes on logout under
wayland when xwayland apps are running. Clearing the root window
id resolves this.
@ref T5593
XWayland likes to set a buffer on the cursor surface then delete it before
we release it. I'm pretty sure when a client does that we're within spec
to just kill it, but users will likely find this response ungratifying.
So, instead, just gracefully fail to render the undefined surface.
@ref T5593
cancel may destroy the selection source, resulting in invalid access
==10735== Invalid write of size 8
==10735== at 0x87C8095: wl_list_remove (wayland-util.c:56)
==10735== by 0x2EE745: _e_comp_wl_data_device_selection_set (e_comp_wl_data.c:506)
==10735== by 0x2EF241: _e_comp_wl_data_device_cb_selection_set (e_comp_wl_data.c:714)
==10735== by 0x1021F037: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==10735== by 0x1021EA99: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==10735== by 0x87C70C0: wl_closure_invoke (connection.c:935)
==10735== by 0x87C13C8: wl_client_connection_data (wayland-server.c:406)
==10735== by 0x87C4483: wl_event_source_fd_dispatch (event-loop.c:90)
==10735== by 0x87C4DE4: wl_event_loop_dispatch (event-loop.c:423)
==10735== by 0x85AE346: _cb_create_data (ecore_wl2_display.c:399)
==10735== by 0x946857A: _ecore_call_fd_cb (ecore_private.h:347)
==10735== by 0x946AE51: _ecore_main_fd_handlers_call (ecore_main.c:2015)
==10735== by 0x946B823: _ecore_main_loop_iterate_internal (ecore_main.c:2403)
==10735== by 0x946935E: ecore_main_loop_begin (ecore_main.c:1308)
==10735== by 0x151139: main (e_main.c:1088)
==10735== Address 0x222ca980 is 16 bytes inside a block of size 136 free'd
==10735== at 0x4C2CE1B: free (vg_replace_malloc.c:530)
==10735== by 0x2F076F: e_comp_wl_clipboard_source_unref (e_comp_wl_data.c:1291)
==10735== by 0x214C6A09: _xwayland_send_cancelled (dnd.c:149)
==10735== by 0x2EE71D: _e_comp_wl_data_device_selection_set (e_comp_wl_data.c:504)
==10735== by 0x2EF241: _e_comp_wl_data_device_cb_selection_set (e_comp_wl_data.c:714)
==10735== by 0x1021F037: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==10735== by 0x1021EA99: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==10735== by 0x87C70C0: wl_closure_invoke (connection.c:935)
==10735== by 0x87C13C8: wl_client_connection_data (wayland-server.c:406)
==10735== by 0x87C4483: wl_event_source_fd_dispatch (event-loop.c:90)
==10735== by 0x87C4DE4: wl_event_loop_dispatch (event-loop.c:423)
==10735== by 0x85AE346: _cb_create_data (ecore_wl2_display.c:399)
==10735== by 0x946857A: _ecore_call_fd_cb (ecore_private.h:347)
==10735== by 0x946AE51: _ecore_main_fd_handlers_call (ecore_main.c:2015)
==10735== by 0x946B823: _ecore_main_loop_iterate_internal (ecore_main.c:2403)
==10735== by 0x946935E: ecore_main_loop_begin (ecore_main.c:1308)
==10735== by 0x151139: main (e_main.c:1088)
==10735== Block was alloc'd at
==10735== at 0x4C2DC05: calloc (vg_replace_malloc.c:711)
==10735== by 0x2F0520: e_comp_wl_clipboard_source_create (e_comp_wl_data.c:1231)
==10735== by 0x214C71C9: _xwl_selection_notify (dnd.c:286)
==10735== by 0x946130C: _ecore_call_handler_cb (ecore_private.h:331)
==10735== by 0x94626BC: _ecore_event_call (ecore_events.c:629)
==10735== by 0x946B83E: _ecore_main_loop_iterate_internal (ecore_main.c:2408)
==10735== by 0x946935E: ecore_main_loop_begin (ecore_main.c:1308)
==10735== by 0x151139: main (e_main.c:1088)
so if you closed the lid ANd didn't have external screens ANd had ac
plugged in ... e would suspend even if youdidn't have "suspend on ac"
checked in blanking dialog. respect this and handle it properly.
@fix
side note... i've notced acpid no longer reporting lid events on one
of my systems. this is very sucky. you now have to open
/dev/input/event2 (this may vary from device to device) to get lid
events... it's an input device. this means elput needs to start doing
this as we cant get power button or lid events anymore .... and we may
have to do this for x11 too.
comp_type is not set during initial pointer creation on startup but will be set at
the point of xwl startup, so use a check which will succeed
fix T6157
ref 2b8c70fe98
this laptop wakes from suspend if you plug or unplug it while
suspended. this leads to bad things. fix nthis by checking lid state
and resuspending if this happens.
@fix
this function is mainly for rescaling maximized/fullscreen clients to fit new
dimensions, so don't call on other clients since this can trigger unwanted resize
events
This reverts commit 40e8bb044c.
EFL master solves this properly
EFL stable currently has a bug that solves this accidentally
so there's a window of about 3 commits in git where it's a problem,
and nobody should run those commits in production :)
This fix caused some problems when restarting E, as stdin would
cloexec and then the following startup would try to set cloexec
on an invalid fd and generate an err that generated a cri because
of an invalid log domain.
Someone should probably figure out the log domain thing.
commit b9d166f804 introduced
safer exe functions that both prevent a child from having E's
stdin/stdout/stderr and ensure the child's fd 0 (and 1 and 2) are
"valid" file descriptors (to work around some buggy software that
assumes 0 is an invalid file descriptor)
This commit uses the safer functions when launching child programs from
the desktop menu as well.
ref T5606
@fix
this is specifically needed for wayland but is relevant to x with
startx too ... dont let processes that e runs like apps inherit
stdin/out/err as it may be a tty and thus allow apps to do nasty
things with that tty.
@fix
Turns out ecore_animator_add() can randomly pick the wrong canvas to use as
a tick source. Using EFL_EVENT_ANIMATOR_TICK on the compositor evas instead
will ensure we don't accidentally pick an internal window for a tick source.
Fix T6070
"
I have a directory at the head of my PATH that contains alternate
versions of command line utils like grep, ls, etc., but E puts
/usr/bin ahead of it, overriding my tools of choice with the system
defaults.
If my understanding is correct, the only way currently to have
directories that E prepends to your PATH appended instead is to use
-i-really-know-what-i-am-doing-and-accept-full-responsibility-for-it.
I'd like to see a more sane option if there isn't one already.
Alternatively, I wonder if it wouldn't be a better idea to only
prepend directories to PATH if they aren't already contained within
it--thereby preserving the user's desired search order.
"
this should fix T5953
@fix
in any case where client needs to be rescaled to use new screen geometry
certain things must happen, such as handling shaded state and forcing the
new geometry to be applied
This adds the icon associated with the file type to the preview.
If there's no artwork available the audio preview will no longer
be a large void, the mimetype icon will display.
so some other clients like mpv also try to explicitly position their
windows (like centering on screen 0 ALWAYS) and this now gets caught
up in trying to detect libreoffice doing the same thing for
presentations. so only support this is the app has explicitly
requested initial positionin explicitly and then use pending configures.
It looks like the only way we can get here with NULL resource data
is when we explicitly cleared it in the del hook, meaning the client
is dead to us. In this case it's ok to ignore the cursor set request.
ref T4988
Previously we immediately kicked back the frame callback when a client
sent a surface frame without damage. This let clients that use frames
for timing proceed, but they generally just send another frame right
away and spin in this way until they reach their intended render time.
Now we use animators so the frame callbacks will be limited to the
animator tick source's frequency.
ref T5850
if the window being moved to a new desktop is focused, then ensure
after the move to restore focus to the last focused in the focus stack
for this desk to something stays focused.
@fix
this is actually broken, as is entire the concept of using mixed e+elm configs.
if a user manually changes the profile, e.g., for a single app, then this will
overwrite the global profile name. similarly, setting the profile in this manner
overwrites the global profile, causing all existing apps to switch to that profile
this is a rectangle which dynamically resizes based on the available space
in the bar. it can only be added when autosize is disabled, and setting
autosize will remove all spacers
fix T5914
This only skips writing the profile name to
~/.e/e/config/profile.cfg
This allows easier testing of E with custom profiles.
Note that this goes together with another patch in elementary, but the
env var is different (note: we could use a single one). This is only
meant for debugging.
export E_CONF_PROFILE_NOSAVE=1
when an app tries to position itself before being shown, attempt to store this
and apply it in order to effectively handle cases where an app attempts to show
on a specific screen, e.g., presentation apps which show a console on one monitor
and the presentation on a different monitor
fix T1571
there's too many properties to create flags/events for all of them, so just use this
if it's one of the many misc props
currently only used for skip_{pager,taskbar,winlist}
x11 modifier handling in events is broken: the modifier state is the state from
before the event, meaning that pressing caps lock will never result in an event where
the modifier is not set in the corresponding event
wayland handles this more sensibly, though it should be detected on key up rather
than key down
fix T5737
e_client_under_pointer_get() ignores overrides.
ref 3ee5a0378d
fix T5878, T5871
IF ONLY THERE WERE SOME METHOD FOR TESTING COMMITS BEFORE THEY WERE PUSHED
e_start isnt really using evas atm - cserve2 env vars arent being set
so remove it - e_start can start a little faster with less linking...
good for startup time perhaps and mem footprint of e_start while it
babysits
Weston's dmabuf implementation continues to be modular enough that we can
pull it in with minimal change.
This updates us to version 3 of the protocol - required by recent mesa to
use dmabuf buffers instead of wl_drm ones.
Currently only contains stubs for format query.
ecore_drm2 supersedes this, ecore_drm is deprecated, and we depend on
an efl version newer than the deprecation, so none of this code should
ever be built.
so we egnore some mouse in evets due to their flags (crossing events
thansk to grab changes or other stuff) that we want to ignore for
other reasons like when a popup menu happens and so on... so if we get
a mouse in... 0.1 sec later double check where the pointer is with a
poll then fix focus. this should patch over a long standing annoyance
here in x11.
@fix
this allows a wayland client to request that a given action name be bound
to the requested surface using a mode to restrict activation of the binding
modes include:
* shared
- activated when any surface from the client has focus
* topmost
- activated when the requested surface has focus and is the topmost client
* exclusive
- activated when the requested surface has focus; blocks other action routes
#SamsungFeatures
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Carsten Haitzler
Michael Bouchaud (yoz)
Christopher Michael
Alastair Poole
Stephen Houston
Marcel Hollerbach
Derek Foreman
Chris Michael
Mike Blumenkrantz
Stephen Houston
Mike Blumenkrantz
Thanatermesis
Ross Vandegrift
Amitesh Singh
Chidambar Zinnoury
Jean-Philippe Andre
Marcel Hollerbach
Cedric Bail